DW1650 burnd only 4x

Hi Community,

my two DW1650 burned only 4x of all my discs no matter what speed I choose.
I have tested this with firmware BCDC, BCFC, BCHC & BCIC.
But he read all burned discs with full 16x speed :frowning:
UDMA-2 is on in WinXP SP2.
ASPI-Driver V4.71a2 have installed. The problem is still available.

My three DW1655 and my two DW1640 & EW164B burned all selected speeds on same machine.

The DW1650 hangs on a GA-6BXD 440BX motherboard with a 40-wire cable on the secondary ide as master.

Have anyone my problem?:confused:

[I]I assume the “other” BenQ’s are not on $440 compu. :bigsmile:[/I]

Try and see if it helps with 80 conductor IDE cable. Don’t think it will get that much faster though.

BTW, I managed to get a DW1640 burn at 8x on my oldish 440LX box. :wink:

[QUOTE=pinto2;2041822][I]I assume the “other” BenQ’s are not on $440 compu. :bigsmile:[/I]

Try and see if it helps with 80 conductor IDE cable. Don’t think it will get that much faster though.

BTW, I managed to get a DW1640 burn at 8x on my oldish 440LX box. ;)[/QUOTE]Hi pinto2,

i have installed now a 80wire ide-cable. The problem is the same. My two DW1650 burns 4x by selected 8, 12 or 16x speed on all my discs.
Both DW1650 reads the burned disc with 16x.

I have the two 1650 for a test in a external case (Mapower KC51U2G) installed. The same problem. Both burned only 4x. All my other benq burner shows this problem not. Are both defect?