Error "failed to set L0 zone data capacity"

vbimport

#1

Hallo everybody.
I have a trouble trying to burn xbox360 backups.
I have a laptop dvd burner gca 4080N fw 0w33 (it is an LG drive). I’ve read it is ok for xbox backups but something doesn’t work because i ever have the message fomr imageburn “failed to set L0 zone data capacity”.
May be it need a firmware upgrade or poor disk quality.
Did anyone has this kind of trouble? how do you got rid of it?
Thankyou in advance
Stefano

Imgburner log:

I 18:57:23 Source File: G:\all-tru.dvd
I 18:57:23 Source File Sectors: 3,825,924 (MODE1/2048)
I 18:57:23 Source File Size: 7,835,492,352 bytes
I 18:57:23 Source File Volume Identifier: XGD2DVD_NTSC
I 18:57:23 Source File Volume Set Identifier: 34672923
I 18:57:23 Source File Implementation Identifier: Sonic Scenarist 3.1
I 18:57:23 Source File File System(s): ISO9660; UDF (1.02)
I 18:57:23 Destination Device: [2:0:0] HL-DT-ST DVD-RW GCA-4080N 0W33 (D:) (ATA)
I 18:57:23 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 2.4x; 4x)
I 18:57:23 Destination Media Sectors: 3,827,520
I 18:57:23 Write Mode: DVD
I 18:57:23 Write Type: DAO
I 18:57:23 Write Speed: 2.4x
I 18:57:23 Link Size: Auto
I 18:57:23 Test Mode: No
I 18:57:23 OPC: No
I 18:57:23 BURN-Proof: Enabled
I 18:57:23 Book Type Setting: DVD-ROM
I 18:57:23 Optimal L0 Data Zone Capacity: 1,913,760
I 18:57:23 Optimal L0 Data Zone Method: Copied From Original Disc
E 18:57:25 Failed to set L0 Data Zone Capacity!
E 18:57:25 Reason: Invalid Field in Parameter List
E 18:57:26 Operation Failed! - Duration: 00:00:02
I 18:57:26 Average Write Rate: N/A - Maximum Write Rate: N/A


#2

I answer to myself.
It was a poor quality media. Everything worked fine with verbatim +R DL mediacode MKM 01


#3

Hi all,

Just a quick question. I’m using Verbatim DVD+R DL 2.4x.

I had a failed burn with ImgBurn initially, it got stuck at trying to Read the disc around this point:

I 14:16:09 BURN-Proof: Enabled
I 14:16:09 Book Type Setting: N/A
I 14:16:09 Optimal L0 Data Zone Capacity: 1,913,760
I 14:16:09 Optimal L0 Data Zone Method: Copied From Original Disc

So i closed it all down… popped out the DL disc and put it back in and started again.
and this is what i got:

I 14:16:09 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20L NR02 (E:) (ATA)
I 14:16:09 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x)
I 14:16:09 Destination Media Sectors: 3,827,520
I 14:16:09 Write Mode: DVD
I 14:16:09 Write Type: DAO
I 14:16:09 Write Speed: 2.4x
I 14:16:09 Link Size: Auto
I 14:16:09 Test Mode: No
I 14:16:09 OPC: No
I 14:16:09 BURN-Proof: Enabled
I 14:16:09 Book Type Setting: N/A
I 14:16:09 Optimal L0 Data Zone Capacity: 1,913,760
I 14:16:09 Optimal L0 Data Zone Method: Copied From Original Disc
W 14:16:14 Failed to set L0 Data Zone Capacity!
W 14:16:15 Reason: Invalid Field in Parameter List
I 14:16:15 Filling Buffer… (40 MB)
I 14:16:17 Writing LeadIn…
I 14:17:06 Writing Session 1 of 1… (1 Track, LBA: 0 - 3825923)
I 14:17:06 Writing Track 1 of 1… (MODE1/2048, LBA: 0 - 3825923)
I 14:17:06 Writing Layer 0… (LBA: 0 - 1913759)

This message:
W 14:16:14 Failed to set L0 Data Zone Capacity!
W 14:16:15 Reason: Invalid Field in Parameter List

It seems to be burning, will this be successful even though i got this error message?

Cheers.