DVR-106D Problem w/Nero and Imgburn

I have some newly developed problems with a DVR-106D burner in a Sony Vaio PCV-RS430G. It’s running the 1.10 firmware from the Sony site and has worked well in the past. I get similar error messages “could not perform disk-at-once” with either Nero or Imgburn, at 2x or 4x. Can anybody make any suggestions based on the log below? Hopefully it’s something obvious I’m overlooking.

Thanks,

JG

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.10 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-121R>Version: 1.00 - HA 1 TA 1 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200BB-98DWA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3300831A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-121R atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
CdRomPeripheral : KW8946O ZKP900B 2.0B vaxscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D H: CdRom0
PIONEER DVD-ROM DVD-121R M: CdRom1
KW8946O ZKP900B N: CdRom2
MagicISO Virtual DVD-ROM O: CdRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096492kB)
Free physical memory: 1025MB (1050224kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.7.2007
Burn DVD Image
12:00:41 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:00:41 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

12:00:41 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1348272 (299:36.72, 2633MB)

12:00:41 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

12:00:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

12:00:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:00:41 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1348273 (1348273) = #1348273/299:36.73
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1348273 blocks [H: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------

12:00:41 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [H: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2761263104, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1348273 | 1348273 | 0x00
1348273 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:00:41 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

12:00:41 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

12:00:41 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

12:00:41 PM #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

12:00:41 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

12:00:41 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)

12:00:41 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:00:42 PM #16 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 …RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7…Ds…m…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

12:00:42 PM #17 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x066b7700: Len x648

12:00:42 PM #18 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

12:00:42 PM #19 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

12:00:43 PM #20 Text 0 File Cdrdrv.cpp, Line 1352
12:00:43.218 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:01:00 PM #21 Text 0 File Cdrdrv.cpp, Line 1352
12:01:00.687 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:01:03 PM #22 Text 0 File Cdrdrv.cpp, Line 1352
12:01:03.765 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:02:51 PM #23 Text 0 File Cdrdrv.cpp, Line 1352
12:02:51.218 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:03:18 PM #24 Text 0 File Cdrdrv.cpp, Line 1352
12:03:18.765 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:03:51 PM #25 Text 0 File Cdrdrv.cpp, Line 1352
12:03:51.156 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:03:58 PM #26 Text 0 File Cdrdrv.cpp, Line 1352
12:03:58.734 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:04:35 PM #27 Text 0 File Cdrdrv.cpp, Line 1352
12:04:35.734 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:04:35 PM #28 Text 0 File Cdrdrv.cpp, Line 1352
12:04:35.812 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:06:24 PM #29 Text 0 File Cdrdrv.cpp, Line 1352
12:06:24.234 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:07:40 PM #30 Text 0 File Cdrdrv.cpp, Line 1352
12:07:40.921 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:07:40 PM #31 Text 0 File Cdrdrv.cpp, Line 1352
12:07:40.968 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:07:48 PM #32 Text 0 File Cdrdrv.cpp, Line 1352
12:07:48.609 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:07:58 PM #33 Text 0 File Cdrdrv.cpp, Line 1352
12:07:58.140 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:08:03 PM #34 Text 0 File Cdrdrv.cpp, Line 1352
12:08:03.687 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:08:20 PM #35 Text 0 File Cdrdrv.cpp, Line 1352
12:08:20.062 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:08:26 PM #36 Text 0 File Cdrdrv.cpp, Line 1352
12:08:26.265 - H: PIONEER DVD-RW DVR-106D : Queue again later

12:09:04 PM #37 Text 0 File WriterStatus.cpp, Line 113
<H: PIONEER DVD-RW DVR-106D> start writing Lead-Out at LBA 1348273 (1492B1h), length 0 blocks

12:09:12 PM #38 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1348288

12:09:12 PM #39 CDR -1122 File ThreadedTransferInterface.cpp, Line 1893
Unable to recover TOC
H: PIONEER DVD-RW DVR-106D

12:09:12 PM #40 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1893
Could not perform end of Disc-at-once

12:09:12 PM #41 SPTI -1122 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x57
Sense Qual: 0x00
CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 57
Buffer x066bb900: Len x20

12:09:12 PM #42 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders

12:09:14 PM #43 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

12:09:14 PM #44 CDR -1122 File WriterStatus.cpp, Line 162
Unable to recover TOC
H: PIONEER DVD-RW DVR-106D

12:09:14 PM #45 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

12:09:14 PM #46 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)

12:09:14 PM #47 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:09:19 PM #48 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

12:09:19 PM #49 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Clean the drive, try other media and uninstall that virtual drives…