DVD Decrypter I/O Error!



can anyone tell me what all this means? :confused:

DVD Decrypter Log
I 14:29:10 DVD Decrypter Version started!
I 14:29:10 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 17:29:10 Initialising SPTI…
I 17:29:10 Searching for SCSI / ATAPI devices…
I 17:29:10 Found 1 CD-RW and 1 DVD±RW!
I 17:29:16 Operation Started!
I 17:29:16 Source File: C:\JAMES792.ISO
I 17:29:16 Source File Sectors: 2,285,882 (MODE1/2048)
I 17:29:16 Source File Size: 4,681,486,336 bytes
I 17:29:16 Source File Implementation Identifier: DVD Shrink
I 17:29:16 Destination Device: [1:0:0] VOM-12E48X 1008 (D: ) (ATA)
I 17:29:16 Destination Media Type: DVD+R (Speeds: 2.4x, 4x, 6x, 8x, 12x)
I 17:29:16 Destination Media Sectors: 2,295,104
I 17:29:16 Write Mode: DVD
I 17:29:16 Write Type: SAO
I 17:29:16 Write Speed: MAX
I 17:29:16 Link Size: Auto
I 17:29:16 Test Mode: No
I 17:29:16 BURN-Proof: Enabled
I 17:29:16 Filling Buffer…
I 17:29:16 Writing LeadIn…
I 17:29:31 Writing Image…
I 17:39:08 Synchronising Cache…
I 17:39:13 Closing Track…
I 17:39:14 Finalising Disc…
I 17:39:31 Operation Successfully Completed! - Duration: 00:10:15
I 17:39:31 Average Write Rate: 7,937 KB/s (5.7x) - Maximum Write Rate: 10,913 KB/s (7.9x)
I 17:39:31 Cycling Tray before Verify…
W 17:39:41 Waiting for device to become ready…
I 17:39:56 Device ready!
I 17:39:57 Operation Started!
I 17:39:57 Source Device: [1:0:0] VOM-12E48X 1008 (D: ) (ATA)
I 17:39:57 Source Media Type: DVD+R (Speeds: 2.4x, 4x, 6x, 8x, 12x)
I 17:39:57 Verifying Sectors…
E 17:53:36 Failed to read Sector 1369760 - L-EC Uncorrectable Error
E 17:53:36 Failed to Verify Sectors!
E 17:53:36 Operation Failed! - Duration: 00:13:39
I 17:53:36 Average Verify Rate: 3,349 KB/s (2.4x) - Maximum Verify Rate: 9,181 KB/s (6.6x)


~ James


what brand media are you using?

you could try burning at a lower speed & also burning not more than 4GB to the disc, because dvd`s read/burn from the middle out you tend to get more errors towards the edge of the disc.


thanks for the quick reply :slight_smile:

I have been using memorex discs.

I have tried burning a smaller image also and had the same results :frowning:

~ James


MMmmm are they CMC :Z or MBI?

if they are CMC i would get some better media as memorex cmc`s are not good quality, they seem to have moved over to MBI which seem quite good.


how do I tell?

I have been using mirror discs also with the same results

could you suggest a place to buy good media in the UK?



i bet you woun`t make that mistake again, most of them are infosmart rubbish with a fake tayio yuden leadin info.

finding somewere that dosent sell some crap or some fake ty is getting very hard to do, you could give [aprmedia]( http://www.aprmedia.co.uk/) a try. the fujis or maxells are good. avoid the danton and cheep riteks.


i get decrypter error messages sometimes too.
in my case it has nothing to do with the kind of media i use, i can get it when using TY’s or verbatim. it may be a conflict with other burning softwares…i am not sure just speculating…

any way i just hit cancel and the burn continues on without a problem.

also most times decrypter will open up another user interface - i just cancel the one that is not doing the burning.

since it is freeware and otherwise works fine i
am not too worked up about it… :wink:


james error was when dvddecrypter was verifying not burning.


I have tried ridata media also with the same results :frowning:

could this be a problem with my burner?


pardon me for not being specific - i get that error also right before the burning starts so would that count as the verification process?
it happens after shrink does it’s thing and decrypter starts doing it’s thing.


no the verification is an option in dvddecrypter and is done after burning simular to that of nero.

i don`t know the technical term for your problem, it has happend to me very occasionaly. you could try at the dvddecrypter forum.


OK thanks.
i don’t even consider it a “problem”…
decrypter is great!