DVD Burner fails

vbimport

#1

Ok, I have tried everything. DMA is fine, Disk is defragmented, cleaned out, uninstalled and reinstalled Nero. This is the log. Someone please help!

5:05 PM 09/09/2008

1C82-A0K5-19E5-MAAX-400E-0EC2-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0

Recorder: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4084N atapi Port 0 ID 0 DMA: On
DiskPeripheral : HTS541010G9SA00 iaStor Port 1 ID 0 DMA: On
DiskPeripheral : HTS541010G9SA00 iaStor Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4084N F: CdRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046572kB)
Free physical memory: 424MB (434388kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.9.2008
ISO compilation
5:02:45 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

5:02:46 PM #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:02:46 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

5:02:46 PM #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

5:03:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2245135 (498:55.10, 4385MB)

5:03:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO

5:03:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4084N, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

5:03:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD-RAM, DVD+R DL.)

5:03:09 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2245136 (2245136) = #2245136/498:55.11
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2245136 blocks [F: HL-DT-ST DVDRAM GSA-4084N]
--------------------------------------------------------------

5:03:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: HL-DT-ST DVDRAM GSA-4084N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4598038528, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2245136 | 0 | 0x00
2245136 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

5:03:11 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

5:03:11 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

5:03:11 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

5:03:12 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

5:03:12 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

5:03:12 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)

5:03:12 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:03:12 PM #18 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode for Multisession

5:03:12 PM #19 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes

5:03:12 PM #20 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:03:12 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

5:03:39 PM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x04f13e00: Len xc

5:03:39 PM #23 SPTI -1064 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 10 2A 00 00 0C 21 02
Buffer x09c30080: Len x10000
0x22 00 20 00 00 00 00 00 00 20 00 08 00 00 00 00
0x08 00 6C 08 14 0E 32 28 F0 02 00 00 01 00 00 01
0x01 00 22 00 13 00 00 00 00 00 00 13 00 08 00 00

5:03:39 PM #24 CDR -1064 File Writer.cpp, Line 303
Invalid block address
F: HL-DT-ST DVDRAM GSA-4084N

5:03:39 PM #25 Phase 133 File dlgbrnst.cpp, Line 1762
Writing short lead-out

5:03:40 PM #26 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 31 (1Fh)Close Session/Border, function 2, track: 3, finalize disc: NO, ret: 0

5:03:40 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)

5:03:40 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

5:03:43 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

5:03:43 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

It doesn’t get past 1%. Typically it comes up with the can not complete disc at once error. Help me plz!


#2

Welcome to CD Freaks. :slight_smile:

I suggest trying to lower the write speed [6x or 4x], or switch to a different brand of discs to see if you can get a burn to complete. The general forum consensus is to try Verbatim-branded media, but if you are in an area where you can get 8x media made by Taiyo Yuden, I would strongly suggest trying that. :iagree:


#3

I tried 4x speed, I also have used three different brands. I have HP and Memorex and another one. Nothing seems to work ><.


#4

The HP and Memorex discs may be the same disc model, just under 2 different brands. :wink:

Try writing with ImgBurn, then, and if an error occurs, post the log from that process, please. :slight_smile: