Dvd burning problem

i cant burn anymore, always crashes a bit before the end
i used diffirent media & several burnprograms

anyone who has an idea what this log says:

thx
franky
.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’:
Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 14:49:52
Nero version: 6.3.0.0
Recorder: <TOSHIBA DVD-ROM SD-R5002>Version: 1033 - HA 0 TA 0 -
6.3.0.0
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-R5002>Version: 1033 - HA 0 TA 0 -
6.3.0.0
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : TOSHIBA DVD-ROM SD-R5002 atapi Port 0 ID 0
DMA: On
DiskPeripheral : ST36531A atapi Port 0 ID 1
DMA: On
DiskPeripheral : WDC WD205AA atapi Port 1 ID 0
DMA: On
DiskPeripheral : ST3120022A atapi Port 1 ID 1
DMA: On

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R5002 F: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 103MB (105644kB)
Memory in use : 59 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2003
Burn DVD Image
19:39:42 #1 Text 0 File Reader.cpp, Line 118
Reader running

19:39:42 #2 Text 0 File Writer.cpp, Line 124
Writer TOSHIBA DVD-ROM SD-R5002 running

19:39:42 #3 Text 0 File Burncd.cpp, Line 3094
Turn on Disc-at-once, using DVD media

19:39:42 #4 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2095541 (465:40.41)

19:39:42 #5 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE

19:39:42 #6 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: TOSHIBA DVD-ROM SD-R5002, Media type: DVD-R
Disc Manufacturer: CMC MA - G.
Disc Application Code: 64, Disc Physical Code: 193

19:39:42 #7 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<

19:39:42 #8 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2095542 (2095542) = #2095542/465:40.42
not relocatable, disc pos for caching/writing not required/not
required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2095542 blocks [TOSHIBA DVD-ROM SD-R5002]

19:39:42 #9 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [TOSHIBA DVD-ROM SD-R5002] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0
4291670016, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2095542 | lead-out | 1 | 0x00 | 0x41

19:39:42 #10 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

19:39:43 #11 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.

19:39:43 #12 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

19:39:43 #13 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 1x (1.380 KB/s)

19:39:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0

19:39:43 #15 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:01,475 (781475ms) -> OK

19:39:43 #16 Text 0 File DVDR.cpp, Line 1424
Recording mode: Sequential Recording Mode

19:39:43 #17 Text 0 File Mmc.cpp, Line 19397
Set BUFE: supported -> ON

19:39:43 #18 Text 0 File DVDR.cpp, Line 1539
Start write address at LBA 0
DVD high compatibility mode: Yes

19:39:43 #19 Text 0 File Cdrdrv.cpp, Line 7912
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW,
DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

20:15:44 #20 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x06FA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x15 0x92 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

20:15:44 #21 CDR -1135 File Writer.cpp, Line 301
Write error

20:15:44 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

20:15:44 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

20:15:44 #24 Text 0 File DVDR.cpp, Line 1743
EndDAO: Last written address was 1413695

20:15:44 #25 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

20:15:44 #26 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

20:15:44 #27 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 1x (1.380 KB/s)

Existing drivers:
File ‘Drivers\atapi.sys’: Ver=5.1.2600.0 (XPClient.010817-1148), size=86656
bytes, created 7/09/2001 13:00:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs :
0 (Security Option)