DVD Burn Process Failed - Nero 8

Owner

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.0.3.0
Internal Version: 8, 0, 3, 0
 (Nero Express)
Recorder:             <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 8.0.3.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <MagicISO Virtual DVD-ROM >Version: 1.0A - HA 1 TA 1 - 8.0.3.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : MagicISOVirtual DVD-ROM 1.0A    mcdbus Port 6 ID 0  DMA: Off
CdRomPeripheral      : UH5405S NXL188Z         2.0B  azvptvim Port 8 ID 0  DMA: Off

=== CDRom-Device-Map ===
MagicISO Virtual DVD-ROM   I:   CdRom1
UH5405S NXL188Z            J:   CdRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095492kB)
Free physical memory: 1509MB (1545540kB)
Memory in use       : 26 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

14.6.2009
===== Disc-Copy over image - 1st step : Copy to image  ...

5:10:04 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
5:10:04 PM	#2 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
5:10:04 PM	#3 Text 0 File DVDCopy.cpp, Line 320
	DVD Track-Information from source disc:
	 Media Type: DVD-ROM
	 Last LBA on layer 0 =  1887183 / 0x1CCBCF / 3685MB
	  S01 T01 Con 0x14 Start        0 Len  3771312 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
	
5:10:04 PM	#4 Text 0 File DVDCopy.cpp, Line 435
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  3771312 =  3771312, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
5:10:04 PM	#5 Text 0 File Burncd.cpp, Line 3520
	Turn on Disc-At-Once, using DVD media
	
5:10:04 PM	#6 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  4718591 (1048:34.41, 9215MB)
	Last address to be written:            3771311 (838:04.11, 7365MB)
	
5:10:04 PM	#7 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
5:10:04 PM	#8 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
5:10:04 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 795
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3771312 (3771312) = #3771312/838:4.12
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3771312 blocks [Image Recorder]
	--------------------------------------------------------------
	
5:10:04 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 997
	Prepare [Image Recorder] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    7723646976, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3771312 |  3771312 | 0x00
	  3771312 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
5:10:04 PM	#11 Text 0 File Burncd.cpp, Line 4306
	Caching options: cache CDRom or Network-No, small files-No (<64KB)
	
5:10:04 PM	#12 Phase 120 File dlgbrnst.cpp, Line 1762
	Creating the image for burning
	
5:10:04 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2723
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
5:10:04 PM	#14 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 590400
	
5:27:00 PM	#15 Text 0 File WriterStatus.cpp, Line 113
	******* Recorder> start writing Lead-Out at LBA 3771312 (398BB0h), length 0 blocks
	
5:27:01 PM	#16 Phase 121 File dlgbrnst.cpp, Line 1762
	Creating Image completed successfully
	
5:27:02 PM	#17 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
5:27:09 PM	#18 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
5:27:09 PM	#19 Text 0 File Cdrdrv.cpp, Line 11159
	DriveLocker: UnLockVolume completed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

5:27:10 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
5:27:12 PM	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 7723646976
	CUES:
	LBRK: Last LBA on layer 0 =  1887183 / 0x1CCBCF / 3685MB
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Owner\Documents\TempImage.nrg>
	
5:27:12 PM	#3 Text 0 File Burncd.cpp, Line 3520
	Turn on Disc-At-Once, using DVD media
	
5:48:46 PM	#4 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            3771311 (838:04.11, 7365MB)
	
5:48:46 PM	#5 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
5:48:46 PM	#6 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R9 Double Layer
	 Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
	 Disc Application Code: 0, Extended Information Indicators: 3
	
5:48:46 PM	#7 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
	Not enough free discspace.
		(Medium in drive: DVD-R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
		Data to be written: 7,365 MB (7,723,646,976 bytes)
		Space available on the disc: 4,489 MB (4,707,319,808 bytes)
	
5:48:46 PM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 795
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3771312 (3771312) = #3771312/838:4.12
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3771312 blocks [D: HL-DT-ST DVD-RAM GSA-H55N]
	--------------------------------------------------------------
	
5:48:46 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 997
	Prepare [D: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    7723646976, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3771312 |        0 | 0x00
	  3771312 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
5:48:46 PM	#10 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
5:48:46 PM	#11 Text 0 File Burncd.cpp, Line 4306
	Caching options: cache CDRom or Network-No, small files-No (<64KB)
	
5:48:46 PM	#12 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 8x (11,080 KB/s)
	
5:48:46 PM	#13 Text 0 File ThreadedTransferInterface.cpp, Line 2723
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
5:48:46 PM	#14 SPTI -1066 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x05708f80: Len x648
	
5:48:46 PM	#15 Text 0 File DVDPlusDualLayer.cpp, Line 660
	L0 Data Zone Capacity set to 1887184 (1CCBD0h, 3685MB) -> OK, confirmed setting
	
5:48:46 PM	#16 CDR -1205 File DVDPlusDualLayer.cpp, Line 687
	Burning Layer 1
	
5:48:46 PM	#17 Text 0 File DVDPlusDualLayer.cpp, Line 697
	Start writing layer 1 at address 0 (0h)
	Recording mode: unknown Recording Mode
	
5:48:46 PM	#18 Text 0 File Cdrdrv.cpp, Line 9918
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R DL (14), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 2,    Track Path: Opposite Track Path (OTP),  Layer Type: recordable
	 Linear Density:         0,293 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 22D7FF h (LBN: 1FD7FF h, 4075 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: RITEK...
	  Media type ID: S04
	  Product revision number: 66
	  Number of Physical format information bytes in use in ADIP up to byte 63: 64
	 Media Specific [16..63]:
	    00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40    ...RITEK...S04B@
	    25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14    %%7..,l.,l......
	    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00    ................
	
5:48:46 PM	#19 Text 0 File DVDR.cpp, Line 6525
	Drive: HL-DT-ST DVD-RAM GSA-H55N
	Book Type request [LG]: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
5:48:46 PM	#20 CDR -1207 File DVDR.cpp, Line 6449
	Book Type automatically set to: DVD-ROM
	
5:48:46 PM	#21 SPTI -1066 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x05708f80: Len x648
	
5:48:46 PM	#22 Text 0 File DVDPlusRW.cpp, Line 675
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
5:48:46 PM	#23 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
6:02:28 PM	#24 SPTI -500 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(1167) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0ac00040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:28 PM	#25 SPTI -500 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(1167) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0aa42f80: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:28 PM	#26 Text 0 File MMC.cpp, Line 20149
	Writer-Buffer for ã©„ä  âµŒå‘„åŒ­â”å™„âµ„ä…’âå‡âµã•ˆä¸µ reduced to 32768Bytes
	
6:02:28 PM	#27 SPTI -500 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(1167) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 10 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0aa42f80: Len x8000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:28 PM	#28 CDR -500 File Writer.cpp, Line 312
	SCSI command aborted
	D: HL-DT-ST DVD-RAM GSA-H55N
	
6:02:29 PM	#29 SPTI -500 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(1167) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x35 02 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:29 PM	#30 SPTI -500 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(1167) NeroError(-500)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x5B 01 05 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:29 PM	#31 Phase 127 File dlgbrnst.cpp, Line 1762
	Generating DVD high compatibility borders
	
6:02:29 PM	#32 Text 0 File DVDPlusRW.cpp, Line 935
	EndDAO: Last written address 0
	
6:02:29 PM	#33 SPTI -600 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0aa471c0: Len x804
	
6:02:29 PM	#34 SPTI -600 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0aa471c0: Len x804
	
6:02:29 PM	#35 CDR -500 File WriterStatus.cpp, Line 162
	SCSI command aborted
	D: HL-DT-ST DVD-RAM GSA-H55N
	
6:02:29 PM	#36 TRANSFER -24 File WriterStatus.cpp, Line 162
	Could not perform end of Disc-at-once
	
6:02:29 PM	#37 SPTI -600 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x5A 00 05 00 00 00 00 00 48 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0570a540: Len x48
	
6:02:29 PM	#38 SPTI -600 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x5A 00 05 00 00 00 00 00 48 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0570a700: Len x48
	
6:02:30 PM	#39 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 8x (11,080 KB/s)
	
6:02:30 PM	#40 SPTI -600 File SCSIPassThrough.cpp, Line 181
	CdRom0: SCSIStatus(x00) WinError(55) NeroError(-600)
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	CDB Data:   0x1E 00 00 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
6:02:37 PM	#41 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
6:02:37 PM	#42 Text 0 File Cdrdrv.cpp, Line 11159
	DriveLocker: UnLockVolume completed
	
6:02:37 PM	#43 Text 0 File SCSIPTICommands.cpp, Line 434
	UnLockMCN - completed with error 55 for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:


So what caused this error? Is it a software issue? Is it an issue with the Ritek DL media? Is there something wrong with my LG burner?

It looks like your burner doesn’t like these Ritek disks. You could try updating the firmware of the drive, since yours is not the most recent, but I doubt it will help with these particular DL disks.

The only brand of double layer media consistent enough for us to recommend is Verbatim

And my personal preference when burning to DL media is to use ImgBurn.