Even the Pioneers can't burn LONGTEN001 well

vbimport

#1

Greetings.
First post in the Pioneer forum. :stuck_out_tongue:
I purchased a 50 pack of LONGTEN001 DVD-R media.
The discs were purchased at www.shop4tech.com as 4X thermal printable media.
This media is very crappy! When burnt on my NEC 2500A or LiteOn 411s, PI/PO scans are always above ‘recommended’ values.
So I figured I would give this media a shot in a friends’ Pioneer 105.
First up is a DVDInfoPro shot of the burner info:


#2

Here is a PI/PO error scan done on the disc, which was burned with the Pioneer 105.

General Information
Drive: LITE-ON DVDRW LDW-411S
Firmware: FS0H
Disc: DVD-R (LONGTEN 001)
Selected speed: 4 X
PI errors
Maximum: 1102
Average: 386.35
Total: 6115310
PI failures
Maximum: 7
Average: 1.08
Total: 22382
PO failures: n/a
Jitter: n/a
Scanning statistics
Number of samples: 123200
Average scanning interval: 1.16 ECC
Glitches removed: 0



#3

And here we have the DVDSpeed transfer rate test:



#4

Conclusion: This media is very sucky! But the NEC2500A burns it the best!