dvr-112L 8.06 TO 8.09? no go

vbimport

#1

i flashed my pioneer dvr-112d to a 112L i have ver 8.06 now from koba pack
but when i try to flash to 8.09 or 8.21 i get not correct firmware popup
what am i doing wrong, instructions says
2) Flash with provided patched Buffalo 8.06 flasher and firmware
3) Flash with provided original Buffalo 8.21 flasher and firmware
4) Happy burning with Buffalo 8.21 firmware.


#2

[QUOTE=fender62;2030811]i flashed my pioneer dvr-112d to a 112L i have ver 8.06 now from koba pack
but when i try to flash to 8.09 or 8.21 i get not correct firmware popup
what am i doing wrong, instructions says
2) Flash with provided patched Buffalo 8.06 flasher and firmware
3) Flash with provided original Buffalo 8.21 flasher and firmware
4) Happy burning with Buffalo 8.21 firmware.[/QUOTE]

load the flasher into MCSE and tick the allow same to same flashing box and save it as the original name, then run it and flash, also you may want to patch the firmware to RPC1,Read speed.


#3

thanks i got it to work, i now have 8.21, i have read u can put DVR-A12-J
firmware on the same drive, i downloaded the firmware used mcse on it but it pops up with error target drive wrong etc, should i just stick with 8.21
or is there better ?


#4

DVR-112L 8.25 is the latest firmware. 8.21 and 1.22/1.24 have some significant problems that 8.25 fixes.

Regards,
TerminalVeloCD


#5

al went smoothly i now have DVR-112L 8.25 is there a higher version out?


#6

[QUOTE=fender62;2035949]al went smoothly i now have DVR-112L 8.25 is there a higher version out?[/QUOTE]

that is the latest you have, 8.25


#7

[QUOTE=fender62;2035949]al went smoothly i now have DVR-112L 8.25 is there a higher version out?[/QUOTE]Do you have a Fender 62’?


#8

[I]Off topic.[/I] [QUOTE=Bob;2035958]Do you have a Fender 62’?[/QUOTE]I’ve a black Fender Stratocaster (MIJ) though. :bigsmile:
[I]Edit[/I], think you’ll have hard time to find a '62 Fender anywhere nowdays Bob.


#9

[QUOTE=pinto2;2035965][I]Off topic.[/I] I’ve a black Fender Stratocaster (MIJ) though. :bigsmile:
[I]Edit[/I], think you’ll have hard time to find a ‘62 Fender anywhere nowdays Bob.[/QUOTE]
hey now…you cutting in pinto2? :stuck_out_tongue: I’m actually looking for a 56’ but even harder to find but! i would never have the money for either. Just admire people that do have them.


#10

Completelly off topic.

“56” Bob. Must be the year you’r born old man. :bigsmile:

Think production of Fender guitars started early '54, so for sure that would be a vintage model hard to find. Athough you can have a look at '57 model. :smiley:


#11

[QUOTE=pinto2;2036004]Completelly off topic.

“56” Bob. Must be the year you’r born old man. :bigsmile:

Think production of Fender started early '54, so for sure that would be a vintage model hard to find. Athough you can have a look at '57 model. :D[/QUOTE]I’ve been here twice in Corona,CA > http://www.fendermuseum.com/

I went to opening day.

Yes born in 56’


#12

Ooops, with all this off topic posts, soon we’ll be banned Bob. :bigsmile:

But anyway, most of the time my old (hmm, '87) Fender is occupied by my son nowdays.
[I][I]Edit. Born '72, here.[/I][/I]


#13

[QUOTE=pinto2;2036014]Ooops, with all this off topic posts, soon we’ll be banned Bob. :bigsmile:

But anyway, most of the time my old (hmm, '87) Fender is occupied by my son nowdays.
[I][I]Edit. Born '72, here.[/I][/I][/QUOTE]:doh: yeah about the banned thang.

I have my Strat 91’ (lefty) and my 85’ Twin :smiley:


#14

Pling. :slight_smile:

8.25 is latest.


#15

[QUOTE=terminalvelocd;2031095]DVR-112L 8.25 is the latest firmware. 8.21 and 1.22/1.24 have some significant problems that 8.25 fixes.

Regards,
TerminalVeloCD[/QUOTE]

 & T,

 Will you please get detailed because I have 1.24 on all three of mine & I was going to go to the 8.25 but I thought it was same as 1.24. Could you please post some of the bugs/problems that 8.25 fixed.

                                                                        Thanks for your time,

                                                                                       Joe

#16

@ jcusimano2,

Just review the “Pioneer DVR-112D/L: Post your scans and questions here (1st look)” (http://club.cdfreaks.com/f87/pioneer-dvr-112d-l-post-your-scans-questions-here-1st-look-201109/) Disc Quality Scans with v8.25 FirmWare and compare against v1.24 FirmWare and note the improvements.

Regards,
bjkg