Error burning DL DVD (BenQ DVD RW DW1625 black Lightscribe)

vbimport

#1

[qanda]This thread is about the BenQ DW1625. Click here to see full specs[/qanda]I’ve read around and tried to find an answer, but I’d be gratefull if someone could look at my log and igve me a hint as to what is going on:

Jappy

Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File ‘C:Program FilesNeroNero 7CoreWnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 12:54:32

NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
(Nero Express)
Recorder: <BENQ DVD DD DW1625> Version: BBIA - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <BENQ DVD DD DW1625 >Version: BBIA - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
: ST3160827AS 3.42 nvstor32 Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1625 E: CDRom0

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095952kB)
Free physical memory: 1299MB (1330916kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.8.2008
ISO compilation
00:22:47 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:22:47 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

00:22:47 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

00:22:47 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

00:22:47 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4005423 (890:05.48, 7823MB)

00:22:47 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

00:22:48 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: BENQ DVD DD DW1625, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 0

00:22:48 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:22:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4005424 (4005424) = #4005424/890:5.49
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4005424 blocks [E: BENQ DVD DD DW1625]
--------------------------------------------------------------

00:22:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [E: BENQ DVD DD DW1625] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8203108352, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4005424 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4005424 | 0 | 0x00
4005424 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

00:22:48 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

00:22:48 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

00:22:48 #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

00:22:48 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

00:22:48 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 2.4x (3Â 324 KB/s)

00:22:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

00:22:48 #17 Text 0 File DVDPlusDualLayer.cpp, Line 475
Disc finalized, LBA total Image size: 4005424 (7823MB), Last LBA L0: 2002719 (3911MB)

00:22:48 #18 Text 0 File DVDPlusDualLayer.cpp, Line 640
L0 Data Zone Capacity set to 2002720 (1E8F20h, 3911MB) -> OK, confirmed setting

00:22:48 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
Burning Layer 1

00:22:48 #20 Text 0 File DVDPlusDualLayer.cpp, Line 677
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

00:22:48 #21 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 218F20 h (LBN: 1E8F20 h, 3911 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK…
Media type ID: S04
Product revision number: 66
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 00 52 49 54 45 4B - 00 00 00 53 30 34 42 40 …RITEK…S04B@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7…,l.,l…
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 …

00:22:48 #22 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: Current recorder setting

00:22:48 #23 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

00:23:38 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x190a0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:23:38 #25 CDR -1176 File Writer.cpp, Line 299
Session fixation error
E: BENQ DVD DD DW1625

00:23:38 #26 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

00:23:38 #27 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders

00:23:38 #28 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
E: BENQ DVD DD DW1625

00:23:38 #29 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

00:23:38 #30 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 2.4x (3Â 324 KB/s)

00:23:38 #31 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

00:24:07 #32 SPTI -600 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00

00:24:25 #33 SPTI -1176 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01

00:24:25 #34 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed

00:24:25 #35 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘DriversADPU160M.SYS’: Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 2006-11-02 05:50:35
File ‘DriversCDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 2006-10-04 22:42:42
File ‘DriversPXHELP20.SYS’: Ver=3.00.67a, size=43872 bytes, created 2008-02-22 22:38:33 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogon

Thanks!


#2

Always remove your serial # before posting your Nero Log. You are not using Verbatim Dual Layer, preferably made in Singapore, but made in India is still pretty well better than any of the rest. You are not using ImgBurn for your burning. Have you checked for a Firmware update on that BenQ?


#3

OK Thanks to Phil for editing the serial out, didn’t see that there…

I tried with ImgBurn and got the same result (as well as 2-3 other softwares). As far as I can tell, BBIA is the latest firmware (although dating back to 2005…)


#4

I have the same problem with the S04 Ritek media and I have same burner ,I tried it on mine Benq 1655 as well and it fails there to. Then I swapped the writing strategy from Ritek S04 to Ritek D01 it seems it helped 2 succes full burns on mine Benq 1655, but Benq 1625 refuses to burn. Try to find Ritek D01 00 those works on Benq 1625.