Error while burning

“Could not perform EndTrack” while trying to burn a movie as a Data CD in nero.
Also I got “Error : Writing Error: (3) Error occurred writing data to disc. A flaw exists in the Power calibration area (1048). Error Sense Data: SENSE KEY: 3 ASC: 73 ASCQ: 3” in cdburnerxp pro 3.

this is the log for nero:

**
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.04 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8522B>Version: 1.02 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS728080PLAT20 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8522B atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : HL-DT-ST CD-RW GCE-8526B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : FY4724U USS733A 2.0B a1h5d25p Port 2 ID 0 DMA: Off
CdRomPeripheral : CC5056N WEF553U 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8522B D: CDRom0
HL-DT-ST CD-RW GCE-8526B E: CDRom1
CC5056N WEF553U F: CDRom3
FY4724U USS733A G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 194MB (199516kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.6.2007
CD-ROM (ISO)
19:52:46 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:52:46 #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:52:46 #3 Text 0 File Burncd.cpp, Line 3187
HL-DT-ST CD-RW GCE-8526B
Buffer underrun protection activated

19:52:46 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

19:52:46 #5 Text 0 File Burncd.cpp, Line 3499
Turn on Track-At-Once, using CD-R/RW media

19:52:46 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358486 ( 79:41.61)

19:52:46 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

19:52:46 #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

19:52:46 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:52:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358487 (358487) = #358487/79:39.62
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358485 blocks [E: HL-DT-ST CD-RW GCE-8526B]
--------------------------------------------------------------

19:52:46 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST CD-RW GCE-8526B] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 734488576, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358487 | 0 | 0x00
358487 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

19:52:46 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 358487 -> 358485.

19:52:46 #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

19:52:46 #14 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

19:52:46 #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

19:52:46 #16 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.

19:52:46 #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

19:52:46 #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 52x (7,800 KB/s)

19:52:47 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:52:47 #20 Text 0 File MMC.cpp, Line 22344
Set BUFE: Buffer underrun protection -> ON

19:52:47 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

19:52:48 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0a370040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

19:52:48 #23 CDR -1106 File Writer.cpp, Line 303
Power calibration error
E: HL-DT-ST CD-RW GCE-8526B

19:52:48 #24 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: HL-DT-ST CD-RW GCE-8526B

19:52:48 #25 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

19:52:48 #26 Text 0 File MMC.cpp, Line 17098
<ä±ˆä­âµ”å‘“äŒ€âµ„å’äœ ä‘ƒåˆ­â—ä‡âµ…ã”¸ã˜²â‚ã„€ã€®4Ä€> start Close Session

19:52:49 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 52x (7,800 KB/s)

19:52:49 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:52:51 #29 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed

19:52:51 #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Help ?