Firmware NEC 3530A.help me

I have a drive dvd NEC 5330a, it had the firmware 2,01

Yesterday I have adjourned him to the firmware 3,23 for 5330a
it seemed all ok,the pc identify,

http://img181.imageshack.us/img181/2710/avviopcxt0.jpg

but the drive not work,if I insert a dvd it makes noise ta ta ta ta ta ta,e doesn’t read dvd
How can I do to put another firmware?

I have perhaps tried street DOS,ma I don’t know the commands correct DOS

http://img255.imageshack.us/img255/3855/promphz3.jpg

do you help me?:bow:

thanks

CLARA
(I am italian,not speak English)
:disagree:
:flower:

If you want to flash your drive, it’s probably easier for you to use the Windows GUI version of Binflash. If you want to work with the commandline version, make sure to use the “-” sign when adding options.

:flower:

hello,tanks to the answer:cool:

I have heard that you powers miraculous in resolving the problems of driver :wink:

http://club.cdfreaks.com/f86/my-3530…d-help-196288/

I have approximately the same problem:sad:
And I do not understand how he has fixed problem


The firmware 3.23 I flash in the my drive with binflash GUI

But now the firmware for irmettere 2.01 if you use binflash GUI me error, see the pictures of my screen under:

http://img153.imageshack.us/img153/8048/binflashwin1id9.jpg

http://img385.imageshack.us/img385/4216/binflashwin2ms7.jpg

http://img381.imageshack.us/img381/3192/binflashwin3zy3.jpg

If I continue me error [B] ERROR WHILE FLASHING FIRMWARE
:sad:

[/B]I have also tried in DOS, but I find it hard type just commands

http://img393.imageshack.us/img393/4079/dosbinflashmh6.jpg

I am not clear how type, where leave spaces…
The burner on my PC is called E
For example to save the firmware of the burner do not understand how I need to use:
[I]
necflash dump-v-s-namefirmware.bin E:[/I]

or
[I]
necflash-dump-v-namefirmware-E:[/I]

or

[I]necflash dump v s namefirmware E[/I]

ecc ecc…:sad::sad::sad::sad:

Sorry, I know are incapable

:iagree::flower:

very very tahnks

Clara

Looks like your IDE drivers (do you have nForce drivers installed?) do not forward all required commands to the drive, so flashing in DOS might actually help.

The command for dumping your old firmware would be

nachflash -dump -v -s oldfirmware E:

[quote=Liggy;2063782]Looks like your IDE drivers (do you have nForce drivers installed?) do not forward all required commands to the drive, so flashing in DOS might actually help.

The command for dumping your old firmware would be

nachflash -dump -v -s oldfirmware E:

[/quote]

:flower:
hello very thanks
I have made a step ahead
I was at least recognized a command in DOS

necflash -dump -v -s oldfirmware E:

http://img102.imageshack.us/img102/7739/dumpdosdi3.jpg
But it is error:sad:

with the command dump, has given me that screen only once, while other times: ERROR OPENING SCSI DEVICE


is on the PC I have something nforce believe

The video card is invidia
http://img205.imageshack.us/img205/7987/gforceck8.jpg

may create problems?

There are solutions?

I hope that I must not throw out the window the dvd writer nec…

:disagree::disagree::disagree:

:p:flower:

hello

Clara

Perhaps it is not important…

But I have also 1 on the PC CD-writer virtual F:

I was installed the program Alchool120%

http://img518.imageshack.us/img518/387/masterizzfvirtualeqf6.jpg

In Device Manager but not in list

http://img266.imageshack.us/img266/5831/periferichele2.jpg
Perhaps for this I fail to flash the firmware?

:flower:

:flower:

Today I have tried to put the burner ON ANOTHER my old PC

On this PC, necflash works a little better

But it hung the same first to Rewrite the firmware:sad:

A screen dos

http://img518.imageshack.us/img518/663/dospcvecchiosm1.jpg

In this case I wanted put the 3.23 fast, but I have also tried with other

As you see, tells me to a problem of bootcode

I am continue the program, but then says; ERROR ENTERING SAFE MODE

I believe I have done everything that it is possible, alone in addition I cannot do

:sad::sad:

goodbye
:slight_smile: