DVD Burn Process Failed - Nero 7

The weird part is that it sort of worked the first time I tried to copy the DVD to a dual layer DVD! I could see play the first copy but then it just froze after ten minutes of playing the copy. I tried to copy the DVD twice after that initial attempt and here are the two log files:

User

Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 11:54:32 AM 

NT-SPTI used
Nero Version: 7.5.13.2
Internal Version: 7, 5, 13, 2
 (Nero Express)
Recorder:             <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : MagicISOVirtual DVD-ROM 1.0A    mcdbus Port 6 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N  D:   CDRom0
MagicISO Virtual DVD-ROM   I:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095492kB)
Free physical memory: 1391MB (1424428kB)
Memory in use       : 32 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.1.2009
===== Disc-Copy over image - 1st step : Copy to image  ...

8:04:45 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:04:46 PM	#2 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:04:46 PM	#3 Text 0 File DVDCopy.cpp, Line 319
	DVD Track-Information from source disc:
	 Media Type: DVD-ROM
	 Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	  S01 T01 Con 0x14 Start        0 Len  3922496 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
	
8:04:46 PM	#4 Text 0 File DVDCopy.cpp, Line 434
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  3922496 =  3922496, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
8:04:46 PM	#5 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
8:04:46 PM	#6 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4718591 (1048:34.41, 9215MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
8:04:46 PM	#7 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
8:04:46 PM	#8 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:04:46 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [Image Recorder]
	--------------------------------------------------------------
	
8:04:46 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [Image Recorder] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |  3922496 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |  3922496 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
8:04:46 PM	#11 Phase 120 File dlgbrnst.cpp, Line 1760
	Creating the image for burning
	
8:04:46 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
8:27:17 PM	#13 Text 0 File WriterStatus.cpp, Line 113
	******* Recorder> start writing Lead-Out at LBA 3922496 (3BDA40h), length 0 blocks
	
8:27:18 PM	#14 Phase 121 File dlgbrnst.cpp, Line 1760
	Creating Image completed successfully
	
8:27:19 PM	#15 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:27:25 PM	#16 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:27:25 PM	#17 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

8:27:26 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:27:27 PM	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8033271808
	CUES:
	LBRK: Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Owner\Desktop\VCD.nrg>
	
8:27:27 PM	#3 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
8:28:29 PM	#4 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media: 16383999 (3640:53.24, 31999MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
8:28:29 PM	#5 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
8:28:29 PM	#6 Text 0 File DlgWaitCD.cpp, Line 2929
	Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R
	 Disc Manufacturer ID: , Media Type ID: , Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 0
	
8:28:29 PM	#7 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
	
8:28:29 PM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [D: HL-DT-ST DVD-RAM GSA-H55N]
	--------------------------------------------------------------
	
8:28:29 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [D: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |        0 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
8:28:29 PM	#10 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:28:29 PM	#11 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 12x (16,620 KB/s)
	
8:28:29 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
8:28:29 PM	#13 Text 0 File Cdrdrv.cpp, Line 9261
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-ROM (0), Part Version: 0.9x (0)
	 Disc Size: 120 mm,      Maximum Rate:  2,52 Mbps (0 h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: ?
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 0 h (?)
	 End Physical Sector Number of Data Area:      0 h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	 Media Specific [16..63]:
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
8:28:29 PM	#14 Text 0 File DVDR.cpp, Line 6324
	Drive: HL-DT-ST DVD-RAM GSA-H55N
	Book Type request [LG]: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
8:28:29 PM	#15 CDR -1207 File DVDR.cpp, Line 6247
	Book Type automatically set to: DVD-ROM
	
8:28:29 PM	#16 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x06e11080: Len x648
	
8:28:29 PM	#17 Text 0 File DVDPlusRW.cpp, Line 674
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
8:28:35 PM	#18 SPTI -1122 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x57
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 57 
	Buffer x22030040: Len x10000
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
	
8:28:35 PM	#19 CDR -1122 File Writer.cpp, Line 299
	Unable to recover TOC
	D: HL-DT-ST DVD-RAM GSA-H55N
	
8:28:35 PM	#20 SPTI -1122 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x57
	Sense Qual: 0x00
	CDB Data:   0x5B 01 01 00 00 01 00 00 00 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 57 
	
8:28:35 PM	#21 SPTI -1122 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1122)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x57
	Sense Qual: 0x00
	CDB Data:   0x5B 01 05 00 00 00 00 00 00 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 57 
	
8:28:35 PM	#22 Phase 127 File dlgbrnst.cpp, Line 1760
	Generating DVD high compatibility borders
	
8:28:35 PM	#23 CDR -1122 File WriterStatus.cpp, Line 162
	Unable to recover TOC
	D: HL-DT-ST DVD-RAM GSA-H55N
	
8:28:35 PM	#24 TRANSFER -24 File WriterStatus.cpp, Line 162
	Could not perform end of Disc-at-once
	
8:28:35 PM	#25 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 12x (16,620 KB/s)
	
8:28:35 PM	#26 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
8:28:42 PM	#27 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	
8:28:42 PM	#28 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02/11/2006 1:50:35 AM 

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

-------------------------------------------------------------------------------------------

Second attempt and second log follows:

User



Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 11:54:32 AM 

NT-SPTI used
Nero Version: 7.5.13.2
Internal Version: 7, 5, 13, 2
 (Nero Express)
Recorder:             <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : MagicISOVirtual DVD-ROM 1.0A    mcdbus Port 6 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N  D:   CDRom0
MagicISO Virtual DVD-ROM   I:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095492kB)
Free physical memory: 1633MB (1672504kB)
Memory in use       : 20 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.1.2009
===== Disc-Copy over image - 1st step : Copy to image  ...

8:45:08 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:45:09 PM	#2 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:45:09 PM	#3 Text 0 File DVDCopy.cpp, Line 319
	DVD Track-Information from source disc:
	 Media Type: DVD-ROM
	 Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	  S01 T01 Con 0x14 Start        0 Len  3922496 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
	
8:45:09 PM	#4 Text 0 File DVDCopy.cpp, Line 434
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  3922496 =  3922496, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
8:45:09 PM	#5 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
8:45:09 PM	#6 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4718591 (1048:34.41, 9215MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
8:45:09 PM	#7 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
8:45:09 PM	#8 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:45:09 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [Image Recorder]
	--------------------------------------------------------------
	
8:45:09 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [Image Recorder] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |  3922496 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |  3922496 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
8:45:09 PM	#11 Phase 120 File dlgbrnst.cpp, Line 1760
	Creating the image for burning
	
8:45:09 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:07:41 PM	#13 Text 0 File WriterStatus.cpp, Line 113
	******* Recorder> start writing Lead-Out at LBA 3922496 (3BDA40h), length 0 blocks
	
9:07:41 PM	#14 Phase 121 File dlgbrnst.cpp, Line 1760
	Creating Image completed successfully
	
9:07:43 PM	#15 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:07:49 PM	#16 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:07:49 PM	#17 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

9:07:49 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:07:49 PM	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8033271808
	CUES:
	LBRK: Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Owner\Desktop\VCD.nrg>
	
9:07:49 PM	#3 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
9:10:46 PM	#4 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
9:10:46 PM	#5 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
9:10:46 PM	#6 Text 0 File DlgWaitCD.cpp, Line 2929
	Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R9 Double Layer
	 Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
	 Disc Application Code: 0, Extended Information Indicators: 3
	
9:10:46 PM	#7 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
	Not enough free discspace.
		(Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
		Data to be written: 7,661 MB (8,033,271,808 bytes)
		Space available on the disc: 4,352 MB (4,563,404,800 bytes)
	
9:10:46 PM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [D: HL-DT-ST DVD-RAM GSA-H55N]
	--------------------------------------------------------------
	
9:10:46 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [D: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |        0 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
9:10:46 PM	#10 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
9:10:46 PM	#11 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 8x (11,080 KB/s)
	
9:10:46 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:10:46 PM	#13 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x08e9f440: Len x648
	
9:10:46 PM	#14 Text 0 File DVDPlusDualLayer.cpp, Line 640
	L0 Data Zone Capacity set to 2023856 (1EE1B0h, 3952MB) -> OK, confirmed setting
	
9:10:46 PM	#15 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
	Burning Layer 1
	
9:10:46 PM	#16 Text 0 File DVDPlusDualLayer.cpp, Line 677
	Start writing layer 1 at address 0 (0h)
	Recording mode: unknown Recording Mode
	
9:10:46 PM	#17 Text 0 File Cdrdrv.cpp, Line 9261
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R DL (14), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 2,    Track Path: Opposite Track Path (OTP),  Layer Type: recordable
	 Linear Density:         0,293 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      FCFFFF h
	 End Sector Number in Layer 0:                 22D7FF h (LBN: 1FD7FF h, 4075 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: RITEK...
	  Media type ID: S04
	  Product revision number: 66
	  Number of Physical format information bytes in use in ADIP up to byte 63: 64
	 Media Specific [16..63]:
	    00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40    ...RITEK...S04B@
	    25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14    %%7..,l.,l......
	    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00    ................
	
9:10:46 PM	#18 Text 0 File DVDR.cpp, Line 6324
	Drive: HL-DT-ST DVD-RAM GSA-H55N
	Book Type request [LG]: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
9:10:46 PM	#19 CDR -1207 File DVDR.cpp, Line 6247
	Book Type automatically set to: DVD-ROM
	
9:10:46 PM	#20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x08e9f440: Len x648
	
9:10:46 PM	#21 Text 0 File DVDPlusRW.cpp, Line 674
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
9:12:45 PM	#22 SPTI -1119 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x03
	CDB Data:   0x2A 00 00 02 7B 60 00 00 20 00 00 00 
	Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09 03 
	Buffer x25e2f800: Len x10000
	0x00 00 01 BA 44 0F 6E 96 EC D5 01 89 C3 F8 00 00 
	0x01 E0 07 EC 81 00 00 18 03 62 58 42 4B 1B FB 37 
	0x29 51 67 E1 9B 17 8A E0 14 24 B1 80 39 25 50 E0 
	
9:12:45 PM	#23 CDR -1119 File Writer.cpp, Line 299
	Track following error
	D: HL-DT-ST DVD-RAM GSA-H55N
	
9:12:45 PM	#24 Phase 127 File dlgbrnst.cpp, Line 1760
	Generating DVD high compatibility borders
	
9:12:45 PM	#25 Phase 129 File dlgbrnst.cpp, Line 1760
	Generating DVD borders completed successfully
	
9:12:45 PM	#26 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 8x (11,080 KB/s)
	
9:12:45 PM	#27 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:12:52 PM	#28 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	
9:12:52 PM	#29 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02/11/2006 1:50:35 AM 

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

It seems your burner is having trouble with the RITEK media. Try some Verbatim. You could try to burn the RITEK at 4x it might help.

Hi garyoak99:

When it comes to DL media, the only one consistently recommended is Verbatim and your log shows you are using Ritek.

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

9:10:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
Disc Application Code: 0, Extended Information Indicators: 3

9:10:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<

Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
Not enough free discspace.
(Medium in drive: DVD+R. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
Data to be written: 7,661 MB (8,033,271,808 bytes)
Space available on the disc: 4,352 MB (4,563,404,800 bytes)

Strange?

Drag & drop the files from the disc to your hard drive & burn with ImgBurn, If that fails post an ImgBurn Log.

http://forum.digital-digest.com/showthread.php?t=86742

[QUOTE=~Jethro~;2204128]You could try to burn the RITEK at 4x it might help.[/QUOTE]

Here is the log file of another attempt at the RITEK media but at 4x this time.


Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 11:54:32 AM 

NT-SPTI used
Nero Version: 7.5.13.2
Internal Version: 7, 5, 13, 2
 (Nero Express)
Recorder:             <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : MagicISOVirtual DVD-ROM 1.0A    mcdbus Port 6 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N  D:   CDRom0
MagicISO Virtual DVD-ROM   I:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095492kB)
Free physical memory: 1464MB (1499476kB)
Memory in use       : 28 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

24.1.2009
===== Disc-Copy over image - 1st step : Copy to image  ...

8:44:47 AM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:44:48 AM	#2 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:44:48 AM	#3 Text 0 File DVDCopy.cpp, Line 319
	DVD Track-Information from source disc:
	 Media Type: DVD+R DL
	 Last LBA on layer 0 =  1994751 / 0x1E6FFF / 3895MB
	  S01 T01 Con 0x14 Start        0 Len  3989264 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
	
8:44:48 AM	#4 Text 0 File DVDCopy.cpp, Line 434
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  3989264 =  3989264, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
8:44:48 AM	#5 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
8:44:48 AM	#6 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4718591 (1048:34.41, 9215MB)
	Last address to be written:            3989263 (886:30.13, 7791MB)
	
8:44:48 AM	#7 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
8:44:48 AM	#8 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:44:48 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3989264 (3989264) = #3989264/886:30.14
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3989264 blocks [Image Recorder]
	--------------------------------------------------------------
	
8:44:48 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [Image Recorder] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8170012672, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3989264 |  3989264 | 0x00
	        0 |        1 |   1 |    0x41 |  3989264 |  3989264 | 0x00
	  3989264 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
8:44:48 AM	#11 Phase 120 File dlgbrnst.cpp, Line 1760
	Creating the image for burning
	
8:44:48 AM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:02:16 AM	#13 Text 0 File WriterStatus.cpp, Line 113
	******* Recorder> start writing Lead-Out at LBA 3989264 (3CDF10h), length 0 blocks
	
9:02:17 AM	#14 Phase 121 File dlgbrnst.cpp, Line 1760
	Creating Image completed successfully
	
9:02:19 AM	#15 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:02:26 AM	#16 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:02:26 AM	#17 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

9:02:26 AM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:02:26 AM	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8170012672
	CUES:
	LBRK: Last LBA on layer 0 =  1994751 / 0x1E6FFF / 3895MB
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Owner\Desktop\VCD.nrg>
	
9:02:26 AM	#3 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
9:03:33 AM	#4 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            3989263 (886:30.13, 7791MB)
	
9:03:33 AM	#5 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
9:03:33 AM	#6 Text 0 File DlgWaitCD.cpp, Line 2929
	Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R9 Double Layer
	 Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
	 Disc Application Code: 0, Extended Information Indicators: 3
	
9:03:33 AM	#7 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
	
9:03:33 AM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3989264 (3989264) = #3989264/886:30.14
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3989264 blocks [D: HL-DT-ST DVD-RAM GSA-H55N]
	--------------------------------------------------------------
	
9:03:33 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [D: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8170012672, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3989264 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3989264 |        0 | 0x00
	  3989264 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
9:03:33 AM	#10 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
9:03:33 AM	#11 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 4x (5,540 KB/s)
	
9:03:33 AM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:03:33 AM	#13 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x06340100: Len x648
	
9:03:33 AM	#14 Text 0 File DVDPlusDualLayer.cpp, Line 640
	L0 Data Zone Capacity set to 1994752 (1E7000h, 3896MB) -> OK, confirmed setting
	
9:03:33 AM	#15 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
	Burning Layer 1
	
9:03:33 AM	#16 Text 0 File DVDPlusDualLayer.cpp, Line 677
	Start writing layer 1 at address 0 (0h)
	Recording mode: unknown Recording Mode
	
9:03:33 AM	#17 Text 0 File Cdrdrv.cpp, Line 9261
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R DL (14), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 2,    Track Path: Opposite Track Path (OTP),  Layer Type: recordable
	 Linear Density:         0,293 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      FCFFFF h
	 End Sector Number in Layer 0:                 22D7FF h (LBN: 1FD7FF h, 4075 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: RITEK...
	  Media type ID: S04
	  Product revision number: 66
	  Number of Physical format information bytes in use in ADIP up to byte 63: 64
	 Media Specific [16..63]:
	    00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40    ...RITEK...S04B@
	    25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14    %%7..,l.,l......
	    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00    ................
	
9:03:33 AM	#18 Text 0 File DVDR.cpp, Line 6324
	Drive: HL-DT-ST DVD-RAM GSA-H55N
	Book Type request [LG]: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
9:03:33 AM	#19 CDR -1207 File DVDR.cpp, Line 6247
	Book Type automatically set to: DVD-ROM
	
9:03:33 AM	#20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x0637a4c0: Len x648
	
9:03:33 AM	#21 Text 0 File DVDPlusRW.cpp, Line 674
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
9:12:55 AM	#22 SPTI -1093 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x02
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 15 59 00 00 00 20 00 00 00 
	Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02 
	Buffer x09a14340: Len x10000
	0x00 00 01 BA 44 0E 67 35 FD 57 01 89 C3 F8 00 00 
	0x01 E0 07 EC 81 00 00 69 D8 08 10 40 06 55 19 A0 
	0x86 06 73 F0 35 38 1F 8B C4 AD 9B 01 C8 B5 79 18 
	
9:12:55 AM	#23 CDR -1093 File Writer.cpp, Line 299
	No seek complete
	D: HL-DT-ST DVD-RAM GSA-H55N
	
9:12:56 AM	#24 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 4x (5,540 KB/s)
	
9:12:56 AM	#25 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:13:03 AM	#26 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	
9:13:03 AM	#27 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02/11/2006 1:50:35 AM 

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 


Does this mean the only viable solution is to purchase Verbatim media now?

With this particular burner, I’d say yes, it is time to switch to Verbatim if you want to burn DL media.

Skip the crap Riteks.

[QUOTE=jeff53404;2204129]Hi garyoak99:

When it comes to DL media, the only one consistently recommended is Verbatim and your log shows you are using Ritek.

Sense Key: 0x03 (KEY_MEDIUM_ERROR)[/QUOTE]

The weird part is that I tried to burn using the RITEK media again and it WORKED!!!

The funny part is that when I tried to do it again; it failed showing me the familiar Key Medium error so I tried yet again and it gave me a different error this time:



Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 11:54:32 AM 

NT-SPTI used
Nero Version: 7.5.13.2
Internal Version: 7, 5, 13, 2
 (Nero Express)
Recorder:             <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <HL-DT-ST DVD-RAM GSA-H55N>Version: 1.00 - HA 1 TA 0 - 7.5.13.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : MagicISOVirtual DVD-ROM 1.0A    mcdbus Port 6 ID 0  DMA: Off
CdRomPeripheral      : UH5405S NXL188Z         2.0B  avjam6s3 Port 8 ID 0  DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H55N  D:   CDRom0
MagicISO Virtual DVD-ROM   I:   CDRom1
UH5405S NXL188Z            J:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2046MB (2095492kB)
Free physical memory: 1484MB (1519696kB)
Memory in use       : 27 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

13.2.2009
===== Disc-Copy over image - 1st step : Copy to image  ...

8:54:47 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
8:54:47 PM	#2 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
8:54:47 PM	#3 Text 0 File DVDCopy.cpp, Line 319
	DVD Track-Information from source disc:
	 Media Type: DVD-ROM
	 Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	  S01 T01 Con 0x14 Start        0 Len  3922496 NWA       -1 (gap     0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
	
8:54:47 PM	#4 Text 0 File DVDCopy.cpp, Line 434
	Max -1 tracks of 1 allowed to copy
	 1:        0 -  3922496 =  3922496, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
	
8:54:47 PM	#5 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
8:54:47 PM	#6 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4718591 (1048:34.41, 9215MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
8:54:47 PM	#7 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
8:54:47 PM	#8 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
8:54:47 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - Data (mode 1))
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [Image Recorder]
	--------------------------------------------------------------
	
8:54:47 PM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [Image Recorder] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |  3922496 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |  3922496 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
8:54:47 PM	#11 Phase 120 File dlgbrnst.cpp, Line 1760
	Creating the image for burning
	
8:54:47 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:11:51 PM	#13 Text 0 File WriterStatus.cpp, Line 113
	******* Recorder> start writing Lead-Out at LBA 3922496 (3BDA40h), length 0 blocks
	
9:11:51 PM	#14 Phase 121 File dlgbrnst.cpp, Line 1760
	Creating Image completed successfully
	
9:11:52 PM	#15 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:11:59 PM	#16 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:11:59 PM	#17 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	


===== Disc-Copy over image - 2nd step : Burn the image ...

9:11:59 PM	#1 Text 0 File SCSIPTICommands.cpp, Line 411
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
9:12:00 PM	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x40
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8033271808
	CUES:
	LBRK: Last LBA on layer 0 =  2023855 / 0x1EE1AF / 3952MB
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Owner\Desktop\MVC2.nrg>
	
9:12:00 PM	#3 Text 0 File Burncd.cpp, Line 3471
	Turn on Disc-At-Once, using DVD media
	
9:19:04 PM	#4 Text 0 File DlgWaitCD.cpp, Line 306
	Last possible write address on media:  4173823 (927:30.73, 8151MB)
	Last address to be written:            3922495 (871:39.70, 7661MB)
	
9:19:04 PM	#5 Text 0 File DlgWaitCD.cpp, Line 318
	Write in overburning mode: NO (enabled: CD)
	
9:19:04 PM	#6 Text 0 File DlgWaitCD.cpp, Line 2929
	Recorder: HL-DT-ST DVD-RAM GSA-H55N, Media type: DVD+R9 Double Layer
	 Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66
	 Disc Application Code: 0, Extended Information Indicators: 3
	
9:19:04 PM	#7 Text 0 File DlgWaitCD.cpp, Line 490
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)
	
9:19:04 PM	#8 Text 0 File ThreadedTransferInterface.cpp, Line 792
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 3922496 (3922496) = #3922496/871:39.71
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3922496 blocks [D: HL-DT-ST DVD-RAM GSA-H55N]
	--------------------------------------------------------------
	
9:19:04 PM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [D: HL-DT-ST DVD-RAM GSA-H55N] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x40; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    8033271808, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |  3922496 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  3922496 |        0 | 0x00
	  3922496 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
9:19:04 PM	#10 Text 0 File SCSIPTICommands.cpp, Line 209
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
9:19:04 PM	#11 Phase 36 File dlgbrnst.cpp, Line 1760
	Burn process started at 4x (5,540 KB/s)
	
9:19:05 PM	#12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
9:19:05 PM	#13 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x08e0a3c0: Len x648
	
9:19:05 PM	#14 Text 0 File DVDPlusDualLayer.cpp, Line 640
	L0 Data Zone Capacity set to 2023856 (1EE1B0h, 3952MB) -> OK, confirmed setting
	
9:19:05 PM	#15 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
	Burning Layer 1
	
9:19:05 PM	#16 Text 0 File DVDPlusDualLayer.cpp, Line 677
	Start writing layer 1 at address 0 (0h)
	Recording mode: unknown Recording Mode
	
9:19:05 PM	#17 Text 0 File Cdrdrv.cpp, Line 9261
	---- DVD Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R DL (14), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 2,    Track Path: Opposite Track Path (OTP),  Layer Type: recordable
	 Linear Density:         0,293 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      FCFFFF h
	 End Sector Number in Layer 0:                 22D7FF h (LBN: 1FD7FF h, 4075 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 3 h
	  Disc Manufacturer ID: RITEK...
	  Media type ID: S04
	  Product revision number: 66
	  Number of Physical format information bytes in use in ADIP up to byte 63: 64
	 Media Specific [16..63]:
	    00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40    ...RITEK...S04B@
	    25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14    %%7..,l.,l......
	    02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00    ................
	
9:19:05 PM	#18 Text 0 File DVDR.cpp, Line 6324
	Drive: HL-DT-ST DVD-RAM GSA-H55N
	Book Type request [LG]: DVD-ROM
	Changing the Book Type was finished successfully, return code 0
	
9:19:05 PM	#19 CDR -1207 File DVDR.cpp, Line 6247
	Book Type automatically set to: DVD-ROM
	
9:19:05 PM	#20 SPTI -1066 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x04e78d80: Len x648
	
9:19:05 PM	#21 Text 0 File DVDPlusRW.cpp, Line 674
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
9:24:23 PM	#22 SPTI -1119 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
	Sense Key:  0x04 (KEY_HARDWARE_ERROR)
	Sense Code: 0x09
	Sense Qual: 0x03
	CDB Data:   0x2A 00 00 0B 2C A0 00 00 20 00 00 00 
	Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09 03 
	Buffer x0f1f2200: Len x10000
	0x00 00 01 BA 44 71 0F F8 1C 7F 01 89 C3 F8 00 00 
	0x01 E0 07 EC 81 00 00 08 08 60 54 06 00 18 80 E8 
	0x0A 06 80 98 04 20 64 94 01 40 05 44 34 A0 21 24 
	
9:24:23 PM	#23 CDR -1119 File Writer.cpp, Line 299
	Track following error
	D: HL-DT-ST DVD-RAM GSA-H55N
	
9:24:23 PM	#24 Phase 38 File dlgbrnst.cpp, Line 1760
	Burn process failed at 4x (5,540 KB/s)
	
9:24:23 PM	#25 Text 0 File SCSIPTICommands.cpp, Line 254
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
9:24:30 PM	#26 Text 0 File Cdrdrv.cpp, Line 10538
	DriveLocker: UnLockVolume completed
	
9:24:30 PM	#27 Text 0 File SCSIPTICommands.cpp, Line 411
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 02/11/2006 1:50:35 AM 

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 


What does this error mean? :confused:

Even if the burn completed, it doesn’t mean it burned well with that particular media and this drive.

Your Nero logs aren’t showing DMA status of this LG burner. Follow this guide to make sure DMA is enabled for your drive: http://club.cdfreaks.com/f61/troubleshooting-enabling-checking-dma-windows-vista-xp-2000-me-9x-101616/
Make sure Current Transfer Mode is in Ultra DMA.

[QUOTE=Kerry56;2219191]Even if the burn completed, it doesn’t mean it burned well with that particular media and this drive.

Your Nero logs aren’t showing DMA status of this LG burner. Follow this guide to make sure DMA is enabled for your drive: http://club.cdfreaks.com/f61/troubleshooting-enabling-checking-dma-windows-vista-xp-2000-me-9x-101616/
Make sure Current Transfer Mode is in Ultra DMA.[/QUOTE]

The one completely successful burn with the RITEK DVD-DL worked just fine on the DVD player with my old TV. It also played perfectly on ALL of the DVD’s chapters unlike my first semi-successful attempt.

I just checked; two of my IDE Channels show the Enable DMA boxes as checked with current modes being Ultra DMA mode 5 and Ultra DMA mode 4.

Well, its good your drive is in Ultra DMA mode. But these failures when burning Ritek DL should be a huge warning flag for you. And just because the disk that actually burned is playing now, doesn’t mean it is a good burn, or that it will continue to play well in six months, or a year from now.