DW1625 problems with DL media

vbimport

#1

I just bought this Fujifilm DL and tried to burn one with nero. It failed. I don’t know why. I hope someone can tell me. Here’s the log. Thanks.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <BENQ DVD DD DW1625> Version: BBIA - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <BENQ DVD DD DW1625 >Version: BBIA - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD740GD-00FLA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1625 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC CD-W58E atapi Port 1 ID 1 DMA: On
DiskPeripheral : Maxtor 53073H6 DAC1 iteatapi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1625 D: CDRom0
TEAC CD-W58E E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 558MB (572092kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.6.2006
Burn DVD Image
3:33:40 PM #1 Text 0 File Burncd.cpp, Line 2948
BENQ DVD DD DW1625
Seamless Link activated

3:33:40 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

3:33:40 PM #3 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1625 running

3:33:40 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

3:33:40 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4145299 (921:10.49, 8096MB)

3:33:40 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

3:33:40 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: BENQ DVD DD DW1625, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0

3:33:40 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<

3:33:40 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 4145300 (4145300) = #4145300/921:10.50
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4145300 blocks [BENQ DVD DD DW1625]

3:33:40 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [BENQ DVD DD DW1625] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8489574400, ISRC “”
DAO layout:

Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4145300 | lead-out | 1 | 0x41 | 0x00

3:33:40 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

3:33:41 PM #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

3:33:41 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

3:33:41 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

3:33:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

3:33:41 PM #16 Text 0 File DVDPlusDualLayer.cpp, Line 459
Disc finalized, LBA total Image size: 4145300 (8096MB), Last LBA L0: 2072655 (4048MB)

3:33:41 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 614
L0 Data Zone Capacity set to 2072656 (1FA050h, 4048MB) -> OK, confirmed setting

3:33:41 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 641
Burning Layer 1

3:33:41 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 651
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

3:33:41 PM #20 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22A050 h (LBN: 1FA050 h, 4048 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK…
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16…63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 …RITEK…D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7…(d.(d…
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 …

3:33:41 PM #21 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: Current recorder setting

3:33:41 PM #22 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

3:37:32 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06C00000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x04 0x88 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

3:37:32 PM #24 CDR -1135 File Writer.cpp, Line 311
Write error

3:37:32 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:37:32 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:37:32 PM #27 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

3:37:32 PM #28 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

3:37:32 PM #29 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

3:37:32 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 1:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

The most likely reason for the write error is the media you are using. Ritek D01 are not recommended. Only Verbatims are recommended for DL burning.


#3

My drive is screwed up now, it doesn’t see any media at all. When I try to eject, the try comes out and goes right back in… Strange.


#4

Disc Manufacturer ID: RITEK, Media Type ID: D01,

Crap media. :Z


#5

Not necessarily. Test it in another computer.


#6

When I put in any kind of media CD or DVD nero or DVD Identifier doesn’t see it. I don’t have another PC to try it on right now. Any other suggestions?