DVD burn errors

vbimport

#1

Setup:
AMD Athlon 1100
Biostar MoBo with VIA chips
Pri IDE channel: 80GB HD --> CD-ROM
Sec IDE channel: NuTech 082 DVDBurner --> 40GB HD
XP SP1
300W PoS

Bought the NuTech 2 weeks ago and installed with OEM Nero Express 6
Bought spindle of Gen DVD-R’s and burned 1 functioning movie very first one.

After that I got into trouble with the burn freezing the entire system at 50%.
5-6 coasters there. Bought TDK +R media, same thing happened.

Upgraded to Nero Burning Rom 6.1.3.17, no change, uninstalled same and installed BlindWrite. Same problem. Uninstalled BW and reinstalled Nero…17.

Upgraded VIA drivers, changed DMA settings to handle UDMA in the BIOS, did the DMA reghack on XP, and also ran VIA’s idetool to change over to UDMA on all that it applied to.

As soon as the DMA stuff was sorted out ran into a weird situation where the
caching of files would slowly hang the system one proggie at a time.
Went through the uninstall of Nero, installed NTI, reinstalled Nero.
Update ASPI layers. ForeceASPI 1.7.
Still hung everything during caching of files on beginning of burn in several diff proggies, both - and + media.

Reverted BIOS back to PIO on all channels.
Burned one multisession with generic -R media and it WORKED!.
Tried to burn another session and finalize the DVD and it froze up on finalizing.

Did the uninstall-reinstall thing. 5 coasters of both medias later it freezes every time I try to burn between 50% and finalization.

All through this CD-r’s have been and are burning just fine.

Any suggestions would be GREAT!!!

====== *** Nero-Burning Rom, History File *** ======

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File ‘C:\Program Files\cdrom\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.17
Recorder: <NU DVDRW DDW-082> Version: B375 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <viadsk> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA CD-ROM XM-6202B >Version: 1110 - HA 0 TA 1 - 6.3.1.17
Adapter driver: <viadsk> HA 0

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0802N TK10 viadsk Port 0 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA CD-ROM XM-6202B 1110 viadsk Port 0 ID 1 DMA: Off
CdRomPeripheral : NU DVDRW DDW-082 B375 viadsk Port 1 ID 0 DMA: Off
DiskPeripheral : WDC WD307AA 05.0 viadsk Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA CD-ROM XM-6202B F: CDRom3
NU DVDRW DDW-082 J: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 194MB (199268kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.7.2004
ISO compilation
8:29:47 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:29:48 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

8:29:48 PM #3 Text 0 File Writer.cpp, Line 124
Writer NU DVDRW DDW-082 running

8:29:48 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

8:29:48 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media

8:29:49 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 32655 ( 7:15.30, 63MB)

8:29:49 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)

8:29:49 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: NU DVDRW DDW-082, Media type: DVD-R
Disc Manufacturer: AN31 -
Disc Application Code: 64, Disc Physical Code: 193

8:29:49 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:29:49 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 32656 (32656) = #32656/7:15.31
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 32656 blocks [NU DVDRW DDW-082 ]
--------------------------------------------------------------

8:29:49 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [NU DVDRW DDW-082 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 66879488, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
32656 | lead-out | 1 | 0x00 | 0x41

8:29:49 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started

8:29:50 PM #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

8:29:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed

8:29:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 4x (5,540 KB/s)

8:29:50 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:29:50 PM #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 3:17,335 (197335ms) -> OK

8:29:50 PM #18 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode

8:29:50 PM #19 Text 0 File Mmc.cpp, Line 20401
Set BUFE: Seamless Link -> ON

8:29:50 PM #20 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes

8:29:50 PM #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 15 EA 90 00 16 7E 30 - 00 00 00 00 00 00 00 00 …~0…
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

8:29:50 PM #22 Text 0 File DVDR.cpp, Line 4582
Drive: NU DVDRW DDW-082
Book Type request: DVD-ROM, write to EEPROM
Changing the book type was finish with error code: 0

8:30:44 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03E33000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x14 0x30 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00

8:30:44 PM #24 CDR -1135 File Writer.cpp, Line 304
Write error

8:30:44 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

8:30:44 PM #26 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 5167

8:30:44 PM #27 Text 0 File DVDR.cpp, Line 4582
Drive: NU DVDRW DDW-082
Book Type request: DVD-R, write to EEPROM
Changing the book type was finish with error code: 0

8:30:44 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

8:30:44 PM #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

8:30:44 PM #30 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File ‘Drivers\viadsk.sys’: Ver=5.1.2600.320, size=56576 bytes, created 6/19/2003 6:00:00 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

I have similar problems with Verbatim and Ricoh DVD+.
Nero will stop before something is burned. I can’t burn any DVD’s, just normal CD’s work

maybe our direcs are broken :frowning:


#3

You have multipel problems… DMA not working because the drive is having probs… Could be because the HD connected to it… Maybe bad media which locks up when the drive goes to recalibrate and find media is destroyed already… Maybe get RW media to test…

>>All through this CD-r’s have been and are burning just fine. <<

??? hmmm so its not DMA??? Then its media problem???

Went through this stuff but in the end I removed all cards from the system, installed WINXP again to a blank hard disk IE not an upgrade or repair but a brand new fresh one… Still got burn problems but at least no random lock up’s and weird stuff… It still aborts with certain media when it tries to change write speed…

You could also try lowering the write speed instead of max write speed so it writes to the media better. If I want workig DVD’s I have to do it @ 2x… Great burns there too… just takes 30 minutes heh.