DVD Burning Problems with 1 click and nero HELLLPP!

I have been burning dvds for quite a while with both nero and 1 click. Over 40+. All of a sudden getting “Illegal request, cannot write medium” with 1 click. Nero will transcode but wont burn. This is all of a sudden so i dont know what is going on. using the same discs always have (tdk) and same burning speed! Firmware is up to date. Help!

[QUOTE=mikeb1222;2075781]I have been burning dvds for quite a while with both nero and 1 click. Over 40+. All of a sudden getting “Illegal request, cannot write medium” with 1 click. Nero will transcode but wont burn. This is all of a sudden so i dont know what is going on. using the same discs always have (tdk) and same burning speed! Firmware is up to date. Help![/QUOTE]

[I][B]Please Post a >> F8 log session of the attempt(s) …
Let us read the ‘process’ and ‘error’ in context

  • and your options - selected

Open 1Click >> F8 >> Copy and Paste in Reply
Look for :
Session Started” / “Session Closed

  • to divide the individual sessions

Post one “Complete” Session per Reply Post
One or Two “Session(s)” in question should suffice

If the One Session is too long - Divide the Session into Two Postings

Your log will instantly answer 20 questions we might have

Let us take a look …[/B][/I]

:slight_smile:





Here's the Usual .....troubleshoots ...

Let's check something .....

Go to > Start > My Computer 
> Right Click on DVD drive > Properties > Auto-Play tab 

What do you have selected for the "Action to Perform" for [B]'DVD Movie[/B]" ?
This should be set as "[B]Take no action[/B]"
OR 
Set only for your DVD Player ( WinDVD/Power DVD ) 
- [B]be sure to close your 'Player' before opening 1Click [/B]

What do you have selected for the "Action to Perform" for [B]'Blank CD"[/B] ?
This should be set as "[B]Take no action[/B]"



While here in the DVD Drive  'Properties" 
Do you have a "DLA" tab ?
= [B]Disable[/B] DLA 

___________________


Would  you happen to have
 - Nero ( [B]InCD[/B] ) 
or
 Roxio ( [B]DragtoDisc[/B]/ EasyArchive/ DirectCD  ) 
- installed/active on your Computer ?


[B]FAQ[/B] : [Can other software conflict with the installation 
and operation of 1Click DVD Copy?](http://www.lgsoftwareinnovations.com/faq.asp#conflicts)


~~~~~~~~~~~~~~~~~



[B]  Let's look at your Filters [/B]
> Download IMGBurn. It's a free program: 
http://www.imgburn.com/index.php?act=download
(it's also an excellent burning program )

>  Run IMGBurn >  Go to Tools > Filter Driver Load Order

>  Click "Clipboard". Close IMGBurn 
 Then paste the information you copied into your clipboard 
into your next post in this thread (ctrl-v).

Visit  http://www.cdr-zone.com/forum/about4719.html, 
and read the first post please,
 so you can get a better understanding of what is going on.

[B]Please , Do not start randomly deleting filters.[/B]




``````````````````````````````````````````````````


Here's some Help - with maybe ... reducing the load .... 

I'd recommend that you [Try using EnditALL while Copying/Burning](http://forum.lgsoftwareinnovations.com/showthread.php?t=15256)
... to free up your resources 
... You might be surprised at what's running - in the background 


Open [Advanced Windows Care Personal](http://www.iobit.com/AdvancedWindowsCarePersonal/index.html)> Tools > Start-Up Manager 
( it's completely free and a very recommended clean-up program ) 

You will be presented with a listing of the Programs 
 - Programs that  are designated to Start-Up with Windows 
- and Descriptions of Each ( Click on Selection ) 

Any  Start Up Entry - Referring to any DVD/CD Software ? 
Windows Media Player ? 
ITunes ? 

If So = UN Check  it 

This only Disables  the Program - from the List 
- Designated to 'Start-Up' - with Windows 
You would - still - be able to 'manually' start the Program(s) - when needed 

Also ...... 
UN Check  anything - Not Trustworthy 
UN Check  anything - Not Necessary or Not Preferred 
( you may  click on an Start-Up item > Select Disable - If you prefer ) 
>> Apply 
> Reboot 


or  -
You could  also , Go into Msconfig - and Deselect unneeded Programs 
- from your 'Start Up"
This will help a lot .....
[Do I really need this on my PC?](http://forum.lgsoftwareinnovations.com/showthread.php?t=14325)

[How to use MSCONFIG ?](http://www.netsquirrel.com/msconfig/)




:)

Alright lets try one thing at a time here. I have a log of the error and I also have a log of a dvd that was successfully burned a day prior to when all of this shit started. I will post the bad log and let me know if you would like to look at the good one.

6/8/2008 10:38:59 AM info ******************** Report session closed *********************
6/8/2008 10:38:57 AM info Writer: Media removed. Burning layer not ready to write
6/8/2008 10:35:14 AM error Burn process failed.
6/8/2008 10:35:08 AM error Writer: Write error at 0 (16) - Code 05 30 05 [Illegal request, Cannot write medium, Incompatible format]
6/8/2008 10:33:51 AM info Writer: Write started 989568 sectors to write
6/8/2008 10:33:51 AM info Writer: Writing speed requested x2.4, effective x1.5
6/8/2008 10:33:51 AM info Writer: Available write speed: 2.4x, 2x
6/8/2008 10:33:51 AM info Writer: Media ID: DAXON-AZ3-00
6/8/2008 10:33:51 AM info Writer: Media type: DVD+R
6/8/2008 10:33:51 AM info Writer: Ultra DMA mode 2 (ATA33)
6/8/2008 10:33:51 AM info Available Virtual Memory : 1831 MB.
6/8/2008 10:33:51 AM info Total Virtual Memory : 2047 MB.
6/8/2008 10:33:51 AM info Memory Load : 58%
6/8/2008 10:33:51 AM info Available Physical Memory : 209 MB.
6/8/2008 10:33:50 AM info Total Physical Memory : 511 MB.
6/8/2008 10:33:50 AM info Writer: Scanned files #7, folder #2 - total size 2025543680 b. (1.89 Gb.)
6/8/2008 10:33:50 AM info Writer: Inserted media type : DVD+R
6/8/2008 10:33:50 AM info Writer: Write started
6/8/2008 10:33:49 AM info Volume name Shooter
6/8/2008 10:33:49 AM info Source path for burning "C:\Documents and Settings\Owner\Desktop\Shooter\DVD_01_1\VIDEO_TS"
6/8/2008 10:33:41 AM info Writer: New media inserted. Burning layer is ready to write
6/8/2008 10:33:09 AM info Writer: Compatible media types : DVD+R, DVD+RW, CD-R, CD-RW
6/8/2008 10:33:09 AM info Writer: New Drive selected : 1:0:0 - HP DVD Writer 200j 1.72 [E] (Ide)
6/8/2008 10:33:04 AM info Writer: Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
6/8/2008 10:33:04 AM info IFO reallocation not required
6/8/2008 10:33:04 AM info Working Folder has “38131 Mb.” of free space
6/8/2008 10:33:04 AM info Working Folder : C:\Documents and Settings\Owner\Local Settings\Application Data\1Click DVD Copy Pro
6/8/2008 10:33:04 AM info Destination : [E] HP DVD Writer 200j 1.72 (Ide)
6/8/2008 10:33:04 AM info Source size : 1.8863 GB
6/8/2008 10:33:04 AM info Source : C:\Documents and Settings\Owner\Desktop\Shooter\DVD_01_1\VIDEO_TS
6/8/2008 10:33:04 AM info Preset: Exact Copy - Everything, no compression (Double Layer if original > 4.7 GB)
6/8/2008 10:33:04 AM info Disable Interactive Media Player: TRUE
6/8/2008 10:33:04 AM info Dual Layer Media: FALSE
6/8/2008 10:33:04 AM info Movie Only Menus: FALSE
6/8/2008 10:33:04 AM info Keep Subtitles: FALSE
6/8/2008 10:33:04 AM info Prefer DTS Audio: TRUE
6/8/2008 10:33:04 AM info Enable media stats collection - VSO: TRUE
6/8/2008 10:33:04 AM info Turn off computer after burn: FALSE
6/8/2008 10:33:04 AM info Delete temporary files: TRUE
6/8/2008 10:33:04 AM info Warn before erasing RW media: TRUE
6/8/2008 10:33:04 AM info Allow DVD tray eject: TRUE
6/8/2008 10:33:04 AM info Prompt for another copy of the same source: FALSE
6/8/2008 10:33:04 AM info Preferred Burn Speed: Max
6/8/2008 10:33:04 AM info DVD-R Write Mode: Default - Let burn engine decide
6/8/2008 10:33:04 AM info Save Menu Preset: FALSE
6/8/2008 10:33:04 AM info Show Hint popups: TRUE
6/8/2008 10:33:04 AM info START button clicked
6/8/2008 10:33:04 AM info Read access layer: Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
6/8/2008 10:32:58 AM info Volume name: DVD_01_1
6/8/2008 10:32:58 AM info Scanning Source files…
6/8/2008 10:32:55 AM info Destination: [E] HP DVD Writer 200j 1.72 (Ide) - Ultra DMA mode 2 (ATA33)
6/8/2008 10:32:55 AM info Source: C:\Documents and Settings\Owner\Desktop\Shooter\DVD_01_1\VIDEO_TS
6/8/2008 10:32:55 AM info DVD2DVD: 5.6.2.6 VSO_HWE: 2.1.3.324 BOUDUCON: 2.0.0.145
6/8/2008 10:32:55 AM info [F] MITSUMI CD-ROM FX48++W W01H (Ide)
6/8/2008 10:32:55 AM info [E] HP DVD Writer 200j 1.72 (Ide)
6/8/2008 10:32:55 AM info Loading reader listbox
6/8/2008 10:32:55 AM info [E] HP DVD Writer 200j 1.72 (Ide)
6/8/2008 10:32:55 AM info Loading writer listbox
6/8/2008 10:32:53 AM info Update Notification enabled : TRUE
6/8/2008 10:32:53 AM info AutoPlay setting: Enabled
6/8/2008 10:32:52 AM info User default language : 1033 (0x0409h) - English (United States)
6/8/2008 10:32:52 AM info System default language : 1033 (0x0409h) - English (United States)
6/8/2008 10:32:52 AM info Version 3.1.2.3
6/8/2008 10:32:52 AM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy Pro\1ClickDvdCopyPro.exe"
6/8/2008 10:32:52 AM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
6/8/2008 10:32:50 AM info ******************** Report session started ********************

…Yes I do happen to have nero installed on my computer. I use it quite often but it takes so long to transcode.

When this started happening it would transcode but not burn and ended up with like six coasters.

Im going to download the programs you have listed to see if that helps any.

Thanks for all your help so far!

I have downloaded all 3 programs that you recommended. I have done something similar to cleaning up all the junk before but wasnt as easy as the WindowsCare program was.

I did notice that I have a few nero things starting up with the computer and I quickly disabled them. I did the full cleanup with WindowsCare. I downloaded EndItAll but I didnt use anything because what I read seemed that I only needed to use it while I was burning a DVD.

I also downloaded ImgBurn. You asked me to post a copy of the clipboard so here it is:

===============================================
Filter Driver Load Order - ImgBurn v2.4.1.0

Upper Device Filter: redbook
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: Pfc
Lower Class Filter: MxlW2k
Lower Class Filter: PxHelp20
Lower Class Filter: drvmcdb
Lower Class Filter: ElbyDelay
Lower Device Filter: imapi

    Filter Name:  redbook
      File Name:  C:\WINDOWS\System32\DRIVERS\redbook.sys
   File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

    Filter Name:  Pfc
      File Name:  C:\WINDOWS\system32\drivers\pfc.sys
   File Version:  2, 5, 0, 201 [2.5.0.201]

File Description: Padus® ASPI Shell
Product Name: Padus® ASPI Shell
Product Version: 2, 5, 0, 201 [2.5.0.201]
Company Name: Padus, Inc.
Copyright: © Padus, Inc. 1999-2001. All rights reserved.

    Filter Name:  MxlW2k
      File Name:  C:\WINDOWS\system32\Drivers\MxlW2k.sys
   File Version:  1.0.1.104

File Description: MusicMatch Access Layer KMD
Product Name: MusicMatch Access Layer
Product Version: 1.0.1.104
Company Name: MusicMatch, Inc.
Copyright: Copyright © 2000 MusicMatch, Inc.

    Filter Name:  PxHelp20
      File Name:  C:\WINDOWS\System32\DRIVERS\PxHelp20.sys
   File Version:  2.02.40a [2.2.40.0]

File Description: PxHelper Device Driver for Windows 2000
Product Name: PxHelp20
Product Version: [2.0.0.0]
Company Name: VERITAS Software, Inc.
Copyright: Copyright © VERITAS Software, Inc. All Rights Reserved

    Filter Name:  drvmcdb
      File Name:  C:\WINDOWS\System32\DRIVERS\drvmcdb.sys
   File Version:  3.21.45a [3.21.45.0]

File Description: Device Driver
Product Name:
Product Version: [1.0.0.1]
Company Name: VERITAS Software, Inc.
Copyright: Copyright © VERITAS Software, Inc.

    Filter Name:  ElbyDelay
      File Name:  C:\WINDOWS\System32\Drivers\ElbyDelay.sys
   File Version:  5, 1, 0, 1 [5.1.0.1]

File Description: Elby Delay Lower Filter Driver
Product Name: CDRTools
Product Version: 5, 1, 0, 1 [5.1.0.1]
Company Name: Elaborate Bytes AG
Copyright: Copyright © 2003 - 2006 Elaborate Bytes AG

    Filter Name:  imapi
      File Name:  C:\WINDOWS\System32\DRIVERS\imapi.sys
   File Version:  5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: IMAPI Kernel Driver
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180
Company Name: Microsoft Corporation
Copyright: © Microsoft Corporation. All rights reserved.

I read the post you listed about the filters and it seems like some very useful information to someone who would know what two programs filters collide. (if my understanding of it is correct).

I do not have any Roxio stuff on my computer I dont think. Unless it came with the computer software because I reformatted about six months ago and I am very aware of what I put on and take off!

Hopefully all of this information has helped you to help me! Thanks for the links to much useful software. Hopefully we/you can find a solution soon! :frowning:

[QUOTE=mikeb1222;2076085]Alright lets try one thing at a time here. I have a log of the error and I also have a log of a dvd that was successfully burned a day prior to when all of this shit started. I will post the bad log and let me know if you would like to look at the good one.

…Yes I do happen to have nero installed on my computer. I use it quite often but it takes so long to transcode.

When this started happening it would transcode but not burn and ended up with like six coasters.

I’m going to download the programs you have listed to see if that helps any.

Thanks for all your help so far![/QUOTE]

You need to Update 1Click PRO
Current Version is 3.1.8.3
http://www.lgsoftwareinnovations.com/download.asp

You have CloneDVD2 installed
So …
Where is AnyDVD ?

-or- … What are you using for a Decrypter ?



Big Problem :
[B]Filter Name: [COLOR="navy"]drvmcdb
File Name: C:\WINDOWS\System32\DRIVERS\drvmcdb.sys
File Version: 3.21.45a [3.21.45.0]
File Description: Device Driver
Product Name: 
Product Version: [1.0.0.1]
Company Name: VERITAS Software, Inc.
Copyright: Copyright © VERITAS Software, Inc.[/B][/COLOR]


[[B]drvmcdb.sys file information[/B]](http://www.file.net/process/drvmcdb.sys.html)

You need to Remove  DLA/ DragtoDisc 


~~~~~~~~~~~~


... but ..

Your Biggest Problem :

[[B]HP DVD Writer 200j [/B]](http://www.videohelp.com/dvdwriters/hp-dvd200i/22)

This Burner is antique :eek:
[B]12x[COLOR="Blue"]CDR CLV
10xCDRW CLV
DVD-R None 
DVD-RW None 
DVD-RDL None 
2.4xDVD+R CLV
2.4xDVD+RW CLV
DVD+RDL None 
DVD-RAM None [/B][/COLOR]


You  -really- need to consider replacing this Old DVD-RW   Drive
In fact - It's Imperative 
Yours has truly served it's time 
[B]Last Firmware Update :  [COLOR="DarkRed"]2004-03-25   [/COLOR][/B]
re: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dv-18855-1&lc=en&cc=us&dlc=en&product=81681&os=228&lang=en

You should have it 'bronzed' 


New 20x/22x DVD Burners are only $30.00+/-

[LG // LG H55 / GH22NP20](http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2000100005+50001623+1036506653)
[Samsung 202](http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2000100005+50001077+1036506653)
[Pioneer 115](http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2000100005+50001167+1036506653+1036906731&name=2MB)


;)  $30.00 +/-

Ultimately , 
I would also  replace your CD-ROM Drive with a new  DVD Burner 



[B]Media ID: DAXON-AZ3-00[/B]

Your Burner has No Firmware Support - whatsoever

  • for this 16x Media - or most/ All 16x Media

[I][B][U]Definitely[/U][/B][/I] : Try some Better Media
Verbatim or TY Media
You’ll be much Happier … :wink:

BestBuy has Verbatim on Sale - quite a bit

  • for probably about the same ( or less )
    than you were paying for those DAXON-AZ3-00

Verbatim @ BestBuy
Verbatim @ Newegg
Verbatim @ Walmart

Taiyo Yuden :
http://www.rima.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=R&Category_Code=TAIYOYUDEN
http://www.supermediastore.com/taiyo-yuden-dvd-r-media.html
http://www.meritline.com/search.html?ipKeyword=yuden&ipMinPrice=&ipMaxPrice=&N=1&imageField.x=27&imageField.y=7

:slight_smile:

I have sonic mydvd and cant find DLA. I read about that filter and dont want to delete it right away because i dont want the blue screen of death everyone is talking about. i was considering buyin a new dvd drive but wasnt sure if that would fix the problem. How do I delete that file without running into any unwanted problems. I tried to go to add/remove programs but you cant change, only uninstall. Thanks!

[QUOTE=mikeb1222;2076480]I have sonic mydvd and cant find DLA. I read about that filter and don’t want to delete it right away because i don’t want the blue screen of death everyone is talking about. i was considering buying a new DVD drive but wasn’t sure if that would fix the problem. How do I delete that file without running into any unwanted problems. I tried to go to add/remove programs but you cant change, only uninstall. Thanks![/QUOTE]

There is a Driver File in your System32 Folder

  • sharing the drvmcdb - name (similar)
    If you removed this Driver File - Then Windows would not boot

However

  • We the referencing drvmcdb Filter in your CD-ROM Drivers
    It’s more likely that the presence of this Filter - if active
  • would cause the BSOD

>> Create a backup of your registry
> Open IMGBurn
> Go to Tools > Filter Driver Load Order
>> Select “DRVMCDB”
> Click “Remove Selected Filter”
>> Click “Remove Selected Filter”
> Click "OK ".
>> Reboot

Keep in mind the programs that installed those filters
will no longer work properly.
Certain Functions of SonicMyDVD may not be available


A new DVD Burner would help immensely

  • that may be 95% of the problem - if not all
    Your burner is old enough - that it may just have given up the ghost

Your HP 200j had a Max Burn of 2.4x :sad:
That must be like watching grass grow
…Let me put it this way :
A 8x Burn takes 8 min +/-
A 12x Burn takes 6
A 16x burn takes 5
A 22x burn takes 4 min

Really , Do yourself a favor and get a new burner
You can’t even fill your gas tank for $30.00 :wink:

:slight_smile:

Shannon I noticed something you may of overlooked? In the log it shows 58% Memory Load? That is quite high to don’t you think? Grant it that there is 2 gigs of RAM but…

Music match effects other burning software but not sure if it effects one click or not???

[QUOTE=Dr. Who;2076634]

Shannon I noticed something you may of overlooked?
In the log it shows 58% Memory Load?
That is quite high to don’t you think?

Grant it that there is 2 gigs of RAM but…[/QUOTE]

Yes , you’re right …

I did try to address this :

re:

:slight_smile:

[QUOTE=Dr. Who;2076635]Music match effects other burning software but not sure if it effects one click or not???[/QUOTE]

It’s best - to at least -
just to Disable this from Windows Start-Up
So that it’s not Running in the background

I saw this Filter

  • but I felt it more important to address the more probable Issues - First

The OP definitely needs a New Burner
I’d say … that would be 'Priority One"

:cool:

Alright. I tried to delete the filter and then burn. Same error. I went ahead and ordered a 22x Lg Lightscribe off of the link you provided for like 28 bucks. Not bad. Thank you! Hopefully that will solve all of the issues. As soon as I get it, it will be in and I will let you know what happens! Thanks for all of your help so far!

Alright,
Got the burner and everything is in. Before I had a dvd burner and a cd rom drive. I removed the cd rom and took the older burner in its spot. Then I put the new one in on top. Ran the new one as the master and old one as the slave. Got an error again. Googled the error and found a quick fix by unplugging the slave (old dvd burner) and everything works perfectly. So all is good. It is near pointless to have another drive anyways because you cant do two things at once on this computer. :sad:Thanks for the link to that site in finding me a new drive for cheap. You’re awesome!

[QUOTE=mikeb1222;2079799]Alright,
Got the burner and everything is in. Before I had a dvd burner and a cd rom drive. I removed the cd rom and took the older burner in its spot. Then I put the new one in on top. Ran the new one as the master and old one as the slave. Got an error again. Googled the error and found a quick fix by unplugging the slave (old dvd burner) and everything works perfectly. So all is good. It is near pointless to have another drive anyways because you cant do two things at once on this computer. :sad:Thanks for the link to that site in finding me a new drive for cheap. You’re awesome![/QUOTE]

I’m glad to hear that worked for you !
Excellent !
:cool:

If you’d like , Please post the now successful logs for some 'follow-up"

Using one drive is fine
The only point in having Two Drives

  • Is one of convenience
    Using one Drive to read - One to Burn
  • means you can Place both the original and the Blank
  • and not have to swap Discs midstream

In the Future , If you’d like to add another Drive
I’d suggest getting a Samsung SH-202 to use as the Reader
( Samsungs are Faster readers than the LGs )

Your Issue with Both drives being connected

  • May have been simply that the HP 200 Drive was Bad

You might also need a New 80 wire IDE Cable
( if you didn’t replace the Old one )
The IDE cable may also be bad
IDE Cables are cheap ($10.00+/- … or less )

Were the Original Drives - Originally - set as Master / Slave ?

  • or - As Cable Select ?

Your New LG GH22 is UDMA 4
Your Old HP 200 was UDMA 2
This also might present some Issues

  • being connected to the same IDE
    Your HP would have probably kept your GH22 at UDMA 2

Food for thought

-anyway-

You should love your LG GH22
I have one :wink:
It’s an excellent Burner

[B]6/19/2008 7:53:27 AM info F8 key click: Open temporary log file
6/19/2008 7:53:23 AM info [COLOR=“darkgreen”]Copy completed.
6/19/2008 7:53:23 AM info Writer: Finalization Time 00:00:20 - Total completion time 00:05:54
6/19/2008 7:53:23 AM info Writer: WRITE SUCCESS
6/19/2008 7:53:03 AM info Writer: Write finished in 00:05:34 - Finalization start here. Avg. burn rate 10.96
6/19/2008 7:47:41 AM info Writer: Lead-in burning time (mS) 12361
6/19/2008 7:47:28 AM info Writer: Write started 2253392 sectors to write
6/19/2008 7:47:28 AM info Writer: Init success: DVD-R DAO
6/19/2008 7:47:28 AM info Writer: Writing speed requested x12.0, effective x12.0
6/19/2008 7:47:28 AM info Writer: Available write speed: 24x, 20x, 16x, 12x, 8x, 4x
6/19/2008 7:47:28 AM info Writer: Media ID: MCC 03RG20
6/19/2008 7:47:28 AM info Writer: Media type: DVD-R
6/19/2008 7:47:28 AM info Writer: Ultra DMA mode 4 (ATA66)
6/19/2008 7:47:26 AM info Available Virtual Memory : 1702 MB.
6/19/2008 7:47:26 AM info Total Virtual Memory : 2047 MB.
6/19/2008 7:47:26 AM info Memory Load : 19%
6/19/2008 7:47:26 AM info Available Physical Memory : 2047 MB.
6/19/2008 7:47:26 AM info Total Physical Memory : 2047 MB.
6/19/2008 7:47:26 AM info Writer: Scanned files #23, folder #2 - total size 4613797888 b. (4.3 Gb.)
6/19/2008 7:47:26 AM info Writer: Inserted media type : DVD-R
6/19/2008 7:47:26 AM info Writer: Write started
6/19/2008 7:47:25 AM info Volume name THE_NUDE_BOMB
6/19/2008 7:47:25 AM info Source path for burning "G:\1CLICKPRO_TEMP\THE_NUDE_BOMB\VIDEO_TS"
6/19/2008 7:47:04 AM info Writer: New media inserted. Burning layer is ready to write
6/19/2008 7:47:03 AM info Writer: Compatible media types :
DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
6/19/2008 7:47:03 AM info Writer: New Drive selected : 0:0:0 - HL-DT-ST DVD-RAM GH22NP20 1.00 [E] (Ide)
6/19/2008 7:47:03 AM info IFO reallocation not required
6/19/2008 7:47:03 AM info Transcoding time: 0:13:33
6/19/2008 7:33:29 AM info Transcoding started…
6/19/2008 7:33:29 AM info Targeted destination size 4421 Mb.
6/19/2008 7:33:29 AM info Subtitle #0 (Language Unspecified) is included
6/19/2008 7:33:29 AM info Menu of Titleset 4 Included, Video copied (no size redux.)
6/19/2008 7:33:29 AM info Subtitle #0 (Language Unspecified) is included
6/19/2008 7:33:29 AM info Menu of Titleset 3 Included, Video copied (no size redux.)
6/19/2008 7:33:29 AM info Subtitle #0 (Language Unspecified) is included
6/19/2008 7:33:29 AM info Menu of Titleset 2 Included, Video copied (no size redux.)
6/19/2008 7:33:29 AM info Subtitle #0 (English) is included
6/19/2008 7:33:29 AM info Menu of Titleset 1 Included, Video copied (no size redux.)
6/19/2008 7:33:29 AM info Subtitle #0 (Language Unspecified) is included
6/19/2008 7:33:29 AM info Video Manager Menu Included, Video reduced to 71% of original size
6/19/2008 7:33:29 AM info Audio #0 (English AC3 6ch) is included
6/19/2008 7:33:29 AM info Titleset 4 Included, Video reduced to 71% of original size
6/19/2008 7:33:29 AM info Audio #0 (English AC3 6ch) is included
6/19/2008 7:33:29 AM info Titleset 3 Included, Video reduced to 71% of original size
6/19/2008 7:33:29 AM info Titleset 2 Included, Video reduced to 0% of original size
6/19/2008 7:33:29 AM info Subtitle #1 (Français) is included
6/19/2008 7:33:29 AM info Subtitle #0 (English) is included
6/19/2008 7:33:29 AM info Audio #0 (English AC3 2ch) is included
6/19/2008 7:33:29 AM info Titleset 1 Included, Video reduced to 71% of original size
6/19/2008 7:33:29 AM info Transcoding started …
6/19/2008 7:33:29 AM info Overall Video Compression: 29.0%
6/19/2008 7:33:29 AM info Working Folder has “224730 Mb.” of free space
6/19/2008 7:33:29 AM info Working Folder : G:\1CLICKPRO_TEMP
6/19/2008 7:33:29 AM info Destination : [E] HL-DT-ST DVD-RAM GH22NP20 1.00 (Ide)
6/19/2008 7:33:29 AM info Source size : 6.0290 GB
6/19/2008 7:33:29 AM info Source : [F] TSSTcorp CDDVDW SH-S203N SB01 (Ide)
6/19/2008 7:33:29 AM info Preset: Full Disc - Everything, with compression (Not Recommended)
6/19/2008 7:33:29 AM info Disable Interactive Media Player: FALSE
6/19/2008 7:33:29 AM info Dual Layer Media: FALSE
6/19/2008 7:33:29 AM info Movie Only Menus: TRUE
6/19/2008 7:33:29 AM info Keep Subtitles: TRUE
6/19/2008 7:33:29 AM info Prefer DTS Audio: FALSE
6/19/2008 7:33:29 AM info Enable media stats collection - VSO: FALSE
6/19/2008 7:33:29 AM info Turn off computer after burn: FALSE
6/19/2008 7:33:29 AM info Delete temporary files: FALSE
6/19/2008 7:33:29 AM info Warn before erasing RW media: FALSE
6/19/2008 7:33:29 AM info Allow DVD tray eject: FALSE
6/19/2008 7:33:29 AM info Prompt for another copy of the same source: TRUE
6/19/2008 7:33:29 AM info Preferred Burn Speed: x12
6/19/2008 7:33:29 AM info DVD-R Write Mode: Prefer DAO(SAO)
6/19/2008 7:33:29 AM info Save Menu Preset: TRUE
6/19/2008 7:33:29 AM info Show Hint popups: FALSE
6/19/2008 7:33:29 AM info START button clicked
6/19/2008 7:33:29 AM info Read access layer: Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
6/19/2008 7:33:23 AM info Volume name: THE_NUDE_BOMB
6/19/2008 7:33:23 AM info This DVD requires error correction.
6/19/2008 7:33:23 AM info Scanning Source files…
6/19/2008 7:33:20 AM info Destination: [E] HL-DT-ST DVD-RAM GH22NP20 1.00 (Ide) - Ultra DMA mode 4 (ATA66)
6/19/2008 7:33:20 AM info Source: [F] TSSTcorp CDDVDW SH-S203N SB01 (Ide) - Ultra DMA mode 4 (ATA66)
6/19/2008 7:33:20 AM info DVD2DVD: 5.6.5.0 VSO_HWE: 2.1.7.338 BOUDUCON: 2.2.0.42
6/19/2008 7:33:20 AM info CPRx error correction enabled : [COLOR=“DarkRed”]FALSE[/COLOR]
6/19/2008 7:33:20 AM info AnyDVD - Protection based on unreadable sectors: [COLOR=“DarkGreen”]TRUE[/COLOR]
6/19/2008 7:33:20 AM info AnyDVD Safe Mode: FALSE
6/19/2008 7:33:20 AM info AnyDVD process detected: 6.4.5.0
6/19/2008 7:33:20 AM info [F] TSSTcorp CDDVDW SH-S203N SB01 (Ide)
6/19/2008 7:33:20 AM info [E] HL-DT-ST DVD-RAM GH22NP20 1.00 (Ide)
6/19/2008 7:33:20 AM info Loading reader listbox
6/19/2008 7:33:20 AM info [F] TSSTcorp CDDVDW SH-S203N SB01 (Ide)
6/19/2008 7:33:20 AM info [E] HL-DT-ST DVD-RAM GH22NP20 1.00 (Ide)
6/19/2008 7:33:20 AM info Loading writer listbox
6/19/2008 7:33:20 AM info Update Notification enabled : FALSE
6/19/2008 7:33:20 AM info AutoPlay setting: Enabled
6/19/2008 7:33:19 AM info User default language : 1033 (0x0409h) - English (United States)
6/19/2008 7:33:19 AM info System default language : 1033 (0x0409h) - English (United States)
6/19/2008 7:33:19 AM info Version 3.1.8.3
6/19/2008 7:33:19 AM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy Pro\1ClickDvdCopyPro.exe"
6/19/2008 7:33:19 AM info OS : Microsoft Windows XP Personal Service Pack 3 (Build 2600)
6/19/2008 7:33:18 AM info ******************** Report session started ********************[/B][/COLOR]

:slight_smile:

Yes its great. I am not too worried about having more than one drive. Just more money for a college student to throw out! I have a few more questions regarding something totally different that maybe you can help me out with since you’ve been so great! But for now, here’s the log! (Feels so good to be able to post something of success!)

6/18/2008 9:52:52 PM info ******************** Report session closed *********************
6/18/2008 9:52:47 PM info Writer: Media removed. Burning layer not ready to write
6/18/2008 9:46:46 PM info Copy completed.
6/18/2008 9:46:46 PM info Writer: Finalization Time 00:00:32 - Total completion time 00:04:16
6/18/2008 9:46:14 PM info Writer: Write finished in 00:03:44 - Finalization start here. Avg. burn rate 7.34
6/18/2008 9:42:51 PM info Writer: Lead-in burning time (mS) 0
6/18/2008 9:42:29 PM info Writer: Write started 1015072 sectors to write
6/18/2008 9:42:29 PM info Writer: Writing speed requested x16.0, effective x16.0
6/18/2008 9:42:29 PM info Writer: Available write speed: 16x, 12x, 8x, 4x
6/18/2008 9:42:29 PM info Writer: Media ID: DAXON-AZ3-00
6/18/2008 9:42:29 PM info Writer: Media type: DVD+R
6/18/2008 9:42:29 PM info Writer: Ultra DMA mode 2 (ATA33)
6/18/2008 9:42:29 PM info Available Virtual Memory : 1813 MB.
6/18/2008 9:42:29 PM info Total Virtual Memory : 2047 MB.
6/18/2008 9:42:29 PM info Memory Load : 59%
6/18/2008 9:42:29 PM info Available Physical Memory : 206 MB.
6/18/2008 9:42:29 PM info Total Physical Memory : 511 MB.
6/18/2008 9:42:29 PM info Writer: Scanned files #7, folder #2 - total size 2077755392 b. (1.94 Gb.)
6/18/2008 9:42:29 PM info Writer: Inserted media type : DVD+R
6/18/2008 9:42:29 PM info Writer: Write started
6/18/2008 9:42:27 PM info Volume name DVD_01_1
6/18/2008 9:42:27 PM info Source path for burning "C:\Documents and Settings\Owner\Desktop\Goodfellas\DVD_01_1\VIDEO_TS"
6/18/2008 9:42:27 PM info Writer: New media inserted. Burning layer is ready to write
6/18/2008 9:42:26 PM info Writer: Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
6/18/2008 9:42:26 PM info Writer: New Drive selected : 1:0:0 - HL-DT-ST DVD-RAM GH22LP20 1.00 [E] (Ide)
6/18/2008 9:42:26 PM info Writer: Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
6/18/2008 9:42:26 PM info IFO reallocation not required
6/18/2008 9:42:26 PM info Working Folder has “37299 Mb.” of free space
6/18/2008 9:42:26 PM info Working Folder : C:\Documents and Settings\Owner\Local Settings\Application Data\1Click DVD Copy Pro
6/18/2008 9:42:26 PM info Destination : [E] HL-DT-ST DVD-RAM GH22LP20 1.00 (Ide)
6/18/2008 9:42:26 PM info Source size : 1.9349 GB
6/18/2008 9:42:26 PM info Source : C:\Documents and Settings\Owner\Desktop\Goodfellas\DVD_01_1\VIDEO_TS
6/18/2008 9:42:26 PM info Preset: Exact Copy - Everything, no compression (Double Layer if original > 4.7 GB)
6/18/2008 9:42:26 PM info Disable Interactive Media Player: TRUE
6/18/2008 9:42:26 PM info Dual Layer Media: FALSE
6/18/2008 9:42:26 PM info Movie Only Menus: FALSE
6/18/2008 9:42:26 PM info Keep Subtitles: FALSE
6/18/2008 9:42:26 PM info Prefer DTS Audio: TRUE
6/18/2008 9:42:26 PM info Enable media stats collection - VSO: TRUE
6/18/2008 9:42:26 PM info Turn off computer after burn: FALSE
6/18/2008 9:42:26 PM info Delete temporary files: TRUE
6/18/2008 9:42:26 PM info Warn before erasing RW media: TRUE
6/18/2008 9:42:26 PM info Allow DVD tray eject: TRUE
6/18/2008 9:42:26 PM info Prompt for another copy of the same source: FALSE
6/18/2008 9:42:26 PM info Preferred Burn Speed: Max
6/18/2008 9:42:26 PM info DVD-R Write Mode: Default - Let burn engine decide
6/18/2008 9:42:26 PM info Save Menu Preset: FALSE
6/18/2008 9:42:26 PM info Show Hint popups: TRUE
6/18/2008 9:42:26 PM info START button clicked
6/18/2008 9:42:26 PM info Read access layer: Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
6/18/2008 9:42:02 PM info Volume name: DVD_01_1
6/18/2008 9:41:59 PM info New Source: C:\Documents and Settings\Owner\Desktop\Goodfellas\DVD_01_1\VIDEO_TS
6/18/2008 9:41:44 PM info Volume name: DVD_01_1
6/18/2008 9:41:44 PM info Scanning Source files…
6/18/2008 9:41:41 PM info Destination: [E] HL-DT-ST DVD-RAM GH22LP20 1.00 (Ide) - Ultra DMA mode 2 (ATA33)
6/18/2008 9:41:41 PM info Source: C:\Documents and Settings\Owner\Desktop\Movies\Shooter\DVD_01_1\VIDEO_TS
6/18/2008 9:41:41 PM info DVD2DVD: 5.6.2.6 VSO_HWE: 2.1.3.324 BOUDUCON: 2.0.0.145
6/18/2008 9:41:41 PM info [E] HL-DT-ST DVD-RAM GH22LP20 1.00 (Ide)
6/18/2008 9:41:41 PM info Loading reader listbox
6/18/2008 9:41:41 PM info [E] HL-DT-ST DVD-RAM GH22LP20 1.00 (Ide)
6/18/2008 9:41:41 PM info Loading writer listbox
6/18/2008 9:41:40 PM info Update Notification enabled : TRUE
6/18/2008 9:41:40 PM info AutoPlay setting: Enabled
6/18/2008 9:41:38 PM info User default language : 1033 (0x0409h) - English (United States)
6/18/2008 9:41:38 PM info System default language : 1033 (0x0409h) - English (United States)
6/18/2008 9:41:38 PM info Version 3.1.2.3
6/18/2008 9:41:38 PM info ExeName : "C:\Program Files\LG Software Innovations\1Click DVD Copy Pro\1ClickDvdCopyPro.exe"
6/18/2008 9:41:38 PM info OS : Microsoft Windows XP Personal Service Pack 2 (Build 2600)
6/18/2008 9:41:37 PM info ******************** Report session started ********************

There it is. This shows that the ultra dma mode is 2. Who cares? It works and it burned it in 4 minutes!

But anyways, I use WinAvi Converter to convert avi to dvd then burn with one click. Using Nero usually takes me pretty much all night to do! So I only do that if I am going to bed and dont plan on using the computer anymore that night!

I have been reading that WinAvi is not the best for quality but it is for speed! I recently got ConvertXtoDVD and that did the whole process overnight. So that took forever too!

WinAvi usually takes about an hour to convert. If this is the fastest converter out, in most instances, is the only way to speed it up to buy more ram. I was looking into getting another gig of ram since I have 512mb right now. So stuff doesnt run so smooth. I know I need a new computer since this one is WAY outdated. But it works pretty good.

If ram is a good option of speeding up pretty much EVERYTHING on my computer, can you give me a link to some sites where I can find a gig for pretty cheap? I looked on new egg. BTW, its pc2100. If you dont do so much of the computer hardware as you do software, just let me know. But your help, or anyone’s for that matter, would be much appreciated.

Thanks for all your help!

[QUOTE=mikeb1222;2080233]Yes its great. I am not too worried about having more than one drive. Just more money for a college student to throw out! I have a few more questions regarding something totally different that maybe you can help me out with since you’ve been so great! But for now, here’s the log! (Feels so good to be able to post something of success!)

There it is. This shows that the ultra dma mode is 2. Who cares? It works and it burned it in 4 minutes!

[/QUOTE]

Open 1Click -
[I][B]Right Click on the 1Click Interface > Settings Menu [/B][/I]

>>Set= Your “Preferred Burn Speed” at 1/2 of your Media’s rating
ie: IF You’re using 16x Media = [I][B]Set for 8x[/B][/I] ;
8x Media = Set for 4x

If using Good quality Media -
My GH22NP20 burns Perfect Burns every time at 12x
Burns good at 16x , 20x and 22x - too

  • but the most consistent / best Quality Burns are at 12x

>>[B]UN[/B] Check= Enable media stats collection - VSO

[QUOTE=mikeb1222;2080233]
But anyways, I use WinAvi Converter to convert avi to dvd then burn with one click. Using Nero usually takes me pretty much all night to do! So I only do that if I am going to bed and don’t plan on using the computer anymore that night!

I have been reading that WinAvi is not the best for quality but it is for speed! I recently got ConvertXtoDVD and that did the whole process overnight. So that took forever too!

WinAvi usually takes about an hour to convert. If this is the fastest converter out, in most instances, is the only way to speed it up to buy more ram. I was looking into getting another gig of ram since I have 512mb right now. So stuff doesn’t run so smooth. I know I need a new computer since this one is WAY outdated. But it works pretty good.

If ram is a good option of speeding up pretty much EVERYTHING on my computer, can you give me a link to some sites where I can find a gig for pretty cheap? I looked on new egg. BTW, its pc2100. If you don’t do so much of the computer hardware as you do software, just let me know. But your help, or anyone’s for that matter, would be much appreciated.

Thanks for all your help![/QUOTE]

Yes , Definitely Add Some RAM
It will help with everything on your Computer
512Mb is minimal
I run 4 GB ( over-kill )

You can Go here :
Scan your Computer
the Scan will tell you : What you have > against > What you could have


( I’m not recommending Crucial RAM necessarily … just using their scanner :wink: )

Then … Take the Scan Result Specs
… and Cross Reference here :
http://www.newegg.com/Product/ProductConfigurator.aspx?category=17&name=Memory-Configurator
( Newegg has some really good Prices :wink: )

Your main concern about the Speed in the Conversion

  • Is your Processor
    The Faster the Processor - the Faster the Conversion
    Adding some RAM should help a little
  • As would closing any Unnecessary Background Programs ( EnditALL )

An Hour is Normal , I think

  • for this type of Conversion - even with the fastest CPUs

You should also give [B]1ClickDVDMovie[/B] a try

Honestly , I don’t mess with Downloads/Conversions
I stick to the DVDs
I can give you some Computer pointers

  • but I don’t have any experience with the ‘Conversions’

Which - HP/Model : Processor/@speed - are you using in this Computer ?

:slight_smile:

Wow over 4gb of ram. Must be nice.

My computer is an HP Pavilion 764n. (yes its very old…2002…but works great for everything that I need to use it for). Thats the reason why I havent bought a new one yet. Just looking to install some upgrades.

My processor is an Intel Pentium 4 at 2.66ghz. So very slow compared to todays core duo running at 2.0 x2. It runs pc2100 ddr ram. Cheapest on newegg was 30. But will the cheapest work? You get what you pay for!

I will also try out that 1click movie program. I have nero 7 but not a big fan as the user interface took a while to get used to in the individual programs. So maybe that will replace nero for me. We will see!

Thanks,
Mike

Another question. I have been hearing about this overclocking thing. If you could explain that as best you can and tell me if that would be a good idea for a little bit more speed.

I ran the scan and it told me that my maximum capacity is 1gb so I guess that was a good thing you gave me that. I just dont really understand why you cant put a 1gb memory whatever into the slot. Do they only hold a certain size? Or is that all that I am capable of is an additional 512?

Thanks!
Mike

[QUOTE=mikeb1222;2080431]Wow over 4gb of ram. Must be nice.

My computer is an HP Pavilion 764n. (yes its very old…2002…but works great for everything that I need to use it for). Thats the reason why I haven’t bought a new one yet. Just looking to install some upgrades.

My processor is an Intel Pentium 4 at 2.66ghz. So very slow compared to todays core duo running at 2.0 x2. It runs pc2100 ddr ram. Cheapest on NewEgg was 30. But will the cheapest work? You get what you pay for!

I will also try out that 1click movie program. I have Nero 7 but not a big fan as the user interface took a while to get used to in the individual programs. So maybe that will replace Nero for me. We will see!

Thanks,
Mike

Another question. I have been hearing about this overclocking thing. If you could explain that as best you can and tell me if that would be a good idea for a little bit more speed.

I ran the scan and it told me that my maximum capacity is 1gb so I guess that was a good thing you gave me that. I just don’t really understand why you cant put a 1gb memory whatever into the slot. Do they only hold a certain size? Or is that all that I am capable of is an additional 512?

Thanks!
Mike[/QUOTE]

The definition of the RAM - that will be Supported

  • lies with the motherboard Specs

[B]HP Pavilion 764n Desktop PC (US/CAN)[/B]

[B]HP Pavilion 764n Desktop PC - Product Specifications[/B]

MS-6577 motherboard / Socket mPGA478

According to HP , Your Motherboard will Support 2 GB max
You’ll have to toss the old RAM

  • and Install Two - 1 GB sticks

[B]Memory
Component Attributes
RAM (installed) 512 / PC2100 DDR
[COLOR=“DarkGreen”]Maximum allowed 2 GB (requires replacement of the installed 512 DIMM)
Speed supported PC2100 / PC1600
Type DDR SDRAM
DIMM slots Two
Open slots One[/B][/COLOR]

You might want to Verify this with HP Support

  • but in my experience - HP support will know less about it than you do
    :confused:

Will you notice a Difference between 512 and 1024 ?
Absolutely
Will you notice a Difference between 1024 and 2048 ?
Maybe a little - depending on the Usage
The greatest increase of performance will any step Up from 512

I’d hate to advise you wrong

  • both the Crucial and Newegg sites say 1GB max
    This information -may- be incomplete
    HP says 2GB max

I wouldn’t spend too much for ‘high speed’ RAM

  • for this Computer
    I would doubt that it would be utilized to it’s potential anyway
    Your least expensive route would be to just add 1-512mb stick
    You might get a little better performance by adding two new matching 512 sticks
  • Or , Go for broke and add 2-1GB sticks

I’m not sure what I would do in your shoes
Adding ODDs and HDDs are one thing

  • You can always move them to a new Computer
    The RAM can only be used with this type of Motherboard
  • so It will be left with the Computer when you finally move on
    However , If there is only a Difference of $5-$10
    I wouldn’t be Cheap
    … but it appears that your selections for PC2100 are somewhat limited

$60.00 for 2GB isn’t too bad though
http://www.newegg.com/Product/Product.aspx?Item=N82E16820141217
My OCZ Plat - was about $45 per GB (+/-)

There is also the option
of checking your local ‘Mom and Pop’ computer /repair shops
You might be able to find a deal on some used RAM

I doubt that your motherboard supports any ‘Overclocking’ - whatsoever
Your P4 is probably being pushed to limits - as it is

I’m in the process of starting to Build a New Computer
My HP a820n / P4 HT @ 3.20Ghz is showing it’s age
looking forward to a Quad
I’ve been looking at cases for a month :eek:

  • still haven’t decided … just too many choices @Newegg :wink:

:slight_smile:

Yea I will probably just pick up a 512 from newegg for like 20 bucks. Thats really not bad. And hopefully soon I will get a new cpu. But I dont use it for much except dvds and internet. and now that I have sprints new phone with full internet browsing, I wont use the net as much anymore. So other than writing documents, which can be done on probably any computer that runs, and burning dvds, I dont really use it much! But the ram would help me out and I might be able to scrape up 20 bucks from somewhere…! :slight_smile: but I really appreciate all of your help and thanks for everything. Good luck with the new computer!