Lite-On SHW-16H5S LS0W, 4148 MB burned at 4x
sold as “Emtec 8x DVD+R in jewel case”
MID: MCC-003-000
hub code: +R 18C+180360 U28A 1 1 2 0604020544-499
stamper code: DP-4.7G S02 TE
Fake Mitsubishi Chemicals DVD+R
HL-DT-ST DVD-RAM GSA-H55N 1.05, 4395 MB burned at 8x
sold as “Omega 16x DVD+R”
MID: MCC 004
unknown COO and manufacturer
supplied by EZ647:flower:
BENQ DVD DD DW1650 BCIC, 3,58 GB burned at 8x
sold as “X-Data 16x DVD+R”
MID: MCC 004
made in China by Shenzhen Topford Technology Development Ltd.
supplied by EZ647 
Writer: Samsung SH-224GB
Firmware: SB00
Media: Emtec DVD+R 8x
MID: (MCC 004)
Burn Speed: 14x
Software: Nero 12 Ess.
Burned 2017
Scanned 2017
Found this media in my Hardware-online-shop
Fake or not, I don´t know
Most likely fake. Can you post the serial and stamper numbers?
If there’s no stamper code, it’s a fake medium.
Thought so. I´ve looked over and over and don´t see an stamper code.
I guess Emtec had in the past also fake media
The media isn´t that bad, at least <3,5GB.
8x and MCC 004? How can this not be fake?
Don´t trust some exotic brands, I have also Titanum (by Esperanza) which labeled MBI 01RG40 as 8x instead of 16x
Writer: LG GH24NSC0
Firmware: LK00
Media: Prodye DVD+R 8x
MID: (MCC 003)
Burn Speed: 8x
Software: Nero 12 Ess.
Burned 2018
Scanned 2018
Very nice for a fake 
ASUS DRW-24B1LT 1.03, 4,01 GB burned at 8x
sold as “Emtec 16x DVD+R”
MID: MCC 004 (000)
made in Macau by Info Source Multi Media Ltd
Writer: Asus BC-12D2HT
Firmware: 3.01
Media: Titanum DVD+R 8x Made in China
MID: (MCC 004)
Burn Speed: 8x
Software: CDSpeed 4.7.7.16
Burned 2019
Scanned 2019
This media is very … special. My BDR-209E only offers 2x and 4x burn speed. The media sounds unbalanced, is very noisy in all drives I inserted it.
Titanum DVD+R 8x Made in China
No Hub Code
Stamper: MOGXPR-842
Writer: Pioneer DVR-S21
Firmware: 1.00
Media: Titanum DVD+R 8x Made in China
MID: (MCC 004)
Burn Speed: 8x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019
Writer: Samsung SH-222BB
Firmware: SB01
Media: Titanum DVD+R 8x Made in China
MID: (MCC 004)
Burn Speed: 8x
Software: Imgburn 2.5.8.0
Burned 2019
Scanned 2019
Ultron DVD+R printable 8x / MCC 003
Hub Code: DVD+R 2C+180349U28A1-1-1 0601172104-210248
Stamper Code: DP-4.7G S02 TE
Burned with Pioneer BDR-209EBK @4x (8x chosen)
Good, but not so good as real MCC 003
Did the Pioneer start and stay 4x or did it slow down?
It took more time to start than usual and then started right away with 4x.
Some kind of OPC? Had this behaviour with different writers and some different media.