Externe usb brander probleem

hallo ik heb een usb dvd brander met usb 1.1 en 2.0
toen ik hem aansloot en ging branden met 8 keer :S duurde bijna 2 uren
daarna wou ik een dvd branden met 16x nou het zelfde verhaal dat duurde anderhalf uur toen heb ik me laptop laten nakijken bleek dus te zijn dat ik de usb 2.0 drivers niet had geinsteleerd dus ik probeer weer te branden staat er bij nero als hij wil branden scsi fout :S dus ik boos en verwijderde bij software de 2.0 drivers van usb 2.0 daarna ging ik weer branden toen brande hij de dvds wel alleen duurde 2 uren en later instaleerde ik usb 2.0 en weer het zelfde verhaal scsi fout :S wie kan me helpen

technische info hier
Cypress AT2LP externe behuizing met usb 2.0
NEC 3550 DVD +/- Rewriter 16x
usb sis 7001

Mag ik vragen welke USB2.0 drivers je installeert? Probeer je gebruik te maken van drivers van SiS zelf, of van een andere partij (bijv MS)?

van sis zelf gebruik ik ze maar ik heb ook wel een fout rapport van nero die staat hier onder

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17-7-2002 9:20:56
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4
(Nero Express)
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.05 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <USB> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <QSI CDRW/DVD SBW-242>Version: UQ03 - HA 1 TA 0 - 7.0.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST92011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-242 E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 222MB (227824kB)
Free physical memory: 24MB (24928kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.2.2006
DVD-Copy on the fly
22:42:33 #1 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Toegang geweigerd.

22:42:33 #2 Text 0 File SCSIPassThrough.cpp, Line 119
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:42:33 #3 Text 0 File Cdrdrv.cpp, Line 9597
SPTIDismountVolume not successfull

22:42:53 #4 Text 0 File SCSIPassThrough.cpp, Line 58
Error on LockVolume: Het volume voor een bestand is extern dusdanig gewijzigd dat het geopende bestand niet langer geldig is.

22:42:53 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 35840KB of Memory

22:42:53 #6 Text 0 File Reader.cpp, Line 124
Reader running

22:42:53 #7 Text 0 File Writer.cpp, Line 113
Writer F: _NEC DVD_RW ND-3550A running

22:42:53 #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-ROM
S01 T01 Con 0x14 Start 0 Len 2151120 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

22:42:53 #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 2151120 = 2151120, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

22:42:53 #10 Text 0 File Burncd.cpp, Line 3342
Turn on Disc-At-Once, using DVD media

22:42:53 #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2151119 (478:01.44, 4201MB)

22:42:53 #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

22:42:53 #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

22:42:53 #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:42:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2151120 (2151120) = #2151120/478:1.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151120 blocks [F: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------

22:42:53 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405493760, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep
____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2151120 | lead-out | 1 | 0x41 | 0x00

22:42:54 #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

22:42:54 #18 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11.080 KB/s)

22:42:54 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

22:42:54 #20 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode

22:42:54 #21 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

22:42:54 #22 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

22:42:54 #23 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

22:43:06 #24 SPTI -600 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x06ec0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

22:43:06 #25 CDR -600 File Writer.cpp, Line 302
Device not available
F: _NEC DVD_RW ND-3550A

22:43:06 #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

22:43:06 #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

22:43:06 #28 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was -1

22:43:43 #29 SPTI -1169 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x03489c00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 02 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

22:43:43 #30 SPTI -1169 File SCSIPassThrough.cpp, Line 323
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x55 10 00 00 00 00 00 00 3C 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 08
Buffer x03489c00: Len x3c
0x00 00 00 00 00 00 00 00 05 32 01 C4 08 00 00 00
0x00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

22:43:44 #31 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11.080 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 17-7-2002 8:53:02
File ‘Drivers\InCDfs.SYS’: Ver=5, 0, 0, 4, size=101760 bytes, created 14-10-2005 12:00:36 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDpass.SYS’: Ver=5, 0, 0, 4, size=29440 bytes, created 14-10-2005 12:01:56 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\InCDrec.SYS’: Ver=5, 0, 0, 4, size=8704 bytes, created 14-10-2005 12:00:32 (InCD4 driver for win NT/2K/XP)
File ‘Drivers\usb8023.sys’: Ver=5.1.2600.0 (xpclient.010817-1148), size=11136 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbcamd.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=23808 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbcamd2.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=23936 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbccgp.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=24960 bytes, created 17-8-2001 22:03:32 (Adapter driver for rec)
File ‘Drivers\usbd.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=4736 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbehci.sys’: Ver=5.1.2600.0 built by: WinDDK, size=17920 bytes, created 19-2-2006 22:38:50 (Adapter driver for rec)
File ‘Drivers\usbhub.sys’: Ver=5.1.2600.41 (xpclnt_qfe.010827-1803), size=51584 bytes, created 1-4-2002 14:37:36 (Adapter driver for rec)
File ‘Drivers\usbintel.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=15104 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbohci.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=15616 bytes, created 7-9-2001 13:00:00 (Adapter driver for rec)
File ‘Drivers\usbport.sys’: Ver=5.1.2600.41 (xpclnt_qfe.010827-1803), size=134016 bytes, created 1-4-2002 14:36:42 (Adapter driver for rec)
File ‘Drivers\usbprint.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=24832 bytes, created 17-8-2001 22:00:30 (Adapter driver for rec)
File ‘Drivers\usbscan.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=13824 bytes, created 17-8-2001 21:53:30 (Adapter driver for rec)
File ‘Drivers\USBSTOR.SYS’: Ver=5.1.2600.0 (XPClient.010817-1148), size=21760 bytes, created 17-8-2001 22:03:22 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)