DVD Burning Problem

vbimport

#1

I am quite new to burning dvd’s and would like advise on the problem i have. I have looked at many forums trying to search for the solution to my problem and have had no luck.

I have an iso file which i would like to burn to a Verbatim DVD+R blank disc, but i seem to have problems. I’ve used many programs but i have had no success using any of them. The name of my cd drive is HL-DT-ST DVD±RW GWA4164B.

When using nero, i get an ‘Unspecified Recorder Error’.

The error log is as follows:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0

Recorder: <hl-dt-st dvd±rw="" gwa4164b="">Version: E113 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <ide> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <hl-dt-st dvd±rw="" gwa4164b="">Version: E113 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <ide> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD±RW GWA4164B atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PU1619X VWA897Q 1.0 aitcvux8 Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD±RW GWA4164B D: CdRom0
PU1619X VWA897Q I: CdRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1570892kB)
Free physical memory: 812MB (831932kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.4.2008
Burn DVD Image
21:59:55 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:59:56 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

21:59:56 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2248319 (499:37.44, 4391MB)

21:59:56 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

21:59:56 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD±RW GWA4164B, Media type: DVD+R
Disc Manufacturer ID: <mcc>, Media Type ID: <004>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

21:59:56 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:59:56 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2248320 (2248320) = #2248320/499:37.45
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2248320 blocks [D: HL-DT-ST DVD±RW GWA4164B]
--------------------------------------------------------------

21:59:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: HL-DT-ST DVD±RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4604559360, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2248320 | 2248320 | 0x00
2248320 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:59:56 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:59:56 #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

21:59:56 #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

21:59:56 #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

21:59:56 #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

21:59:56 #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5,540 KB/s)

21:59:56 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

21:59:56 #16 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC…
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…783]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 …MCC…004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …
01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01 …88.,Z…#…
00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00 …,Z…#…
02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …Tp.0c<$…
00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B …@fB$…+
03 00 54 DF 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …T…0c<$…
00 00 02 75 5E 58 24 14 - 0A 0A 01 20 00 00 00 59 …u^X$…Y
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

21:59:56 #17 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

21:59:56 #18 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

22:31:02 #19 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x80
Sense Qual: 0x04
CDB Data: 0x2A 00 00 19 5E 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 80 04
Buffer x0ad3d140: Len x10000
0x00 00 01 BA 45 D8 B6 56 DD 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 CF 7F BC 10 C3 11 89 85 A5
0x9F E6 E4 1B A4 30 BE 85 FF F3 55 01 40 18 BE 6F

22:31:02 #20 CDR -1 File Writer.cpp, Line 306
Unspecified Recorder Error
D: HL-DT-ST DVD±RW GWA4164B

22:31:26 #21 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1662592

22:31:26 #22 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5,540 KB/s)

22:31:26 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

22:31:32 #24 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

22:31:32 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I hope someone can solve my problem, would be much appreciated.</not></mcc></ide></hl-dt-st></ide></hl-dt-st>


#2

Welcome to CDF! :slight_smile:

Looks like DMA isn’t enabled for your DVD burner - have a look at the link in my signature (“How to check/enable DMA”) for instructions on how to get it enabled.

That’s about the only thing I can see, maybe another member will pick up on anything I’ve missed :slight_smile:


#3

I would try ImgBurn, just to see if it’s a problem with your Nero.

http://www.imgburn.com/


#4

Fix DMA, then try again.

HL-DT-ST DVD±RW GWA4164B atapi Port 0 ID 0 [B]DMA: Off[/B]


#5

When i went to enable my DMA, i fount that DMA had already been turned on both my IDE channels. Why is it not showing that its enabled on my error log ?

I don’t think should be anything to do with Nero because i have tried other programs and they didn’t work.
And i haven’t tried burning with imgburn, so i will try that.


#6

you need to uninstall your secondary Ide channel and reboot, windows will reinstall it and your drives.


#7

After version 6, I have seen a few Nero logs that show a drives DMA is off when actually it is not. ImgBurn does create a log as well, so if it fails, please post that log.


#8

[QUOTE=graysboi;2040874]When i went to enable my DMA, i fount that DMA had already been turned on both my IDE channels. Why is it not showing that its enabled on my error log ?[/QUOTE]

The Current Transfer Mode for all your drives shows UDMA Mode x (where x is a number), and none of them say PIO Mode?

Just to be sure, as it’s often thought that “DMA if available” is enough :slight_smile:


#9

Well, i’ve uninstalled my IDE channels then rebooted my computer so it reinstalls them.
I then checked if DMA was enabled on my IDE channels. I set my IDE channels to ‘DMA if available’.
I then tryed burning a dvd with nero again. This time it still did not work.

This is the error log that was created :

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVD±RW GWA4164B>Version: E113 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVD±RW GWA4164B>Version: E113 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD±RW GWA4164B atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD±RW GWA4164B D: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1534MB (1570892kB)
Free physical memory: 907MB (929784kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.4.2008
Burn DVD Image
14:29:49 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:29:49 #2 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

14:29:49 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2248319 (499:37.44, 4391MB)

14:29:49 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14:29:49 #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVD±RW GWA4164B, Media type: DVD+R
Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

14:29:49 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:29:49 #7 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2248320 (2248320) = #2248320/499:37.45
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2248320 blocks [D: HL-DT-ST DVD±RW GWA4164B]
--------------------------------------------------------------

14:29:49 #8 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: HL-DT-ST DVD±RW GWA4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4604559360, ISRC ""
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2248320 | 2248320 | 0x00
2248320 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:29:49 #9 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14:29:49 #10 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

14:29:49 #11 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

14:29:49 #12 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

14:29:49 #13 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

14:29:49 #14 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 12x (16,620 KB/s)

14:29:49 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

14:29:49 #16 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC…
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…783]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 …MCC…004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …
01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01 …88.,Z…#…
00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00 …,Z…#…
02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …Tp.0c<$…
00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B …@fB$…+
03 00 54 DF 02 30 63 3C - 24 14 0C 0C 01 20 00 00 …T…0c<$…
00 00 02 75 5E 58 24 14 - 0A 0A 01 20 00 00 00 59 …u^X$…Y
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

14:29:49 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04bb24c0: Len x648

14:29:49 #18 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

14:29:49 #19 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

15:27:57 #20 SPTI -1 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x80
Sense Qual: 0x04
CDB Data: 0x2A 00 00 19 5E E0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 80 04
Buffer x0ba6d200: Len x10000
0x00 00 01 BA 45 D8 BE 20 04 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 A4 28 70 06 D2 47 2D 89 F7
0x7D 0A 92 4F 1F F9 E1 C0 32 B6 75 9D 8D E0 2F 22

15:27:57 #21 CDR -1 File Writer.cpp, Line 306
Unspecified Recorder Error
D: HL-DT-ST DVD±RW GWA4164B

15:28:28 #22 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1662688

15:28:28 #23 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 12x (16,620 KB/s)

15:28:28 #24 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:28:35 #25 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

15:28:35 #26 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I will try imgburn in a little while and post the results.


#10

Still says DMA is off - again, are there any IDE channels that say “PIO Mode”?

If ImgBurn fails also, please post the log for that too :wink:


#11

I am using Verbatim DVD+R with a max speed of 16x
what speed do you think i should use to burn my dvds ?


#12

8x or 12x should be fine, I misread the mediacode (MCC004 - thought it was MCC003, which are 8x discs).


#13

[QUOTE=graysboi;2041008]I am using Verbatim DVD+R with a max speed of 16x
what speed do you think i should use to burn my dvds ?[/QUOTE]

Useless to ask because DMA mode is still not fixed…