Error in Filewriter.cpp

vbimport

#1

help i have a write eroor i can’t fix it.
Here’s the log
Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.12
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 156MB (160564kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.8.2005
Copy disc to image
9:40:37 PM #1 Text 0 File Reader.cpp, Line 118
Reader running

9:40:37 PM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

9:40:37 PM #3 Phase 48 File dlgbrnst.cpp, Line 1836
Analyzing disc

9:40:37 PM #4 CDCOPY -1 File CDCopy.cpp, Line 1896
The CD is copyrighted

9:40:39 PM #5 Text 0 File CDCopy.cpp, Line 2116
Index0 Index1 PostPause __LastBlockOfTrack
Track 1: 0 0 ( 0:02.00) 3152 3151 ( 0:44.01)
Track 2: 3152 3302 ( 0:46.02) 6580 6579 ( 1:29.54)
Track 3: 6580 6730 ( 1:31.55) 321526 321525 ( 71:29.00)
Track 4: 321526 321676 ( 71:31.01) 327140 327139 ( 72:43.64)
Track 5: 327140 327290 ( 72:45.65) 330037 330036 ( 73:22.36)
Track 6: 330037 330187 ( 73:24.37) 333776 333775 ( 74:12.25)
Track 7: 333776 333926 ( 74:14.26) 336575 336574 ( 74:49.49)
Track 8: 336575 336725 ( 74:51.50) 339685 339684 ( 75:31.09)
Track 9: 339685 339835 ( 75:33.10) 342472 342471 ( 76:08.21)

9:40:39 PM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 3302 = 3302, data (TRM_DATA_RAW_MODE2, block size 2352)
02. 3302 - 6730 = 3428, data (TRM_DATA_RAW_MODE2, block size 2352)
03. 6730 - 321676 = 314946, data (TRM_DATA_RAW_MODE2, block size 2352)
04. 321676 - 327290 = 5614, data (TRM_DATA_RAW_MODE2, block size 2352)
05. 327290 - 330187 = 2897, data (TRM_DATA_RAW_MODE2, block size 2352)
06. 330187 - 333926 = 3739, data (TRM_DATA_RAW_MODE2, block size 2352)
07. 333926 - 336725 = 2799, data (TRM_DATA_RAW_MODE2, block size 2352)
08. 336725 - 339835 = 3110, data (TRM_DATA_RAW_MODE2, block size 2352)
09. 339835 - 342472 = 2637, data (TRM_DATA_RAW_MODE2, block size 2352)

9:40:40 PM #7 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

9:40:40 PM #8 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2147483646 (477218:37.21)
Last address to be written: 342471 ( 76:08.21)

9:40:40 PM #9 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

9:40:40 PM #10 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

9:40:40 PM #11 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:40:40 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (1 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #0 + 3152 (3152) = #3152/0:42.2
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 3152 blocks [ Image Recorder ]
1: TRM_DATA_MODE2_2336 (2 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #3302 + 3278 (3278) = #6580/1:27.55
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 3278 blocks [ Image Recorder ]
2: TRM_DATA_MODE2_2336 (3 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #6730 + 314796 (314796) = #321526/71:27.1
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 314796 blocks [ Image Recorder ]
3: TRM_DATA_MODE2_2336 (4 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #321676 + 5464 (5464) = #327140/72:41.65
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 5464 blocks [ Image Recorder ]
4: TRM_DATA_MODE2_2336 (5 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #327290 + 2747 (2747) = #330037/73:20.37
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 2747 blocks [ Image Recorder ]
5: TRM_DATA_MODE2_2336 (6 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #330187 + 3589 (3589) = #333776/74:10.26
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 3589 blocks [ Image Recorder ]
6: TRM_DATA_MODE2_2336 (7 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #333926 + 2649 (2649) = #336575/74:47.50
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 2649 blocks [ Image Recorder ]
7: TRM_DATA_MODE2_2336 (8 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #336725 + 2960 (2960) = #339685/75:29.10
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 2960 blocks [ Image Recorder ]
8: TRM_DATA_MODE2_2336 (9 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #339835 + 2637 (2637) = #342472/76:6.22
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 2637 blocks [ Image Recorder ]
--------------------------------------------------------------

9:40:40 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 9:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 7713472, ISRC “”
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 7713472 8063872 15721280, ISRC “”
3: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 15721280 16071680 751435136, ISRC “”
4: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 751435136 751785536 764549440, ISRC “”
5: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 764549440 764899840 771316832, ISRC “”
6: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 771316832 771667232 780051136, ISRC “”
7: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 780051136 780401536 786589600, ISRC “”
8: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 786589600 786940000 793854560, ISRC “”
9: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 793854560 794204960 800364992, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
3152 | 2 | 0 | 0x00 | 0x41
3302 | 2 | 1 | 0x00 | 0x41
6580 | 3 | 0 | 0x00 | 0x41
6730 | 3 | 1 | 0x00 | 0x41
321526 | 4 | 0 | 0x00 | 0x41
321676 | 4 | 1 | 0x00 | 0x41
327140 | 5 | 0 | 0x00 | 0x41
327290 | 5 | 1 | 0x00 | 0x41
330037 | 6 | 0 | 0x00 | 0x41
330187 | 6 | 1 | 0x00 | 0x41
333776 | 7 | 0 | 0x00 | 0x41
333926 | 7 | 1 | 0x00 | 0x41
336575 | 8 | 0 | 0x00 | 0x41
336725 | 8 | 1 | 0x00 | 0x41
339685 | 9 | 0 | 0x00 | 0x41
339835 | 9 | 1 | 0x00 | 0x41
342472 | lead-out | 1 | 0x00 | 0x41

9:40:40 PM #14 Phase 120 File dlgbrnst.cpp, Line 1836
Creating the image for burning

9:40:40 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

9:40:40 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, patch infos, orig at #3302): write at #3302

9:40:40 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, patch infos, orig at #6730): write at #6730

9:40:40 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 3 (relocatable, no disc pos, patch infos, orig at #321676): write at #321676

9:40:40 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 4 (relocatable, no disc pos, patch infos, orig at #327290): write at #327290

9:40:40 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 5 (relocatable, no disc pos, patch infos, orig at #330187): write at #330187

9:40:40 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 6 (relocatable, no disc pos, patch infos, orig at #333926): write at #333926

9:40:40 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 7 (relocatable, no disc pos, patch infos, orig at #336725): write at #336725

9:40:40 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 8 (relocatable, no disc pos, patch infos, orig at #339835): write at #339835

9:48:52 PM #24 SCSI -1093 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x32 0xFB 0x00 0x00 0x1C 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

9:49:20 PM #25 SCSI -1047 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x33 0x6B 0x00 0x00 0x1C 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

9:49:36 PM #26 SCSI -1093 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x33 0x87 0x00 0x00 0x1C 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

9:49:49 PM #27 SCSI -1093 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02541680
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x33 0x9B 0x00 0x00 0x01 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

9:49:49 PM #28 CDCOPY -12 File TrackPFile.cpp, Line 276
Unrecoverable read error at
75:47.16

9:49:56 PM #29 Text 0 File TrackPFile.cpp, Line 264
Read error from LBA 340891 to 340891

9:50:06 PM #30 SCSI -1093 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x33 0xBF 0x00 0x00 0x1C 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

9:50:24 PM #31 SCSI -1047 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02536000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0xBE 0x00 0x00 0x05 0x33 0xDB 0x00 0x00 0x1C 0x58 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

9:50:29 PM #32 Phase 40 File dlgbrnst.cpp, Line 1531
Aborted by user

9:50:32 PM #33 Phase 68 File dlgbrnst.cpp, Line 1836
Burn process aborted

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for src)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======
comp

1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 96MB (99212kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
Video CD
6:40:13 AM #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

6:40:14 AM #2 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

6:40:14 AM #3 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------

6:40:14 AM #4 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

6:40:14 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

6:40:14 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8526B running

6:40:14 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:40:14 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:40:14 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

6:40:39 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 340879 ( 75:47.04)

6:40:39 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

6:40:39 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

6:40:39 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)

6:40:39 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1456 (1456) = #1456/0:19.31
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1456 blocks [HL-DT-ST CD-RW GCE-8526B ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original disc pos #0 + 3291 (3291) = #3291/0:43.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3291 blocks [HL-DT-ST CD-RW GCE-8526B ]
2: TRM_DATA_MODE2_2336 (AVSEQ02)
2 indices, index0 (150) not provided
original disc pos #0 + 314809 (314809) = #314809/69:57.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 314809 blocks [HL-DT-ST CD-RW GCE-8526B ]
3: TRM_DATA_MODE2_2336 (AVSEQ03)
2 indices, index0 (150) not provided
original disc pos #0 + 5477 (5477) = #5477/1:13.2
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 5477 blocks [HL-DT-ST CD-RW GCE-8526B ]
4: TRM_DATA_MODE2_2336 (AVSEQ04)
2 indices, index0 (150) not provided
original disc pos #0 + 2760 (2760) = #2760/0:36.60
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 2760 blocks [HL-DT-ST CD-RW GCE-8526B ]
5: TRM_DATA_MODE2_2336 (AVSEQ05)
2 indices, index0 (150) not provided
original disc pos #0 + 3602 (3602) = #3602/0:48.2
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3602 blocks [HL-DT-ST CD-RW GCE-8526B ]
6: TRM_DATA_MODE2_2336 (AVSEQ06)
2 indices, index0 (150) not provided
original disc pos #0 + 2662 (2662) = #2662/0:35.37
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 2662 blocks [HL-DT-ST CD-RW GCE-8526B ]
7: TRM_DATA_MODE2_2336 (AVSEQ07)
2 indices, index0 (150) not provided
original disc pos #0 + 2973 (2973) = #2973/0:39.48
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 2973 blocks [HL-DT-ST CD-RW GCE-8526B ]
8: TRM_DATA_MODE2_2336 (AVSEQ08)
2 indices, index0 (150) not provided
original disc pos #0 + 2650 (2650) = #2650/0:35.25
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 2650 blocks [HL-DT-ST CD-RW GCE-8526B ]
--------------------------------------------------------------

6:40:39 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST CD-RW GCE-8526B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 9:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3777312, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3777312 4130112 11870544, ISRC “”
3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 11870544 12223344 752654112, ISRC “”
4: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 752654112 753006912 765888816, ISRC “”
5: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 765888816 766241616 772733136, ISRC “”
6: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 772733136 773085936 781557840, ISRC “”
7: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 781557840 781910640 788171664, ISRC “”
8: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 788171664 788524464 795516960, ISRC “”
9: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 795516960 795869760 802102560, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1456 | 2 | 0 | 0x00 | 0x41
1606 | 2 | 1 | 0x00 | 0x41
4897 | 3 | 0 | 0x00 | 0x41
5047 | 3 | 1 | 0x00 | 0x41
319856 | 4 | 0 | 0x00 | 0x41
320006 | 4 | 1 | 0x00 | 0x41
325483 | 5 | 0 | 0x00 | 0x41
325633 | 5 | 1 | 0x00 | 0x41
328393 | 6 | 0 | 0x00 | 0x41
328543 | 6 | 1 | 0x00 | 0x41
332145 | 7 | 0 | 0x00 | 0x41
332295 | 7 | 1 | 0x00 | 0x41
334957 | 8 | 0 | 0x00 | 0x41
335107 | 8 | 1 | 0x00 | 0x41
338080 | 9 | 0 | 0x00 | 0x41
338230 | 9 | 1 | 0x00 | 0x41
340880 | lead-out | 1 | 0x00 | 0x41

6:40:39 AM #16 Phase 73 File dlgbrnst.cpp, Line 1836
Preparing items

6:40:41 AM #17 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

6:40:41 AM #18 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

6:40:41 AM #19 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

6:40:41 AM #20 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 52x (7,800 KB/s)

6:40:41 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:40:41 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1606

6:40:41 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #5047

6:40:41 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #320006

6:40:41 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #325633

6:40:41 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #328543

6:40:41 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #332295

6:40:41 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #335107

6:40:41 AM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #338230

6:40:41 AM #30 Text 0 File Mmc.cpp, Line 15558
StartDAO : CD-Text - Off

6:40:42 AM #31 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

6:40:42 AM #32 Text 0 File Mmc.cpp, Line 15845
CueData, Len=160
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 15 1f
41 02 01 21 00 00 17 1f
41 03 00 21 00 01 07 16
41 03 01 21 00 01 09 16
41 04 00 21 00 47 06 38
41 04 01 21 00 47 08 38
41 05 00 21 00 48 15 3a
41 05 01 21 00 48 17 3a
41 06 00 21 00 49 00 2b
41 06 01 21 00 49 02 2b
41 07 00 21 00 49 32 2d
41 07 01 21 00 49 34 2d
41 08 00 21 00 4a 1c 07
41 08 01 21 00 4a 1e 07
41 09 00 21 00 4b 09 37
41 09 01 21 00 4b 0b 37
41 aa 01 34 00 4b 2f 05

6:48:57 AM #33 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02550000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x01 0x1D 0x49 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

6:48:57 AM #34 CDR -1135 File Writer.cpp, Line 304
Write error

6:48:57 AM #35 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:48:57 AM #36 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:49:00 AM #37 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

6:49:00 AM #38 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 52x (7,800 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======
comp

1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 113MB (116112kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
Video CD
7:01:41 AM #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

7:01:41 AM #2 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:01:41 AM #3 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------

7:01:41 AM #4 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

7:01:41 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

7:01:41 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8526B running

7:01:41 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:01:41 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:01:41 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

7:01:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 319704 ( 71:04.54)

7:01:41 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

7:01:41 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

7:01:41 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:01:41 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1305 (1305) = #1305/0:17.30
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1305 blocks [HL-DT-ST CD-RW GCE-8526B ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original disc pos #0 + 3291 (3291) = #3291/0:43.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3291 blocks [HL-DT-ST CD-RW GCE-8526B ]
2: TRM_DATA_MODE2_2336 (AVSEQ02)
2 indices, index0 (150) not provided
original disc pos #0 + 314809 (314809) = #314809/69:57.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 314809 blocks [HL-DT-ST CD-RW GCE-8526B ]
--------------------------------------------------------------

7:01:42 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST CD-RW GCE-8526B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 3:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3422160, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3422160 3774960 11515392, ISRC “”
3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 11515392 11868192 752298960, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1305 | 2 | 0 | 0x00 | 0x41
1455 | 2 | 1 | 0x00 | 0x41
4746 | 3 | 0 | 0x00 | 0x41
4896 | 3 | 1 | 0x00 | 0x41
319705 | lead-out | 1 | 0x00 | 0x41

7:01:42 AM #16 Phase 73 File dlgbrnst.cpp, Line 1836
Preparing items

7:01:42 AM #17 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

7:01:43 AM #18 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

7:01:43 AM #19 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

7:01:43 AM #20 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 52x (7,800 KB/s)

7:01:43 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:01:43 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1455

7:01:43 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #4896

7:01:43 AM #24 Text 0 File Mmc.cpp, Line 15558
StartDAO : CD-Text - Off

7:01:43 AM #25 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

7:01:43 AM #26 Text 0 File Mmc.cpp, Line 15845
CueData, Len=64
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 1e
41 02 01 21 00 00 15 1e
41 03 00 21 00 01 05 15
41 03 01 21 00 01 07 15
41 aa 01 34 00 47 04 37

7:03:56 AM #27 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02570000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x58 0x1A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

7:03:56 AM #28 CDR -1135 File Writer.cpp, Line 304
Write error

7:03:57 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:03:57 AM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

7:03:58 AM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

7:03:58 AM #32 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 52x (7,800 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======
comp

1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 153MB (156840kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
Video CD
7:09:19 AM #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

7:09:19 AM #2 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:09:19 AM #3 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------

7:09:19 AM #4 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

7:09:19 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

7:09:19 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:09:19 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:09:20 AM #8 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

7:09:34 AM #9 Phase 40 File dlgbrnst.cpp, Line 1836
Aborted by user

7:09:34 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Disc check failed: Medium not writable (Wrong CD)

7:09:34 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

7:09:34 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST CD-RW GCE-8526B
Medium not present

7:09:34 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======
comp

1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 101MB (104416kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
Video CD
9:14:16 AM #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

9:14:17 AM #2 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:14:17 AM #3 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------

9:14:17 AM #4 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

9:14:17 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

9:14:17 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8526B running

9:14:17 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

9:14:17 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

9:14:17 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

9:14:49 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 319704 ( 71:04.54)

9:14:49 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

9:14:49 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:14:49 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

9:14:49 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1305 (1305) = #1305/0:17.30
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1305 blocks [HL-DT-ST CD-RW GCE-8526B ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original disc pos #0 + 3291 (3291) = #3291/0:43.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3291 blocks [HL-DT-ST CD-RW GCE-8526B ]
2: TRM_DATA_MODE2_2336 (AVSEQ02)
2 indices, index0 (150) not provided
original disc pos #0 + 314809 (314809) = #314809/69:57.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 314809 blocks [HL-DT-ST CD-RW GCE-8526B ]
--------------------------------------------------------------

9:14:49 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST CD-RW GCE-8526B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 3:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3422160, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3422160 3774960 11515392, ISRC “”
3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 11515392 11868192 752298960, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1305 | 2 | 0 | 0x00 | 0x41
1455 | 2 | 1 | 0x00 | 0x41
4746 | 3 | 0 | 0x00 | 0x41
4896 | 3 | 1 | 0x00 | 0x41
319705 | lead-out | 1 | 0x00 | 0x41

9:14:49 AM #16 Phase 73 File dlgbrnst.cpp, Line 1836
Preparing items

9:14:50 AM #17 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

9:14:50 AM #18 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

9:14:50 AM #19 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

9:14:50 AM #20 Phase 28 File dlgbrnst.cpp, Line 1836
Speed measurement started

9:14:50 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:14:50 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1455

9:14:50 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #4896

9:18:14 AM #24 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST CD-RW GCE-8526B > start writing Lead-Out at LBA 319705 (4E0D9h), lenght 0 blocks

9:18:14 AM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:18:14 AM #26 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

9:18:14 AM #27 Phase 29 File dlgbrnst.cpp, Line 1787
Speed measurement completed: 21.9x (3,294 KB/s)

9:18:14 AM #28 Text 0 File Burncd.cpp, Line 4242
Can only write at 16x instead of 52x, because speed of source data is too slow

9:18:14 AM #29 Phase 32 File dlgbrnst.cpp, Line 1836
Simulation started at 16x (2,400 KB/s)

9:18:14 AM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:18:14 AM #31 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1455

9:18:14 AM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #4896

9:18:14 AM #33 Text 0 File Mmc.cpp, Line 15558
StartDAO : CD-Text - Off

9:18:14 AM #34 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

9:18:14 AM #35 Text 0 File Mmc.cpp, Line 15845
CueData, Len=64
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 1e
41 02 01 21 00 00 15 1e
41 03 00 21 00 01 05 15
41 03 01 21 00 01 07 15
41 aa 01 34 00 47 04 37

9:28:35 AM #36 Text 0 File WriterStatus.cpp, Line 115
<HL-DT-ST CD-RW GCE-8526B > start writing Lead-Out at LBA 319705 (4E0D9h), lenght 0 blocks

9:28:46 AM #37 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:28:46 AM #38 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

9:28:46 AM #39 Phase 33 File dlgbrnst.cpp, Line 1836
Simulation completed successfully at 16x (2,400 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======
comp

1A20-020E-0000-1349-1210-6697*

Windows 98 4.10
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=1, 0, 0, 0, size=36864 bytes, created 4/23/99 10:22:00 PM
ahead WinASPI: File ‘C:\PROGRAM FILES\AHEAD\NERO\NERO\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/03 8:18:06 PM
Nero version: 6.3.1.12 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8526B>Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8526B >Version: 1.03 - HA 0 TA 0 - 6.3.1.12
Adapter driver: <ESDI_506> HA 0
HL-DT-ST CD-RW GCE-8526B (Target 0, E:): Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (260628kB)
Free physical memory: 102MB (105316kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2005
Video CD
9:29:34 AM #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

9:29:34 AM #2 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:29:35 AM #3 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: NTSC
-----------------------------------------------------

9:29:35 AM #4 Phase 90 File dlgbrnst.cpp, Line 1836
Buffer Underrun Protection activated

9:29:35 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

9:29:35 AM #6 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8526B running

9:29:35 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

9:29:35 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

9:29:35 AM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-at-once, using CD-R/RW media

9:29:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 319704 ( 71:04.54)

9:29:35 AM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

9:29:35 AM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST CD-RW GCE-8526B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

9:29:35 AM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:29:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1305 (1305) = #1305/0:17.30
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1305 blocks [HL-DT-ST CD-RW GCE-8526B ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original disc pos #0 + 3291 (3291) = #3291/0:43.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3291 blocks [HL-DT-ST CD-RW GCE-8526B ]
2: TRM_DATA_MODE2_2336 (AVSEQ02)
2 indices, index0 (150) not provided
original disc pos #0 + 314809 (314809) = #314809/69:57.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 314809 blocks [HL-DT-ST CD-RW GCE-8526B ]
--------------------------------------------------------------

9:29:35 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST CD-RW GCE-8526B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 3:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3422160, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3422160 3774960 11515392, ISRC “”
3: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 11515392 11868192 752298960, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1305 | 2 | 0 | 0x00 | 0x41
1455 | 2 | 1 | 0x00 | 0x41
4746 | 3 | 0 | 0x00 | 0x41
4896 | 3 | 1 | 0x00 | 0x41
319705 | lead-out | 1 | 0x00 | 0x41

9:29:35 AM #16 Phase 73 File dlgbrnst.cpp, Line 1836
Preparing items

9:29:36 AM #17 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

9:29:36 AM #18 Text 0 File Burncd.cpp, Line 4177
Cache writing successful.

9:29:36 AM #19 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

9:29:36 AM #20 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 16x (2,400 KB/s)

9:29:36 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:29:36 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1455

9:29:36 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #4896

9:29:36 AM #24 Text 0 File Mmc.cpp, Line 15558
StartDAO : CD-Text - Off

9:29:36 AM #25 Text 0 File Mmc.cpp, Line 20173
Set BUFE: supported -> ON

9:29:36 AM #26 Text 0 File Mmc.cpp, Line 15845
CueData, Len=64
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 1e
41 02 01 21 00 00 15 1e
41 03 00 21 00 01 05 15
41 03 01 21 00 01 07 15
41 aa 01 34 00 47 04 37

9:33:26 AM #27 SCSI -1135 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x02570000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x72 0xC9 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

9:33:26 AM #28 CDR -1135 File Writer.cpp, Line 304
Write error

9:33:27 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

9:33:27 AM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

9:33:28 AM #31 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

9:33:28 AM #32 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 16x (2,400 KB/s)

Existing drivers:
File ‘IoSubSys\SCSI1HLP.VXD’: Ver=4.10.1998, size=19270 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\NEROCD95.VXD’: Ver=4.5.0.14, size=39882 bytes, created 3/11/02 11:55:38 AM
File ‘IoSubsys\DRVWPPQT.VXD’: Ver=3.10.36a, size=228223 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\CDFS.VXD’: Ver=4.10.1998, size=59133 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM
File ‘…\System\Vmm32\Ios.vxd’: Ver=4.10.2222, size=69570 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\Disktsd.vxd’: Ver=4.10.2222, size=18809 bytes, created 4/23/99 10:22:00 PM
File ‘IoSubsys\ESDI_506.PDR’: Ver=4.10.2222, size=24406 bytes, created 4/23/99 10:22:00 PM (Adapter driver for rec)

Registry Keys:

====== *** Nero-Burning Rom, History File *** ======