I'm a newb to all this and started a trial with DVDFab 220.127.116.11. I'm not sure what kind of burner my Toshiba Satellite A300-D5310 laptop uses and i'm also using Window Vista if that helps. The media i've been using Verbatim media DVD+R DL, 8.5GB, 8X. The first couple of movies worked fine but the 3 got wasted on errors. I didn't think to copy the error at the time and post it here but usually these errors would occur right at the end of the writing process when it was about 99% finished.
I ran a defragment after this but still errors.
The log below is the most recent, which i used a TDK DVD+R DL, 8.5GB, 8x for. The difference with this error is that the error began at the start of writing process when it was about 5% in.
Is there anything else i can post to help identify the problem ?
What am i doing wrong ?
Help ? :rolleyes:
2009-02-19 23:25:27 Error INIT ERROR: Writing device initialization failed - sense: Code 03 73 04 [Write error, PMA update fail]
2009-02-19 23:25:27 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable.
2009-02-19 23:25:27 Error Init DVD+R Dual Layer: Failed to set layer change to LBA 1101104 (2.1 Gb.) - Code 03 73 04 [Write error, PMA update fail]
2009-02-19 23:25:07 Info Writing speed requested x4.0, effective x4.0
2009-02-19 23:25:07 Info layer break set by filesystem builder at 0
2009-02-19 23:25:07 Info Available write speed: 4x, 2.4x,
2009-02-19 23:25:07 Info Media ID: RITEK-S04-42
2009-02-19 23:25:07 Info Media type: Dual Layer DVD+R
2009-02-19 23:25:07 Info Not Applicable to this bus type
2009-02-19 23:25:04 Info Scanned files #16, folder #2 - total size 4508944384 b. (4.2 Gb.)
2009-02-19 23:25:04 Info Inserted media type : DL DVD+R
2009-02-19 23:25:04 Info Write started
2009-02-19 23:24:59 Info New media (DL DVD+R) inserted. Burning layer is ready to write
2009-02-19 22:35:38 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2009-02-19 22:35:38 Info Drive has Serial ATA physical interface
2009-02-19 22:35:38 Info New Drive selected : 1:0:0 - HL-DT-ST DVDRAM GSA-T40N JT03 D
2009-02-19 22:35:38 Info Current Drive selected : 1:0:0 - HL-DT-ST DVDRAM GSA-T40N JT03 D
2009-02-19 22:35:38 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2009-02-19 22:35:38 Info System default language : English (Australia)
2009-02-19 22:35:38 Info User default language : English (Australia)
2009-02-19 22:35:38 Info DLL Version : 18.104.22.1686
2009-02-19 22:35:38 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2009-02-19 22:35:38 Info Version : 5, 2, 3, 2
2009-02-19 22:35:38 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2009-02-19 22:35:38 Info OS : Microsoft Vista Professional (build 6001) with Service Pack 1 6.0
22:35:38: Analyzing of DVD started
22:36:13: Analyzing of DVD completed successfully
22:36:13: Copy process started
23:23:51: Copy process completed successfully
23:25:03: Burn DVD folder (C:\Users\HN\Documents\DVDFab\Temp\FullDisc\DIE_HARD_4_0_EXTENDED_EDITION) started
23:25:45: Task_2 failed! Error=112