DVR-110D DVD Burning Problems

hey
i just bought a pioneer dvr-110d dvdrw drive and i installed it without any problems. i tested it out by burning a dvd game image (hp:gof - pc) which was 1.2gb, that burnt fine at 12x.
however, a few minutes later i tried making a dvd data disc about 3.8gb big.
it started up fine aswell, but then it got to 10% and froze. i left it going, but 45 minutes later it was still at 10%. i then updated the firmware and tried it. it still froze at 10%. i then disabled dma, but the problem remained. i then re-enabled dma and tried again but still the problem remains. i tried increasing and decreasing the speed, i tried 4x, 8x and 12x but it made no difference.

no error messages come up, what happens is that the burn progress stops at 10% but nero is still functional, it still counts down etc but the burning does not progress. the rest of my pc is also functional ,i can switch to other programs aswell. after say 25mins of it being on 10%, i press ctrl+alt+del to close nero, once nero is closed, the disc is still spinning and whirring, making the same noises it makes when its “burning” and it doesnt stop until i shut down or restart.

facts you may need to know:

  • im using benq 4.7gb dvd-r discs (8x)
  • the drive is on the secondary ide chanel and is set as master
  • my other disc drive is a lite on cd-rw drive (52x,24x,52x)
  • the lite on is also on the secondary ide chanel and is set as slave
  • im using windows xp pro - build 2600 - no sp’s
  • pc spec: duron 1.8ghz, 256 sdram pc133, 40gb hard drive, syntax SV266A Motherboard
  • the firmware of the drive is now v1.39
  • as no error messages come up, i cant get a log

so, does anyone know what the problem is and how to fix it? im really worried and annoyed as this is a present and i wont be able to get a refund.
i would be extremely greatful if you would be able to give me help and advice on how to solve my problem

thank you very much
User01

I’ve used the same media here without any problems, even with earlier 110 firmwares…
Is the burner connected to an 80 conductor IDE cable?

Only 256 mb RAM?? :eek:

You can find a log in the Nero folder…

Are you using Nero 7? if so, try uninstalling and use Nero 6 or something else.

Your computer might not be fast enough to support 12x or 16x burning. Try running a HDD performance tester, and post your transfer rate. There is a simple one in nero under options.

you should also get hold of SP2

  • would 256mb effect the burning?
  • its connected to an 80 conductor ide cable
  • whats the name of the log file? i cant seem to find it
  • does the master or slave factor effect the drive?

it still wouldnt burn even at 4x, but when i was trying 12x my pc still functioned normally, so i dont think my pc is too slow

btw, im using nero 6 ultra edition

^^^^^^^^ anyone?

The file is called NeroHistory.log in the Nero folder.

Update Nero to 6.6.1.4.

PS: Don’t post serials within logs.

heres the log

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.3.1.6
Adapter driver: <vax347s> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 104MB (106540kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.11.2005
CD Image
00:39:41 #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

00:39:41 #2 Text 0 File Reader.cpp, Line 118
Reader running

00:39:41 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

00:39:41 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media

00:39:41 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 312797 ( 69:32.47)

00:39:41 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

00:39:41 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

00:39:41 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:39:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 312798 (312798) = #312798/69:30.48
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 312796 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

00:39:41 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 640917504, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
312798 | lead-out | 1 | 0x00 | 0x41

00:39:41 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 312798 -> 312796.

00:39:41 #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

00:39:41 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

00:39:41 #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

00:39:41 #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

00:39:41 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

00:39:41 #17 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

00:41:48 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

00:41:55 #19 Text 0 File Mmc.cpp, Line 14708
<LITE-ON LTR-52246S > start Close Session

00:42:09 #20 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)
File ‘Drivers\vax347s.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.3.1.6
Adapter driver: <vax347s> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 119MB (122844kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.12.2005
CueSheet
18:38:34 #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

18:38:34 #2 Text 0 File Reader.cpp, Line 118
Reader running

18:38:34 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

18:38:34 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

18:38:36 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 348336 ( 77:26.36)

18:38:36 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

18:38:36 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:38:36 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:38:36 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 300 blocks [LITE-ON LTR-52246S ]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 347887 (347887) = #347887/77:18.37
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 347887 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

18:38:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1058400, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1058400 1411200 819641424, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
300 | 2 | 0 | 0x00 | 0x41
450 | 2 | 1 | 0x00 | 0x41
348337 | lead-out | 1 | 0x00 | 0x41

18:38:37 #11 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

18:38:37 #12 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

18:38:37 #13 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

18:38:37 #14 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

18:38:37 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:38:37 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

18:38:38 #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

18:38:38 #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

18:38:38 #19 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 06 00
41 02 01 21 00 00 08 00
41 aa 01 34 00 4d 1a 25

18:41:07 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 348337 (550B1h), lenght 0 blocks

18:41:11 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:41:11 #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

18:41:11 #23 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)
File ‘Drivers\vax347s.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
1A22-020K-0530-1349-1219-9976
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero API version: 6.3.1.6
Using interface version: 6.0.0.15
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\NeroVision
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 139MB (142996kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.12.2005
NeroAPI
20:43:24 #1 Phase 90 File APIProgress.cpp, Line 266
Buffer Underrun Protection activated

20:43:32 #2 Text 0 File Reader.cpp, Line 118
Reader running

20:43:32 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

20:43:33 #4 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

20:43:33 #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

20:43:34 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-At-Once, using CD-R/RW media

20:43:36 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 254613 ( 56:36.63)

20:43:36 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

20:43:36 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

20:43:36 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:43:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1298 (1298) = #1298/0:17.23
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1298 blocks [LITE-ON LTR-52246S ]
1: TRM_DATA_MODE2_2336 (NVEF)
2 indices, index0 (150) not provided
original disc pos #0 + 253166 (253166) = #253166/56:15.41
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 253166 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

20:43:37 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3405696, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3405696 3758496 599204928, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1298 | 2 | 0 | 0x00 | 0x41
1448 | 2 | 1 | 0x00 | 0x41
254614 | lead-out | 1 | 0x00 | 0x41

20:43:49 #13 Phase 24 File APIProgress.cpp, Line 266
Caching of files started

20:43:49 #14 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

20:43:49 #15 Phase 25 File APIProgress.cpp, Line 266
Caching of files completed

20:43:49 #16 Phase 36 File APIProgress.cpp, Line 266
Burn process started at 52x (7,800 KB/s)

20:43:49 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:43:49 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1448

20:43:50 #19 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

20:43:50 #20 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

20:43:50 #21 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 17
41 02 01 21 00 00 15 17
41 aa 01 34 00 38 24 40

20:46:02 #22 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 254614 (3E296h), lenght 0 blocks

20:46:08 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:46:08 #24 Phase 37 File APIProgress.cpp, Line 266
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[04.12.2005]------------------------------------
20:43:23 Robot error messages from:
====== *** NeroAPI, History File *** ======
1A22-020K-0530-1349-1219-9976
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero API version: 6.3.1.6
Using interface version: 6.0.0.15
Installed in: C:\Program Files\Ahead\Nero
Application: ahead\NeroVision
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : QUANTUM FIREBALLlct20 20 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 146MB (149840kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.12.2005
NeroAPI
21:34:22 #1 Phase 90 File APIProgress.cpp, Line 266
Buffer Underrun Protection activated

21:34:24 #2 Text 0 File Reader.cpp, Line 118
Reader running

21:34:24 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

21:34:25 #4 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

21:34:25 #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

21:34:25 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-At-Once, using CD-R/RW media

21:34:28 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 236792 ( 52:39.17)

21:34:28 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

21:34:28 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

21:34:28 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:34:28 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1297 (1297) = #1297/0:17.22
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1297 blocks [LITE-ON LTR-52246S ]
1: TRM_DATA_MODE2_2336 (NVE14)
2 indices, index0 (150) not provided
original disc pos #0 + 235346 (235346) = #235346/52:17.71
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 235346 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

21:34:28 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3403344, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3403344 3756144 557289936, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1297 | 2 | 0 | 0x00 | 0x41
1447 | 2 | 1 | 0x00 | 0x41
236793 | lead-out | 1 | 0x00 | 0x41

21:34:41 #13 Phase 24 File APIProgress.cpp, Line 266
Caching of files started

21:34:41 #14 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

21:34:41 #15 Phase 25 File APIProgress.cpp, Line 266
Caching of files completed

21:34:41 #16 Phase 36 File APIProgress.cpp, Line 266
Burn process started at 52x (7,800 KB/s)

21:34:41 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:34:41 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1447

21:34:41 #19 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

21:34:41 #20 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

21:34:42 #21 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 16
41 02 01 21 00 00 15 16
41 aa 01 34 00 34 27 12

21:36:52 #22 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 236793 (39CF9h), lenght 0 blocks

21:36:57 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

21:36:58 #24 Phase 37 File APIProgress.cpp, Line 266
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[04.12.2005]------------------------------------
21:34:20 Robot error messages from:
====== *** NeroAPI, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 41MB (42012kB)
Memory in use : 83 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.12.2005
CD Copy
01:54:45 #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

01:54:45 #2 Text 0 File Reader.cpp, Line 118
Reader running

01:54:45 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

01:54:45 #4 Phase 48 File dlgbrnst.cpp, Line 1841
Analyzing disc

01:54:46 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
The CD is copyrighted

01:54:46 #6 Text 0 File CDCopy.cpp, Line 2116
Index0 Index1 PostPause __LastBlockOfTrack
Track 1: 0 0 ( 0:02.00) 340099 340098 ( 75:36.48)

01:54:46 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: OFF write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 340099 = 340099, data (TRM_DATA_MODE2_FORM1_NOSUB, block size 2048)

01:54:46 #8 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

01:54:46 #9 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 340098 ( 75:36.48)

01:54:46 #10 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

01:54:46 #11 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

01:54:46 #12 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

01:54:46 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_FORM1_NOSUB (1 - Data (mode 2))
2 indices, index0 (150) not provided
original disc pos #0 + 340099 (340099) = #340099/75:34.49
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 340099 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

01:54:46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 800265648, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
340099 | lead-out | 1 | 0x00 | 0x41

01:54:46 #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

01:54:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

01:54:46 #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

01:54:46 #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

01:54:46 #19 Text 0 File Mmc.cpp, Line 15555
CueData, Len=32
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 aa 01 34 00 4b 24 31

01:59:59 #20 SCSI -1047 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06A4C000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x05 0x30 0x82 0x00 0x00 0x01 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x64 0x00

01:59:59 #21 Text 0 File TrackPFile.cpp, Line 257
Read error -1047 at address 340098, end of track -> ignore error

02:00:08 #22 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 340099 (53083h), lenght 0 blocks

02:00:16 #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

02:00:16 #24 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

02:00:16 #25 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 61MB (63300kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.12.2005
CD Image
16:19:58 #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

16:19:59 #2 Text 0 File Reader.cpp, Line 118
Reader running

16:19:59 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

16:19:59 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media

16:19:59 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 174560 ( 38:49.35)

16:19:59 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

16:19:59 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

16:19:59 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:19:59 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 174561 (174561) = #174561/38:47.36
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 174559 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

16:19:59 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 357808128, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
174561 | lead-out | 1 | 0x00 | 0x41

16:19:59 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 174561 -> 174559.

16:20:00 #12 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

16:20:00 #13 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

16:20:00 #14 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

16:20:00 #15 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

16:20:00 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0

16:20:00 #17 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

16:21:26 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:21:27 #19 Text 0 File Mmc.cpp, Line 14708
<LITE-ON LTR-52246S > start Close Session

16:21:38 #20 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6 (Nero Express)
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 39MB (40924kB)
Memory in use : 84 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.12.2005
Audio CD
18:37:53 #1 CDADOC -1 File Cdadoc.cpp, Line 1510
Audio item log info:
Audio document burn settings:
=============================
Burn mode: DAO,
CD Text: On,
Cache disk or network files: No,
Cache small files: No,
Cache files smaller than 65536 bytes.
Audio Multisession: No
List of audio tracks:
=====================
Track 01: Length: 02:38.36, Pause frames: 150, Filters: 0, Name: ‘01-hilary_duff_and_haylie_duff-our_lips_are_sealed-rtb.mp3’.
Track 02: Length: 10:50.74, Pause frames: 150, Filters: 0, Name: ‘03 asasathoma.wma’.
Track 03: Length: 05:14.18, Pause frames: 150, Filters: 0, Name: ‘heypangali.mp3’.
Track 04: Length: 03:39.32, Pause frames: 150, Filters: 0, Name: ‘Hilary Duff - Now You Know.mp3’.
Track 05: Length: 04:19.67, Pause frames: 150, Filters: 0, Name: ‘iruvarum.mp3’.
Track 06: Length: 06:07.54, Pause frames: 150, Filters: 0, Name: ‘Iyengaaru Veetu Azhage.mp3’.
Track 07: Length: 03:19.62, Pause frames: 150, Filters: 0, Name: ‘Jem - They.mp3’.
Track 08: Length: 05:48.59, Pause frames: 150, Filters: 0, Name: ‘Kaatha_Tamilmaalai_Com.mp3’.
Track 09: Length: 07:26.14, Pause frames: 150, Filters: 0, Name: ‘Matrix Theme (Instrumental).mp3’.
Track 10: Length: 04:05.45, Pause frames: 150, Filters: 0, Name: ‘KandaNaalMudhalai.mp3’.
Track 11: Length: 04:40.37, Pause frames: 150, Filters: 0, Name: ‘sollitharavaSolli.mp3’.
Track 12: Length: 04:28.12, Pause frames: 150, Filters: 0, Name: ‘TamilBeat.Com - Chinnachiru Kiliye.mp3’.
Track 13: Length: 04:25.34, Pause frames: 150, Filters: 0, Name: ‘thadaka.mp3’.
Track 14: Length: 05:36.69, Pause frames: 150, Filters: 0, Name: ‘Andakaka.mp3’.
Track 15: Length: 04:40.55, Pause frames: 150, Filters: 0, Name: ‘TAMILkonjum-kandukondien.mp3’.
Total size: 77:52.68

18:37:53 #2 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

18:37:53 #3 Text 0 File Reader.cpp, Line 118
Reader running

18:37:53 #4 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

18:37:53 #5 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

18:37:53 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

18:38:12 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 350317 ( 77:52.67)

18:38:12 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

18:38:12 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

18:38:12 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

18:38:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (01-hilary_duff_and_haylie_duff-our_lips_are_sealed-rtb.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 11886 (11886) = #11886/2:38.36
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11886 blocks [LITE-ON LTR-52246S ]
1: TRM_AUDIO_NOPRE (03 asasathoma.wma)
2 indices, index0 (150) not provided
original disc pos #0 + 48824 (48824) = #48824/10:50.74
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 48824 blocks [LITE-ON LTR-52246S ]
2: TRM_AUDIO_NOPRE (heypangali.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 23568 (23568) = #23568/5:14.18
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 23568 blocks [LITE-ON LTR-52246S ]
3: TRM_AUDIO_NOPRE (Hilary Duff - Now You Know.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 16457 (16457) = #16457/3:39.32
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16457 blocks [LITE-ON LTR-52246S ]
4: TRM_AUDIO_NOPRE (iruvarum.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 19492 (19492) = #19492/4:19.67
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19492 blocks [LITE-ON LTR-52246S ]
5: TRM_AUDIO_NOPRE (Iyengaaru Veetu Azhage.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 27579 (27579) = #27579/6:7.54
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 27579 blocks [LITE-ON LTR-52246S ]
6: TRM_AUDIO_NOPRE (Jem - They.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 14987 (14987) = #14987/3:19.62
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14987 blocks [LITE-ON LTR-52246S ]
7: TRM_AUDIO_NOPRE (Kaatha_Tamilmaalai_Com.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 26159 (26159) = #26159/5:48.59
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26159 blocks [LITE-ON LTR-52246S ]
8: TRM_AUDIO_NOPRE (Matrix Theme (Instrumental).mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 33464 (33464) = #33464/7:26.14
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 33464 blocks [LITE-ON LTR-52246S ]
9: TRM_AUDIO_NOPRE (KandaNaalMudhalai.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 18420 (18420) = #18420/4:5.45
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18420 blocks [LITE-ON LTR-52246S ]
10: TRM_AUDIO_NOPRE (sollitharavaSolli.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 21037 (21037) = #21037/4:40.37
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 21037 blocks [LITE-ON LTR-52246S ]
11: TRM_AUDIO_NOPRE (TamilBeat.Com - Chinnachiru Kiliye.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 20112 (20112) = #20112/4:28.12
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20112 blocks [LITE-ON LTR-52246S ]
12: TRM_AUDIO_NOPRE (thadaka.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 19909 (19909) = #19909/4:25.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19909 blocks [LITE-ON LTR-52246S ]
13: TRM_AUDIO_NOPRE (Andakaka.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 25269 (25269) = #25269/5:36.69
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 25269 blocks [LITE-ON LTR-52246S ]
14: TRM_AUDIO_NOPRE (TAMILkonjum-kandukondien.mp3)
2 indices, index0 (150) not provided
original disc pos #0 + 21055 (21055) = #21055/4:40.55
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 21055 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

18:38:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 15:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 28308672, ISRC “”
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 28308672 28661472 143495520, ISRC “”
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 143495520 143848320 199280256, ISRC “”
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 199280256 199633056 238339920, ISRC “”
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 238339920 238692720 284537904, ISRC “”
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 284537904 284890704 349756512, ISRC “”
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 349756512 350109312 385358736, ISRC “”
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 385358736 385711536 447237504, ISRC “”
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 447237504 447590304 526297632, ISRC “”
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 526297632 526650432 569974272, ISRC “”
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 569974272 570327072 619806096, ISRC “”
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 619806096 620158896 667462320, ISRC “”
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 667462320 667815120 714641088, ISRC “”
14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 714641088 714993888 774426576, ISRC “”
15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 774426576 774779376 824300736, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x01
-150 | 1 | 0 | 0x00 | 0x21
0 | 1 | 1 | 0x00 | 0x21
11886 | 2 | 0 | 0x00 | 0x21
12036 | 2 | 1 | 0x00 | 0x21
60860 | 3 | 0 | 0x00 | 0x21
61010 | 3 | 1 | 0x00 | 0x21
84578 | 4 | 0 | 0x00 | 0x21
84728 | 4 | 1 | 0x00 | 0x21
101185 | 5 | 0 | 0x00 | 0x21
101335 | 5 | 1 | 0x00 | 0x21
120827 | 6 | 0 | 0x00 | 0x21
120977 | 6 | 1 | 0x00 | 0x21
148556 | 7 | 0 | 0x00 | 0x21
148706 | 7 | 1 | 0x00 | 0x21
163693 | 8 | 0 | 0x00 | 0x21
163843 | 8 | 1 | 0x00 | 0x21
190002 | 9 | 0 | 0x00 | 0x21
190152 | 9 | 1 | 0x00 | 0x21
223616 | 10 | 0 | 0x00 | 0x21
223766 | 10 | 1 | 0x00 | 0x21
242186 | 11 | 0 | 0x00 | 0x21
242336 | 11 | 1 | 0x00 | 0x21
263373 | 12 | 0 | 0x00 | 0x21
263523 | 12 | 1 | 0x00 | 0x21
283635 | 13 | 0 | 0x00 | 0x21
283785 | 13 | 1 | 0x00 | 0x21
303694 | 14 | 0 | 0x00 | 0x21
303844 | 14 | 1 | 0x00 | 0x21
329113 | 15 | 0 | 0x00 | 0x21
329263 | 15 | 1 | 0x00 | 0x21
350318 | lead-out | 1 | 0x00 | 0x01

18:38:12 #13 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

18:38:12 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:38:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #12036

18:38:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #61010

18:38:12 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #84728

18:38:12 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #101335

18:38:12 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #120977

18:38:12 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #148706

18:38:12 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #163843

18:38:12 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #0): write at #190152

18:38:12 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #0): write at #223766

18:38:12 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #0): write at #242336

18:38:12 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #0): write at #263523

18:38:12 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #0): write at #283785

18:38:12 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #0): write at #303844

18:38:12 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #0): write at #329263

18:38:12 #29 Text 0 File Mmc.cpp, Line 15266
StartDAO : CD-Text - On

18:38:12 #30 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

18:38:12 #31 Text 0 File Mmc.cpp, Line 15555
CueData, Len=256
21 00 00 41 00 00 00 00
21 01 00 00 00 00 00 00
21 01 01 00 00 00 02 00
21 02 00 00 00 02 28 24
21 02 01 00 00 02 2a 24
21 03 00 00 00 0d 21 23
21 03 01 00 00 0d 23 23
21 04 00 00 00 12 31 35
21 04 01 00 00 12 33 35
21 05 00 00 00 16 1f 0a
21 05 01 00 00 16 21 0a
21 06 00 00 00 1a 35 02
21 06 01 00 00 1a 37 02
21 07 00 00 00 21 02 38
21 07 01 00 00 21 04 38
21 08 00 00 00 24 18 2b
21 08 01 00 00 24 1a 2b
21 09 00 00 00 2a 0f 1b
21 09 01 00 00 2a 11 1b
21 0a 00 00 00 31 2b 29
21 0a 01 00 00 31 2d 29
21 0b 00 00 00 35 33 0b
21 0b 01 00 00 35 35 0b
21 0c 00 00 00 3a 21 30
21 0c 01 00 00 3a 23 30
21 0d 00 00 00 3f 03 3c
21 0d 01 00 00 3f 05 3c
21 0e 00 00 00 43 1f 13
21 0e 01 00 00 43 21 13
21 0f 00 00 00 49 0a 0d
21 0f 01 00 00 49 0c 0d
01 aa 01 01 00 4d 34 44

18:43:22 #32 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 350318 (5586Eh), lenght 0 blocks

18:43:28 #33 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

18:43:28 #34 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

18:43:30 #35 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

18:43:30 #36 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 88MB (90212kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

4.1.2006
CD-ROM (ISO)
21:17:33 #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

21:17:33 #2 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

21:17:33 #3 Text 0 File Reader.cpp, Line 118
Reader running

21:17:33 #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

21:17:33 #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

21:17:33 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Track-at-once, using CD-R/RW media

21:17:33 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 29799 ( 6:39.24)

21:17:33 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

21:17:33 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

21:17:33 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:17:33 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 29800 (29800) = #29800/6:37.25
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 29798 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

21:17:33 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in TAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 61337600, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
29800 | lead-out | 1 | 0x00 | 0x41

21:17:33 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 29800 -> 29798.

21:17:33 #14 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

21:17:34 #15 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

21:17:34 #16 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

21:17:34 #17 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

21:17:34 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:17:34 #19 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

21:18:01 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

21:18:02 #21 Text 0 File Mmc.cpp, Line 14708
<LITE-ON LTR-52246S > start Close Session

21:18:14 #22 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 49MB (50352kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.1.2006
CueSheet
11:18:41 #1 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

11:18:42 #2 Text 0 File Reader.cpp, Line 118
Reader running

11:18:42 #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

11:18:42 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

11:18:43 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359303 ( 79:52.53)

11:18:43 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

11:18:43 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

11:18:43 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:18:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 300 blocks [LITE-ON LTR-52246S ]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 358854 (358854) = #358854/79:44.54
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 358854 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

11:18:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1058400, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1058400 1411200 845435808, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
300 | 2 | 0 | 0x00 | 0x41
450 | 2 | 1 | 0x00 | 0x41
359304 | lead-out | 1 | 0x00 | 0x41

11:18:43 #11 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

11:18:43 #12 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

11:18:43 #13 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

11:18:43 #14 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 52x (7,800 KB/s)

11:18:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:18:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450

11:18:43 #17 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

11:18:43 #18 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

11:18:43 #19 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 06 00
41 02 01 21 00 00 08 00
41 aa 01 34 00 4f 34 36

11:21:11 #20 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 359304 (57B88h), lenght 0 blocks

11:21:21 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

11:21:21 #22 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

11:21:21 #23 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 52x (7,800 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6 (Nero Express)
Recorder: <LITE-ON LTR-52246S> Version: 6S0D - HA 1 TA 1 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152L >Version: LS03 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-ROM SC-152L atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152L G: CDRom0
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 135MB (138572kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.1.2006
Video CD
19:52:06 #1 Text 0 File VCDDoc.cpp, Line 1453
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

19:52:06 #2 Phase 82 File dlgbrnst.cpp, Line 1841
Encoding video

19:52:06 #3 Text 0 File VCDCompilationImpl.cpp, Line 489
Using Nero Video Converter version 0.00

19:52:09 #4 Text 0 File AVIVCDFileItem.cpp, Line 879
Encoding C:\Program Files\BitComet\Downloads\lost.212.hdtv-lol.[VTV].avi to C:\DOCUME~1\HOMEUS~1\LOCALS~1\Temp\NER25.tmp
ScalingType: 0 Video: yes Audio: yes
File size: 366594048 bytes
Resolution: 624x352 23.976 Hz
Frames: 60716

19:52:09 #5 Text 0 File AVIVCDFileItem.cpp, Line 892
Playing time: 2532.360000 s
Requested rate: 225 KB/s
iVideoRate=0
iAudioRate=32
Estimated size: 189927 blocks

20:31:39 #6 Text 0 File AVIVCDFileItem.cpp, Line 921
Encoding done

20:32:35 #7 Text 0 File VCDFileItem.cpp, Line 355
Actual size: 189949 blocks

20:32:36 #8 Text 0 File VCDFileItem.cpp, Line 359
The generated Video file is 0.999958 of the evaluated size

20:32:43 #9 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:32:44 #10 Text 0 File VCDDoc.cpp, Line 2735
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

20:32:44 #11 Phase 90 File dlgbrnst.cpp, Line 1841
Buffer Underrun Protection activated

20:32:49 #12 Text 0 File Reader.cpp, Line 118
Reader running

20:32:49 #13 Text 0 File Writer.cpp, Line 124
Writer LITE-ON LTR-52246S running

20:32:50 #14 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

20:32:50 #15 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

20:32:50 #16 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

20:32:54 #17 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 191486 ( 42:35.11)

20:32:54 #18 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

20:32:54 #19 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON LTR-52246S;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

20:32:54 #20 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:32:54 #21 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1298 (1298) = #1298/0:17.23
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 1298 blocks [LITE-ON LTR-52246S ]
1: TRM_DATA_MODE2_2336 (lost.212.hdtv-lol.[VTV])
2 indices, index0 (150) not provided
original disc pos #0 + 190039 (190039) = #190039/42:13.64
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 190039 blocks [LITE-ON LTR-52246S ]
--------------------------------------------------------------

20:32:55 #22 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON LTR-52246S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 3405696, ISRC “”
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 3405696 3758496 450730224, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1298 | 2 | 0 | 0x00 | 0x41
1448 | 2 | 1 | 0x00 | 0x41
191487 | lead-out | 1 | 0x00 | 0x41

20:32:55 #23 Phase 73 File dlgbrnst.cpp, Line 1841
Preparing items

20:32:59 #24 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

20:32:59 #25 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

20:32:59 #26 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

20:32:59 #27 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 12x (1,800 KB/s)

20:33:00 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:33:00 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1448

20:33:00 #30 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

20:33:00 #31 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON , SMART-BURN : ON

20:33:00 #32 Text 0 File Mmc.cpp, Line 15555
CueData, Len=48
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 00 21 00 00 13 17
41 02 01 21 00 00 15 17
41 aa 01 34 00 2a 23 0c

20:37:05 #33 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON LTR-52246S > start writing Lead-Out at LBA 191487 (2EBFFh), lenght 0 blocks

20:37:15 #34 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:37:15 #35 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 12x (1,800 KB/s)

20:37:17 #36 Text 0 File AVIVCDFileItem.cpp, Line 985
Temporary file C:\DOCUME~1\HOMEUS~1\LOCALS~1\Temp\NER25.tmp deleted

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.17 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.3.1.6
Adapter driver: <vax347s> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-110D D: CDRom5
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 80MB (82764kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.2.2006
Burn DVD Image
04:04:24 #1 Text 0 File Reader.cpp, Line 118
Reader running

04:04:24 #2 Text 0 File Writer.cpp, Line 124
Writer PIONEER DVD-RW DVR-110D running

04:04:24 #3 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

04:04:24 #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 765465 (170:06.15, 1495MB)

04:04:24 #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

04:04:24 #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

04:04:24 #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

04:04:24 #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 765466 (765466) = #765466/170:6.16
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 765466 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

04:04:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1567674368, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
765466 | lead-out | 1 | 0x00 | 0x41

04:04:24 #10 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

04:04:25 #11 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

04:04:25 #12 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

04:04:25 #13 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 12x (16,560 KB/s)

04:04:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

04:04:25 #15 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 1:43,767 (103767ms) -> OK

04:04:25 #16 Text 0 File DVDR.cpp, Line 1619
Recording mode: Sequential Recording Mode

04:04:25 #17 Text 0 File Mmc.cpp, Line 19864
Set BUFE: supported -> ON

04:04:25 #18 Text 0 File DVDR.cpp, Line 1760
Start write address at LBA 0
DVD high compatibility mode: Yes

04:04:25 #19 Text 0 File Cdrdrv.cpp, Line 8002
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

04:04:26 #20 Text 0 File Cdrdrv.cpp, Line 1289
04:04:26.286 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:02 #21 Text 0 File Cdrdrv.cpp, Line 1289
04:05:02.839 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:02 #22 Text 0 File Cdrdrv.cpp, Line 1289
04:05:02.879 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:02 #23 Text 0 File Cdrdrv.cpp, Line 1289
04:05:02.919 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:02 #24 Text 0 File Cdrdrv.cpp, Line 1289
04:05:02.959 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:02 #25 Text 0 File Cdrdrv.cpp, Line 1289
04:05:02.999 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #26 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.039 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #27 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.079 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #28 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.109 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #29 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.400 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #30 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.580 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #31 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.620 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #32 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.670 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #33 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.710 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #34 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.750 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #35 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.790 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #36 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.830 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #37 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.870 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:03 #38 Text 0 File Cdrdrv.cpp, Line 1289
04:05:03.901 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #39 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.191 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #40 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.371 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #41 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.411 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #42 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.461 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #43 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.501 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #44 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.541 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #45 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.581 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #46 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.622 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #47 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.662 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #48 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.702 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #49 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.742 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #50 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.792 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #51 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.832 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #52 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.872 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #53 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.912 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #54 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.952 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:04 #55 Text 0 File Cdrdrv.cpp, Line 1289
04:05:04.992 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #56 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.032 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #57 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.092 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #58 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.132 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #59 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.172 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #60 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.212 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #61 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.252 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #62 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.293 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #63 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.333 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #64 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.373 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #65 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.423 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #66 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.463 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #67 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.503 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #68 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.543 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #69 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.583 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #70 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.623 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #71 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.663 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #72 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.723 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #73 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.763 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #74 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.803 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #75 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.843 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #76 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.883 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #77 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.923 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:05 #78 Text 0 File Cdrdrv.cpp, Line 1289
04:05:05.963 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #79 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.004 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #80 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.054 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #81 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.094 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #82 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.134 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #83 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.174 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #84 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.214 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #85 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.254 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #86 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.294 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #87 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.354 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #88 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.394 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #89 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.434 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #90 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.474 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #91 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.514 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #92 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.554 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #93 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.594 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #94 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.634 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #95 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.695 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #96 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.735 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #97 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.775 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #98 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.815 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #99 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.855 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #100 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.895 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #101 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.935 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:06 #102 Text 0 File Cdrdrv.cpp, Line 1289
04:05:06.995 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #103 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.035 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #104 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.075 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #105 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.115 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #106 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.155 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #107 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.195 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #108 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.235 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #109 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.295 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #110 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.335 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #111 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.376 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #112 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.416 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #113 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.456 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #114 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.496 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #115 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.536 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #116 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.576 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #117 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.636 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #118 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.676 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:05:07 #119 Text 0 File Cdrdrv.cpp, Line 1289
04:05:07.716 - PIONEER DVD-RW DVR-110D\H1 T0 : Queue again later

04:07:51 #120 Text 0 File WriterStatus.cpp, Line 115
<PIONEER DVD-RW DVR-110D> start writing Lead-Out at LBA 765466 (BAE1Ah), lenght 0 blocks

04:07:52 #121 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

04:07:52 #122 Text 0 File DVDR.cpp, Line 1970
EndDAO: Last written address was 765471

04:08:06 #123 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

04:08:06 #124 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

04:08:06 #125 Phase 37 File dlgbrnst.cpp, Line 1841
Burn process completed successfully at 12x (16,560 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)
File ‘Drivers\vax347s.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Home User
Home
1A23-0088-3030-1418-1156-6405

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 10:03:20
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.1.6
Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.17 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.3.1.6
Adapter driver: <vax347s> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-110D D: CDRom5
LITE-ON LTR-52246S F: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
Generic DVD-ROM I: CDRom3

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 65MB (67492kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.2.2006
ISO compilation
04:27:08 #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

04:27:09 #2 Text 0 File Reader.cpp, Line 118
Reader running

04:27:10 #3 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

04:27:10 #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using DVD media

04:27:10 #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1996719 (443:42.69, 3899MB)

04:27:10 #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

04:27:10 #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

04:27:10 #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

04:27:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1996720 (1996720) = #1996720/443:42.70
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1996720 blocks [PIONEER DVD-RW DVR-110D]
--------------------------------------------------------------

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 09:05:10
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 25/04/2005 09:03:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23/08/2001 12:00:00 (Adapter driver for rec)
File ‘Drivers\vax347s.sys’: Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

Please cut the crap out of this log listing…

Disable Multisession!
Update Nero to 6.6.1.4.

I does matter that the drive is jumpered correctly in relation to the IDE cable, the position does not matter.

Normally you should not multitask on a pc when burning, since you have only 256mb ram you should definitly not multitask (turn off your internet connection as well).

Does the drive show up as UDMA 4 in the device manager?

You can get all critical patches as well as SP2 from here:
http://www.techspot.com/tweaks/updates/

well disableing multi session and upgrading nero to 6.6.4.1 seemed to have worked, i managed to burn a full dvd data disc at 8x in 13mins.
it seems a bit long, but it took a while for my pc to prepare everything, the actual burning process wasnt that long. neways, i dont care, as long as it works!

hopefully it will keep it up! :stuck_out_tongue:

well anyways, thanks a lot for you help everyone, especially chef for your fantastic advice!!!

cheers
User01!

Please remove the serial from the log if possible. :wink:

Chef da man!

ouch at 13mins on x8 … that sounds like you have got a bundle of dodgy disks, with it being a bad disk it wouldnt allow itself to burn at a faster speed so it chose to burn at x4 instead of x8 by any chance is the sise of the data disk that took 13mins about 3,8gig or so and not a full disk, times for burning disks are avg (could be wrong)
x2 = 30 mins
x4 = 15 mins
x6 = 10mins 30secs
x8 = 7mins 30 secs
etc etc
thats all full 4.37gig disks

both those things that happend to you has happened to me and was caused by bad media