DVD problem

vbimport

#1

Hi everybody

I am facing a problem using my DVD+RW RW8160 2.4x. I bought a new FUJIFILM DVD+R (Up to 8x), but after I open the DVDs box, I had an attention to a caution that say [Using this media with cartain 2.4x DVD+R/+RW drivers or recorders, or certain 4x DVD+R/+RW drivers or recorders may result in writing errors, failures in retrieval of data, or damage to the data recorded on this media. (detailed information inside)].
and when I looked inside the box, I found a spot of light and hope!!
it says [this media compliant with new standards for 8x speed DVD+R recorders, Using this media with cartain 2.4x DVD+R/+RW drivers or recorders, or certain 4x DVD+R/+RW drivers or recorders may result in writing errors, failures in retrieval of data, or damage to the data recorded on this media. To use this media with such drivers or recorders of their maximum writing speed of 2.4x or 4x, you must upgrade your firmware that supports the new 8x media]

Then, I upgrated my firmware. I used (M61_0108.RIC) with the flasher, but the DVDs did not work. I can successfully burn them, but I can not read them!!!. HOW COME? and what is the solution? did I used the right firmware?

I would appreciate any help… :smiley:


#2

seems that no answer!!


#3

You can’t read them on you dvd player or on your PC?


#4

Hi,

I’ve been having the same problem with my system as well. It’s Identical.

Since your problem was posted, have you resolved the issue yet?

If so could you please advise me on how to go about fixing it.

Cheers
Dan


#5

Please check the media code of Fuji with DVDIdentifier and let us know what software have you used to burn.


#6

Hey Alex,

Below is the info from DVD indentifier…

And attached is Nero info and other stuff…

** INFO : Drive = (null) DVD+RW RW8160 [FW 1.04]
** INFO : Write Capabilities = DVD+R DVD+RW
** INFO : Disc = [DVD+R:Plasmon1-C01-000]
** INFO : Reference Speed : 1x DVD = 1385 kBps
** INFO : An Writeable Disc Is Recommended For Accurate Results
** INFO : Write Speeds (Supported By This Drive On This Disc) Listed Below

** INFO : GET PERFORMANCE Write Speed Descriptor(s)
Descriptor #1 = 3245 kBps ( 2.40x) - [CLV/Non-Pure CAV]

** INFO : MODE SENSE Write Speed Descriptor(s) [Legacy Command]
** WARNING : MODE SENSE Is Obsolete And Not Always Properly Supported
Descriptor #1 = 2823 kBps ( 2.04x) - [CLV/Non-Pure CAV]

I hope this helps.

I would apricate all the help I can get on this one.

Cheers