Flashing NEC 4551a with 1z firmware

vbimport

#1

My drive is starting to give me problems when burning a DL drive it craped out on me and gave me this error.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <_NEC DVD_RW ND-4551A> Version: 1-Z2 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-4551A >Version: 1-Z2 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-4551A atapi Port 0 ID 1 DMA: On
DiskPeripheral : SAMSUNG HD040GJ nvata Port 2 ID 0 DMA: Off
DiskPeripheral : Maxtor 6G160E0 nvata Port 2 ID 2 DMA: Off
DiskPeripheral : Maxtor 4W040H3 nvata Port 3 ID 0 DMA: Off
DiskPeripheral : WDC WD1200JB-00FUA0 nvata Port 3 ID 2 DMA: Off
DiskPeripheral : WDC WD2500KS-00MJB0 nvata Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-4551A E: CDRom1
HL-DT-ST CD-RW GCE-8481B G: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 554MB (568164kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.1.2007
UDF/ISO compilation
3:31:46 AM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started

3:31:46 AM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)

3:31:46 AM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

3:31:46 AM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted

3:31:46 AM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

3:31:46 AM #6 Text 0 File Reader.cpp, Line 124
Reader running

3:31:46 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: _NEC DVD_RW ND-4551A running

3:31:46 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

3:31:46 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

3:31:46 AM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

3:31:46 AM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2795983 (621:19.58, 5460MB)

3:31:46 AM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

3:31:46 AM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: _NEC DVD_RW ND-4551A, Media type: DVD+R9 Double Layer

3:31:46 AM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<

3:31:46 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2795984 (2795984) = #2795984/621:19.59
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2795984 blocks [E: _NEC DVD_RW ND-4551A]

3:31:46 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: _NEC DVD_RW ND-4551A] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5726175232, ISRC “”
DAO layout:

Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2795984 | lead-out | 1 | 0x41 | 0x00

3:31:46 AM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:31:46 AM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

3:31:47 AM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

3:31:47 AM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

3:31:47 AM #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5,540 KB/s)

3:31:47 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:32:27 AM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x038ada00: Len x804

3:32:27 AM #24 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 1398016 (155500h, 2730MB) -> OK, confirmed setting

3:32:27 AM #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1

3:32:27 AM #26 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

3:32:27 AM #27 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x038ada00: Len x804

3:32:27 AM #28 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 499, Book Type selected in EEPROM, command version 4

3:32:27 AM #29 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xC9 02 02 01 42 54 59 50 45 01 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x03878a00: Len x6

3:32:27 AM #30 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 499, Book Type selected in EEPROM, command version 4

3:32:27 AM #31 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 499, Book Type selected in EEPROM, command version 4

3:32:27 AM #32 Text 0 File DVDR.cpp, Line 5505
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

3:32:27 AM #33 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM

3:32:27 AM #34 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

3:36:49 AM #35 SPTI -1093 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1093)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 00 00 05 48 E0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02
Buffer x03cf0000: Len x10000
0x00 00 01 BA 44 55 1F 42 DC 83 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 B6 2B 21 02 D9 09 CB 2C 0F
0x6E 1E 6C 03 52 30 EA 51 FF E0 01 80 0C A8 4E 62

3:36:49 AM #36 CDR -1093 File Writer.cpp, Line 302
No seek complete
E: _NEC DVD_RW ND-4551A

3:36:49 AM #37 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:36:49 AM #38 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:36:50 AM #39 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

3:36:50 AM #40 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03

3:36:50 AM #41 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders

3:36:50 AM #42 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully

3:36:50 AM #43 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 499, Book Type selected in RAM, command version 4

3:36:50 AM #44 Text 0 File DVDR.cpp, Line 6468
Book Type counter: 499, Book Type selected in RAM, command version 4

3:36:50 AM #45 Text 0 File DVDR.cpp, Line 5505
Drive: _NEC DVD_RW ND-4551A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0

3:36:50 AM #46 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5,540 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I posted in after dark and was told to update my Firmware but with the firmware I’ve got it said on the readme file update to 1.08 if you have 1.07 and I don’t have 1.07 I got 1z2 from Liggy’s and Dee’s firmware update.

I don’t wanna waste any more DL discs so I want to update my firmware but with what … please help me thanks.


#2

Read the sticky >>> BINFLASH.