Error Message - Please Help!

vbimport

#1

I’m not the most tech savy person, but I’ve been using DVD Shrink 3.1 and Nero for a few months with very few problems (unable to decrypt), but over the past couple of days, I’ve been getting this error message. Oddly enough, some DVD’s will burn fine, but then others give this log: PLEASE HELP!!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.0.0.0
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVD-RW GSA-H11N>Version: JG03 - HA 3 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD3200BB-00KEA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 3 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1918MB (1964520kB)
Free physical memory: 1055MB (1081152kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.2.2007
NeroAPI
5:49:40 PM #1 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

5:49:40 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

5:49:40 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVD-RW GSA-H11N running

5:49:40 PM #4 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

5:49:40 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

5:49:41 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

5:49:41 PM #7 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

5:50:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

5:50:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

5:50:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

5:50:26 PM #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

5:50:26 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------

5:50:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

5:50:26 PM #14 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

5:50:26 PM #15 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

5:50:26 PM #16 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

5:50:26 PM #17 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)

5:50:26 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:50:26 PM #19 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC…
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 …MCC…004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

5:50:26 PM #20 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: Yes

5:52:34 PM #21 SCSI -1039 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x00D40000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x06 0xD5 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x04 0x0E 0x09 0x01

5:52:34 PM #22 CDR -1039 File Writer.cpp, Line 304
Focus or tracking error

5:52:34 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:52:34 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

5:52:34 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x04 0x0E 0x09 0x01

5:52:34 PM #26 Phase 127 File APIProgress.cpp, Line 273
Generating DVD high compatibility borders

5:52:37 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x00 0x35 0x31 0x0E 0x72 0x03

5:52:37 PM #28 CDR -1039 File WriterStatus.cpp, Line 164
Focus or tracking error
HL-DT-ST DVD-RW GSA-H11N\H3 T0

5:52:37 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

5:52:37 PM #30 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 16x (22,160 KB/s)

5:52:37 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

5:52:37 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File ‘Drivers\CDRALW2K.SYS’: Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 7:30:18 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.26a, size=20576 bytes, created 5/13/2005 4:54:10 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

You need to slow down the burn speed to probably 4x. Try that and see what happens.


#3

From your log it seems you have a problem with your drive… the log says
[B]Sense Key: 0x04 (KEY_HARDWARE_ERROR)[/B]. Just check the conenctions etc probbaly clean the drive.


#4

See this [B]Focus or tracking error
HL-DT-ST DVD-RW GSA-H11N\H3 T0[/B]

So it means your are having trouble with the drive i guess…just try cleaning the lens…maybe thats why u r able to burn some dvds and not all…