Error writing DVD, Readhat, Sony USB DRU-700A

vbimport

#1

Hi,

We are trying to write to a DVD using Nero for linux and are having frequent failures. That is, we get about 1 in 5 successful burns (using growisofs). So we had a go with Nero for linux and got the following result (failure after burning 60%). Can anyone suggest things we might check or what might be cuasing this problem?

The log follows.

Red Hat Linux 3.3.3-7 2.6.10-1.12_FC2smp
Nero API version: 6.6.0.8
Using interface version: 6.6.0.8
Installed in: /usr/share/nero
Application: Ahead Software AG\NeroLINUX
Recorder: <SONY DVD RW DRU-700A> Version: VY04 - HA 1 TA 0 - 0.0.0.0
Adapter driver: <usb-storage> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2026MB (2075124kB)
Free physical memory: 83MB (85872kB)
Memory in use : 95 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.4.2005
NeroAPI
11:48:17 #1 Text 0 File Reader.cpp, Line 127
Reader running

11:48:17 #2 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-700A running

11:48:17 #3 ISO9660GEN -11 File Geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

11:48:18 #4 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

11:48:19 #5 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2289679 (508:49.04, 4472MB)

11:48:19 #6 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO

11:48:19 #7 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: SONY DVD RW DRU-700A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

11:48:19 #8 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:48:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2289680 (2289680) = #2289680/508:49.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289680 blocks [SONY DVD RW DRU-700A]
--------------------------------------------------------------

11:48:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-700A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4689264640, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2289680 | lead-out | 1 | 0x41 | 0x00

11:48:19 #11 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

11:48:19 #12 Text 0 File Burncd.cpp, Line 4037
Cache writing successful.

11:48:19 #13 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

11:48:19 #14 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11080 KB/s)

11:48:19 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:48:20 #16 Text 0 File DVDR.cpp, Line 2199
Recording mode: Sequential Recording Mode

11:48:20 #17 Text 0 File MMC.cpp, Line 21254
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

11:48:20 #18 Text 0 File DVDR.cpp, Line 2345
Start write address at LBA 0
DVD high compatibility mode: Yes

11:48:20 #19 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

11:48:47 #20 Text 0 File Cdrdrv.cpp, Line 1287
11:48:47 - SONY DVD RW DRU-700A\H1 T0 : Queue again later

12:46:35 #21 SCSI -1135 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0xB10FE600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x03 (0x0B, SCSI_TASTATUS_FAILED)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:46:35 #22 SCSI -1023 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00BA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x05 (0x0B, SCSI_TASTATUS_FAILED)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x14 0x97 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

12:46:35 #23 CDR -1135 File Writer.cpp, Line 311
Write error
SONY DVD RW DRU-700A\H1 T0

12:46:36 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:46:36 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:46:36 #26 Text 0 File DVDR.cpp, Line 2582
EndDAO: Last written address was 1349599

12:46:36 #27 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11080 KB/s)

[01.04.2005]------------------------------------
11:48:15 Robot error messages from:
====== *** NeroAPI, History File *** ======