Errors in Nero (can burn cd-rw no cd-r)

Hi guys,

I hope you can help me out. I have regged special to this forum to ask help for the following problem.

I keep getting errors in Nero when I try to burn cd-r’s. cd-rw’s are not a problem.

This is my set up:
Windows XP
Nero 7.10.1.0
_NEC DVD_RW ND-1300A

I have uninstalled and reinstalled Nero, no difference.
I have tried to update firmware from the NEC, no difference.
I have googled a lot, also on this forum, and found some solutions about DMA. So i checked the primairy IDE and secundairy IDE, and they both now say DMA if available.

I get different error codes, when I try to simulate I get this:
Write error
Invalid write state
Could not perform EndTrack
Simulation failed at 16x (2.400 KB/s)

When I try to burn something, Nero says:
Please insert a disc bla bla. Disc required cd-r/cdr-rw
Disc type in recorder: (Empty)

But there is already an empty disc (I use Emtec) in there!

This was the error log of simulation I did yesterday:

1C82-0000-19E5-MAAX-4003-0461-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.10 - HA 1 TA 7 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <H + H DVD-ROM DVD-41SD>Version: 4.10 - HA 1 TA 2 - 7.10.1.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 0 DMA: Off
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 1 DMA: Off
CdRomPeripheral : H + H DVD-ROM DVD-41SD4.10 vcsmpdrv Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8162B D: CdRom0
_NEC DVD_RW ND-1300A E: CdRom7
H + H DVD-ROM DVD-41SD CdRom2
H + H DVD-ROM DVD-41SD CdRom3
H + H DVD-ROM DVD-41SD CdRom4

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 116MB (119528kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.2.2009
CD-ROM (ISO)
22:06:01 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

22:06:01 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

22:06:01 #3 Text 0 File Burncd.cpp, Line 3196
_NEC DVD_RW ND-1300A
Buffer underrun protection activated

22:06:01 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

22:06:01 #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using CD-R/RW media

22:06:01 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 5660 ( 1:17.35)

22:06:01 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

22:06:01 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: _NEC DVD_RW ND-1300A;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

22:06:01 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:06:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 5661 (5661) = #5661/1:15.36
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5659 blocks [E: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------

22:06:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: _NEC DVD_RW ND-1300A] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 11900928, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 5661 | 0 | 0x00
5661 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

22:06:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 5661 -> 5659.

22:06:01 #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

22:06:01 #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

22:06:01 #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

22:06:01 #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

22:06:01 #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

22:06:01 #18 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 16x (2.400 KB/s)

22:06:02 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

22:06:02 #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

22:06:02 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

22:06:52 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom7: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 FF FF FF 6A 0A 00 00 00 00 0C
Buffer x08b10580: Len x10000
0x57 7D B6 E6 B1 DE 43 8B 55 4A 6E 11 CB 67 A9 72
0x78 40 33 A1 8B 88 48 DC 32 07 D4 84 76 8B 18 EE
0x75 47 93 3B C4 7C AC 98 46 C1 EC 55 18 25 1F 18

22:06:52 #23 CDR -1135 File Writer.cpp, Line 303
Write error
E: _NEC DVD_RW ND-1300A

22:06:52 #24 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
E: _NEC DVD_RW ND-1300A

22:06:52 #25 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

22:06:52 #26 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 16x (2.400 KB/s)

22:06:53 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:06:57 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

22:06:57 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Any help is welcome, I hope I did not make too much mistakes, 'cause Im from Holland. Thanks.

I’m sorry I mean,

Can burn [B]DVD-RW[/B], but can’t burn CD-R or CD-RW.

(I havent tried burning DVD-R, probably won’t work either)

Additional info:
I tried to erase a RW DVD an got a Power Calibiration error…