DVR-215DBK DVD using Nero - Burn Fail at 12x several times now

vbimport

#1

[qanda]This thread is about the Pioneer DVR-215D. Click here to see full specs[/qanda]Hello I am using Nero Buring Rom V6.6 to burn an ISO data dvd using Verbatim DVD-R MCC 03RG20 on a Pioneer DVR-215DBK. It’s a new drive I got from New Egg and just started burning a bunch of DVDs this past weekend and twice now I got an error “Burn process failed at 12x”. It had firmware version 1.13 and I upgraded it to 1.18 but before I try again I wanted to know if anyone has any ideas as to why this might occur and if there are any clues from this log file extract below? Are there any settings I should change in Nero? I had burned at 12x instead of 8x for example from reading that modern burners work better now at higher speeds. Should I try 8x instead?


====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM 
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM 
Nero Version: 6.6.0.12
Internal Version: 6, 6, 0, 12c

Recorder:             <PIONEER DVD-RW  DVR-215D>Version: 1.13 - HA 1 TA 0 - 6.6.0.12
 Adapter driver:      <atapi>                   HA 1
 Drive buffer  :      2000kB
 Bus Type      :      via Inquiry data (1) -> ATAPI, detected: ATAPI 
 Connected to MMC as unknown drive with class-nr : 1
 Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM:               <TSSTcorp CDDVDW SH-S203B >Version: SB03 - HA 0 TA 1 - 6.6.0.12
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD3000GLFS-01F8U0            atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : TSSTcorp CDDVDW SH-S203B         atapi Port 0 ID 1  DMA: On 
CdRomPeripheral      : PIONEER DVD-RW  DVR-215D         atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVDRW LH-20A1S           atapi Port 1 ID 1  DMA: On 
DiskPeripheral       : ST3500320AS                      atapi Port 2 ID 0  DMA: On 
DiskPeripheral       : ST3500630AS                      atapi Port 3 ID 0  DMA: On 

=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S203B   D:   CDRom0
PIONEER DVD-RW  DVR-215D   G:   CDRom1
LITE-ON DVDRW LH-20A1S     H:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 2046MB (2095532kB)
Free physical memory: 1178MB (1206560kB)
Memory in use       : 42 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

2.9.2008
ISO compilation
9:39:37 PM	#1 Text 0 File Isodoc.cpp, Line 6194
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 2 (Max. of 31 chars)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
9:39:37 PM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
9:39:37 PM	#3 Text 0 File Writer.cpp, Line 122
	Writer PIONEER  DVD-RW  DVR-215D running
	
9:39:37 PM	#4 ISO9660GEN -11 File geniso.cpp, Line 3293
	First writeable address = 0 (0x00000000)
	
9:39:37 PM	#5 Text 0 File Burncd.cpp, Line 3153
	Turn on Disc-At-Once, using DVD media
	
9:39:38 PM	#6 Text 0 File DlgWaitCD.cpp, Line 260
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2013519 (447:26.69, 3932MB)
	
9:39:38 PM	#7 Text 0 File DlgWaitCD.cpp, Line 272
	Write in overburning mode: NO (enabled: CD)
	
9:39:38 PM	#8 Text 0 File DlgWaitCD.cpp, Line 2339
	Recorder: PIONEER DVD-RW  DVR-215D, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
9:39:38 PM	#9 Text 0 File DlgWaitCD.cpp, Line 438
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
9:39:38 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2013520 (2013520) = #2013520/447:26.70
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2013520 blocks [PIONEER  DVD-RW  DVR-215D]
	--------------------------------------------------------------
	
9:39:38 PM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [PIONEER  DVD-RW  DVR-215D] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4123688960, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2013520 | lead-out |   1 |    0x41 | 0x00
	
9:39:38 PM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
9:39:38 PM	#13 Text 0 File Burncd.cpp, Line 4037
	Cache writing successful.
	
9:39:38 PM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
9:39:38 PM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 12x (16,620 KB/s)
	
9:39:40 PM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
9:39:40 PM	#17 Text 0 File DVDR.cpp, Line 2258
	Recording mode: Sequential Recording Mode
	
9:39:41 PM	#18 Text 0 File Mmc.cpp, Line 21356
	Set BUFE: Buffer underrun protection -> ON 
	
9:39:41 PM	#19 Text 0 File DVDR.cpp, Line 2412
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
9:39:41 PM	#20 Text 0 File Cdrdrv.cpp, Line 8438
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 5
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
9:45:35 PM	#21 SCSI -1135 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04170000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 0x00 0x00 0x1D 0x03 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x20 0x01 0x42 0x0E 
	            0x00 0x00 0x00 0x00 0x0C 0x00 
	
9:45:35 PM	#22 CDR -1135 File Writer.cpp, Line 311
	Write error
	
9:45:35 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
9:45:35 PM	#24 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
9:45:35 PM	#25 Text 0 File DVDR.cpp, Line 2649
	EndDAO: Last written address was 1901503
	
9:45:35 PM	#26 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 12x (16,620 KB/s)
	

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 2/2/2007 3:00:00 AM 
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/29/2007 3:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 4/14/2008 12:10:32 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======


Of the same discs in the batch that have been successful that I used Nero CD-DVD Speed 4.7.7.16 to do Disc Quality tests using either the Samsung or Lite-On drive listed in the log above which all came out at 95%.

Thanks for any help!


#2

Bad media, so it seems.
Try at 8x.


#3

:bow::iagree:[B]Hey …

It is solved by disabling any virtual drive on your sustem…

Now it burns successfully

:flower::flower::flower::flower::flower:.!!![/B]


#4

[QUOTE=kautuk;2282785]:bow::iagree:[B]Hey …

It is solved by disabling any virtual drive on your sustem…

Now it burns successfully

:flower::flower::flower::flower::flower:.!!![/B][/QUOTE]

Who do you think is “you” and more interesting, who is “your system” ???

This thread is many months old.


#5

Hey…are you new on the internet???

It means any one who is having the problem for which this thread exists…and system means your [B]computer[/B] dude…


#6

[QUOTE=kautuk;2282832]Hey…are you new on the internet???

It means any one who is having the problem for which this thread exists…and system means your [B]computer[/B] dude…[/QUOTE]

Do you have an idea what thread this is about and what a forum is about?

Spamming is not a useful form of discussing things.

Your post is totally unrelated to the problem of the OP, BTW.


#7

[B]Hey…

I am not spamming … it has worked for me so i posted here to help other people…

So you tell me what this thread is abt if you know more …[/B]


#8

@ kautuk,

If you had bothered to view Forum Member’s Cyberdave initial #1 posting in this thread Nero-Burning Rom History File ‘Drivers’ you would have noted that Forum Member Cyberdave does not have any Virtual Drive Software Program(s) installed.

So your #3 posting in this particular instance is totally off the mark as valid pertinent information.

Perhaps the next time you attempt to High Jack Spam a Forum thread that you will educate yourself in how to correctly analyze the data posted in the Forum thread.

Also you need to check your KeyBoard – it appears your KeyBoard [B]‘Bold Key’ [/B]is malfunctioning

Regards,
bjkg


#9

@chef

Guys

Dont waste your time in messing with me…

Is your post “bad media” an engineered solution to the original problem posted here…???

My will atleast help someone else who will google on this forum…

You people seem to be real spammers…with lots of crap at the end of every post…

And dude my “bold key” is working fine… you might not knowledge abt text formatting in HTML…

So just cut crap now!!!