Failed buring at 65%

I always burn fail at 65 % ler …Here my log file:

guda

1A20-Deleted Serial by Forum Moderator

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/27/2004 12:35:32 AM
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
(Nero Express)
Recorder: <DVDRW IDE H16X> Version: B02T - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVDRW IDE H16X >Version: B02T - HA 1 TA 1 - 6.6.0.14
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDS721680PLAT80 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDRW IDE H16X atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
DVDRW IDE H16X E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 759MB (777712kB)
Free physical memory: 379MB (388796kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.10.2008
ISO compilation
9:24:16 AM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:24:16 AM #2 Text 0 File Reader.cpp, Line 127
Reader running

9:24:16 AM #3 Text 0 File Writer.cpp, Line 122
Writer DVDRW IDE H16X running

9:24:16 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3297
First writeable address = 0 (0x00000000)

9:24:17 AM #5 Text 0 File Burncd.cpp, Line 3230
Turn on Disc-At-Once, using DVD media

9:24:17 AM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2215583 (492:21.08, 4327MB)

9:24:17 AM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)

9:24:17 AM #8 Text 0 File DlgWaitCD.cpp, Line 2433
Recorder: DVDRW IDE H16X, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

9:24:17 AM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:24:17 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2215584 (2215584) = #2215584/492:21.9
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2215584 blocks [DVDRW IDE H16X]
--------------------------------------------------------------

9:24:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [DVDRW IDE H16X] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4537516032, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2215584 | lead-out | 1 | 0x41 | 0x00

9:24:17 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:24:17 AM #13 Text 0 File Burncd.cpp, Line 4114
Cache writing successful.

9:24:17 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:24:17 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)

9:24:17 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:24:17 AM #17 Text 0 File DVDR.cpp, Line 2316
Recording mode: Sequential Recording Mode

9:24:17 AM #18 Text 0 File Mmc.cpp, Line 21592
Set BUFE: Super Link -> ON

9:24:17 AM #19 Text 0 File DVDR.cpp, Line 2470
Start write address at LBA 0
DVD high compatibility mode: Yes

9:24:17 AM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

9:24:44 AM #21 Text 0 File Cdrdrv.cpp, Line 1288
09:24:44.508 - DVDRW IDE H16X\H1 T1 : Queue again later

9:31:18 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BBA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x13 0x8B 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

9:31:18 AM #23 CDR -1135 File Writer.cpp, Line 311
Write error

9:31:18 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:31:19 AM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:31:19 AM #26 Text 0 File DVDR.cpp, Line 2708
EndDAO: Last written address was 1280895

9:31:19 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 9/1/2004 8:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Try burning again at 8X.

9:31:19 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)

[B]Disc Manufacturer: CMC MA - G. AM3[/B] Also try some better media like Verbatim or Taiyo Yuden.

still cannot la pls help ler …

is my burner spoil ?
but it can still read DVD ler…