Dvds freezing

i’ve downloaded a movie and used winavi to convert it to dvd. i then used nero 6.3.0.3 to burn. i have watched the movie on the computer before burning and after burning, on the dvd and it was fine on the pc. i put the dvd into my dvd player and it freezes a few minutes into it. hee is the log from nero:

crystal

1A23-0046-1030-1597-1734-2929

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <LITE-ON DVDRW SOHW-812S> Version: US0Q - HA 1 TA 1 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.3.0.3
Adapter driver: <sojuscsi> HA 2

=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVVN07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-812S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-812S E: CDRom0
AXV CD/DVD-ROM F: CDRom1

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 43MB (44536kB)
Memory in use : 82 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2004
UDF/ISO compilation
12:19:36 PM #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

12:19:36 PM #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

12:19:36 PM #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

12:19:37 PM #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

12:19:37 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

12:19:37 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-812S running

12:19:37 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

12:19:37 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

12:19:37 PM #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

12:19:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 1145519 (254:33.44, 2237MB)

12:19:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

12:19:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON DVDRW SOHW-812S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

12:19:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:19:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1145520 (1145520) = #1145520/254:33.45
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1145520 blocks [LITE-ON DVDRW SOHW-812S ]
--------------------------------------------------------------

12:19:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW SOHW-812S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2346024960, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1145520 | lead-out | 1 | 0x00 | 0x41

12:19:37 PM #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

12:19:37 PM #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

12:19:37 PM #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

12:19:37 PM #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (5,520 KB/s)

12:19:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:19:37 PM #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 7:18,507 (438507ms) -> OK

12:19:37 PM #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

12:19:37 PM #23 Text 0 File Mmc.cpp, Line 19487
Set BUFE: supported -> ON , SMART-BURN : ON

12:19:37 PM #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

12:19:37 PM #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

12:20:04 PM #26 Text 0 File Cdrdrv.cpp, Line 1277
12:20:04.529 - LITE-ON DVDRW SOHW-812S\H1 T1 : Queue again later

12:27:34 PM #27 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-812S > start writing Lead-Out at LBA 1145520 (117AB0h), lenght 0 blocks

12:27:34 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:27:34 PM #29 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1145519

12:27:53 PM #30 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

12:27:53 PM #31 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

12:27:53 PM #32 Phase 37 File dlgbrnst.cpp, Line 1800
Burn process completed successfully at 4x (5,520 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.01a, size=20368 bytes, created 8/30/2004 11:34:14 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 8/17/2001 1:51:56 PM (Adapter driver for rec)
File ‘Drivers\sojuscsi.sys’: Ver=3.41.0.0 built by: WinDDK, size=5504 bytes, created 9/28/2003 10:57:52 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

i hope i have included everything

I don’t have an answer to your question, but you might want to edit your post and remove your Nero serial number. :slight_smile:

Lmao

i really could use some help. just about to give up

How long is the video? And what bitrate did you use for the encoding? If it’s too high, some DVD players might have problems with it.

You might also try burning at a slower speed.

Thanks for the Nero key LOL If this is legit I bet I can finally get support from Nero!

It’s Nero, from my experince not all DVD players like Nero burns…I reccomend you try burning with another application, I use Encore. I’ve burned the SAME DVDs with both and Nero just seems to be buggy about it, Encore burns it fine as long as it’s authored correctly.

@cryssaqt,

cool to see you sharing your key w the other net users, lol.

i thought that i might actually get some help from this site but as i can see…

If you’re not willing to work with us, we can’t troubleshoot your problem.

Did you read the questions that I asked? Did you try RLLMoFP’s suggestion?