Dvd burning error "invalid block address"

vbimport

#1

Software: Nero 7
DVD Drive Model: HL-DT-ST ram.cfm" class=“forum_link” target="_blank">DVD-RAM GSA-H22N

ISSUE: UNABLE TO BURN A DVD

I’m having a lot of trouble trying to burn a DVD. I’ve never had any issues until today. At the end of the simulation I receive an error message “INVALID BLOCK ADDRESS”. DMA is enabled. I’ve tried un-installing and re-installing Nero 7, updated the firmware, cleared up some disk space, nothing has worked. Any help would be greatly appreciated, I’m completely stumped here.

ERROR LOG:

A Richardson

1C82-serial number removed by moderator

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.7.5.1
Internal Version: 7, 7, 5, 1

Recorder: <HL-DT-ST DVD-RAM GSA-H22N>Version: 1.00 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H22N>Version: 1.00 - HA 1 TA 0 - 7.7.5.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H22N D: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
BUFE : 0
Physical memory : 479MB (490864kB)
Free physical memory: 147MB (151168kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

23.10.2009
UDF/ISO compilation
6:29:31 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

6:29:32 PM #2 Phase 112 File dlgbrnst.cpp, Line 1760
DVD-Video files reallocation started

6:29:32 PM #3 Phase 114 File dlgbrnst.cpp, Line 1760
DVD-Video files reallocation completed (no file modified)

6:29:32 PM #4 Text 0 File Isodoc.cpp, Line 6527
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:29:32 PM #5 Phase 111 File dlgbrnst.cpp, Line 1760
DVD-Video files sorted

6:29:32 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

6:29:32 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)

6:29:32 PM #8 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media

6:29:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2267903 (503:58.53, 4429MB)

6:29:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

6:29:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: HL-DT-ST DVD-RAM GSA-H22N, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193

6:29:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:29:32 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2267904 (2267904) = #2267904/503:58.54
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2267904 blocks [D: HL-DT-ST DVD-RAM GSA-H22N]
--------------------------------------------------------------

6:29:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [D: HL-DT-ST DVD-RAM GSA-H22N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4644667392, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2267904 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2267904 | 0 | 0x00
2267904 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

6:29:32 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

6:29:32 PM #16 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

6:29:32 PM #17 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.

6:29:32 PM #18 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

6:29:32 PM #19 Phase 32 File dlgbrnst.cpp, Line 1760
Simulation started at 4x (5,540 KB/s)

6:29:32 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:29:32 PM #21 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode

6:29:32 PM #22 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

6:29:32 PM #23 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:45:04 PM #24 Text 0 File WriterStatus.cpp, Line 113
<D: HL-DT-ST DVD-RAM GSA-H22N> start writing Lead-Out at LBA 2267904 (229B00h), length 0 blocks

6:45:04 PM #25 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 2267903

6:45:47 PM #26 Phase 33 File dlgbrnst.cpp, Line 1760
Simulation completed successfully at 4x (5,540 KB/s)

6:45:49 PM #27 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (5,540 KB/s)

6:45:49 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:45:49 PM #29 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode

6:45:49 PM #30 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes

6:45:49 PM #31 Text 0 File Cdrdrv.cpp, Line 9288
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

6:45:52 PM #32 SPTI -1064 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
Buffer x08bf0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

6:45:52 PM #33 CDR -1064 File Writer.cpp, Line 301
Invalid block address
D: HL-DT-ST DVD-RAM GSA-H22N

6:45:52 PM #34 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was -1

6:45:53 PM #35 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (5,540 KB/s)

6:45:55 PM #36 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

6:46:01 PM #37 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed

6:46:01 PM #38 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I UPDATED THE FIRMWARE BUT THE PROBLEM PERSISTS


#2

I would give ImgBurn a shot. BTW, this is barely enough.

Free physical memory: 147MB (151168kB)


#3

I would buy better media: Verbatim & TY.