Dual Layer Burning Not Working (NEC ND-6650A)

vbimport

#1

[qanda]This thread is about the NEC ND-6650A. Click here to see full specs[/qanda]Hello - So i have had this issue for a little while (it appeared suddenly) and it is continuing, even after I reformatted my computer!

When I try to back up a dvd - I am able to if I am doing a single layer DVD±R. When I attempt to do a larger dvd on a Dual layer (I am currently using memorex or sony) it fails about halfway through the burning process. I have tried two programs - 1 Click DVD Copy, and DVDFab Platinum - and both stop at approximately 50% to say that there was an error - and that burning failed. I used to be able to burn DL consistently.

This is the case for multiple different movies that I am attempting to back up. I am using the original DVD burner in my computer - NEC ND 6650A. I have the driver 5.1.2535 - which I believe is updated, and I have the firmware from Dell of 103D. It used to burn DVD + or - R, and DVD + or - R,DL. But now it will read all of them, but wont burn the DL.

I have wasted SO many dual layer dvd’s testing this problem again and again, so if anyone has any advice or solutions i would greatly appreciate it. Thanks!


#2

Verbatim DL is the only DL media consitently recommended by forum members.


#3

[QUOTE=jeff53404;2179505]Verbatim DL is the only DL media consitently recommended by forum members.[/QUOTE]:iagree:

Please post a couple of burn logs from the failed attempts with Fab.

The default location is:
[B]C:\Documents and Settings[I]Administrator Name[/I]\My Documents\DVDFab\Log[/B]


#4

Well I guess I will have to try those DL dvd’s. Thanks for the tip!

Here is the last log file from DVDFab.

12/18/2008 6:36:53 PM info ******************** Report session closed *********************
12/18/2008 6:33:11 PM error WRITE FAILED: write error occured at 197.4% of the write
12/18/2008 6:33:10 PM error Write error at 1969936 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
12/18/2008 6:12:36 PM info Lead-in burning time (mS) 560
12/18/2008 6:12:36 PM info Write started 3889328 sectors to write
12/18/2008 6:12:36 PM info Layer change set to LBA 1969120 (3.76 Gb.)
12/18/2008 6:12:04 PM info Writing speed requested x2.4, effective x2.0
12/18/2008 6:12:04 PM info layer break set by filesystem builder at 1969120
12/18/2008 6:12:04 PM info Available write speed: 2.4x
12/18/2008 6:12:04 PM info Media ID: RITEK-S04-42
12/18/2008 6:12:04 PM info Media type: Dual Layer DVD+R
12/18/2008 6:12:04 PM info Ultra DMA mode 2 (ATA33)
12/18/2008 6:12:02 PM info Optimal Layer Break is in cell 15, around 01:26:00
12/18/2008 6:12:01 PM info Scanned files #29, folder #2 - total size 7964192768 b. (7.42 Gb.)
12/18/2008 6:12:01 PM info Inserted media type : DL DVD+R
12/18/2008 6:12:01 PM info Write started
12/18/2008 6:11:58 PM info New media (DL DVD+R) inserted. Burning layer is ready to write
12/18/2008 6:11:57 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
12/18/2008 6:11:57 PM info Drive has IDE-ATAPI physical interface
12/18/2008 6:11:57 PM info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/18/2008 6:11:16 PM info New media (DL DVD+R) inserted. Burning layer is ready to write
12/18/2008 6:11:14 PM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/18/2008 6:11:14 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/18/2008 6:11:13 PM info User default language : 1033 (0x0409h) - English (United States)
12/18/2008 6:11:13 PM info System default language : 1033 (0x0409h) - English (United States)
12/18/2008 6:11:13 PM info DLL Version 5, 0, 8, 5
12/18/2008 6:11:13 PM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/18/2008 6:11:13 PM info Version 5, 0, 8, 5
12/18/2008 6:11:13 PM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/18/2008 6:11:13 PM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/18/2008 6:11:13 PM info ******************** Report session started ********************

12/18/2008 6:33:11 PM error WRITE FAILED: write error occured at 197.4% of the write
12/18/2008 6:33:10 PM error Write error at 1969936 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
12/18/2008 6:12:36 PM info Lead-in burning time (mS) 560
12/18/2008 6:12:36 PM info Write started 3889328 sectors to write
12/18/2008 6:12:36 PM info Layer change set to LBA 1969120 (3.76 Gb.)
12/18/2008 6:12:04 PM info Writing speed requested x2.4, effective x2.0
12/18/2008 6:12:04 PM info layer break set by filesystem builder at 1969120
12/18/2008 6:12:04 PM info Available write speed: 2.4x
12/18/2008 6:12:04 PM info Media ID: RITEK-S04-42
12/18/2008 6:12:04 PM info Media type: Dual Layer DVD+R
12/18/2008 6:12:04 PM info Ultra DMA mode 2 (ATA33)
12/18/2008 6:12:02 PM info Optimal Layer Break is in cell 15, around 01:26:00
12/18/2008 6:12:01 PM info Scanned files #29, folder #2 - total size 7964192768 b. (7.42 Gb.)
12/18/2008 6:12:01 PM info Inserted media type : DL DVD+R
12/18/2008 6:12:01 PM info Write started
12/18/2008 6:11:58 PM info New media (DL DVD+R) inserted. Burning layer is ready to write
12/18/2008 6:11:57 PM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
12/18/2008 6:11:57 PM info Drive has IDE-ATAPI physical interface
12/18/2008 6:11:57 PM info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/18/2008 6:11:16 PM info New media (DL DVD+R) inserted. Burning layer is ready to write
12/18/2008 6:11:14 PM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/18/2008 6:11:14 PM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/18/2008 6:11:13 PM info User default language : 1033 (0x0409h) - English (United States)
12/18/2008 6:11:13 PM info System default language : 1033 (0x0409h) - English (United States)
12/18/2008 6:11:13 PM info DLL Version 5, 0, 8, 5
12/18/2008 6:11:13 PM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/18/2008 6:11:13 PM info Version 5, 0, 8, 5
12/18/2008 6:11:13 PM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/18/2008 6:11:13 PM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/18/2008 6:11:13 PM info ******************** Report session started ********************

12/10/2008 10:55:26 AM info ******************** Report session closed *********************
12/10/2008 10:51:54 AM info WRITE SUCCESS: Disc written
12/10/2008 10:51:54 AM info Finalization Time 00:00:41 - Total completion time 00:12:55
12/10/2008 10:51:13 AM info Write finished in 00:12:13 - Finalization start here. Avg. burn rate 4.69
12/10/2008 10:39:23 AM info Lead-in burning time (mS) 605
12/10/2008 10:38:59 AM info Write started 2116144 sectors to write
12/10/2008 10:38:59 AM info Writing speed requested x8.0, effective x2.4
12/10/2008 10:38:59 AM info Available write speed: 8x, 6x, 4x, 2.4x
12/10/2008 10:38:59 AM info Media ID: SONY-D11-00
12/10/2008 10:38:59 AM info Media type: DVD+R
12/10/2008 10:38:59 AM info Ultra DMA mode 2 (ATA33)
12/10/2008 10:38:57 AM info Scanned files #47, folder #2 - total size 4332664832 b. (4.04 Gb.)
12/10/2008 10:38:57 AM info Inserted media type : DVD+R
12/10/2008 10:38:57 AM info Write started
12/10/2008 10:38:33 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:37:29 AM info WRITE SUCCESS: Disc written
12/10/2008 10:37:29 AM info Finalization Time 00:00:44 - Total completion time 00:22:44
12/10/2008 10:36:44 AM info Write finished in 00:22:00 - Finalization start here. Avg. burn rate 2.61
12/10/2008 10:15:12 AM info Lead-in burning time (mS) 604
12/10/2008 10:14:44 AM info Write started 2117984 sectors to write
12/10/2008 10:14:44 AM info Writing speed requested x8.0, effective x2.4
12/10/2008 10:14:44 AM info Available write speed: 8x, 6x, 4x, 2.4x
12/10/2008 10:14:44 AM info Media ID: SONY-D11-00
12/10/2008 10:14:44 AM info Media type: DVD+R
12/10/2008 10:14:44 AM info Ultra DMA mode 2 (ATA33)
12/10/2008 10:14:41 AM info Scanned files #26, folder #2 - total size 4336486400 b. (4.04 Gb.)
12/10/2008 10:14:41 AM info Inserted media type : DVD+R
12/10/2008 10:14:40 AM info Write started
12/10/2008 10:14:35 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:14:34 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
12/10/2008 10:14:34 AM info Drive has IDE-ATAPI physical interface
12/10/2008 10:14:34 AM info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:14:01 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:13:58 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:13:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:13:58 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:58 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:58 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:13:58 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:13:58 AM info Version 5, 0, 8, 5
12/10/2008 10:13:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:13:58 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:13:58 AM info ******************** Report session started ********************

12/10/2008 10:51:54 AM info WRITE SUCCESS: Disc written
12/10/2008 10:51:54 AM info Finalization Time 00:00:41 - Total completion time 00:12:55
12/10/2008 10:51:13 AM info Write finished in 00:12:13 - Finalization start here. Avg. burn rate 4.69
12/10/2008 10:39:23 AM info Lead-in burning time (mS) 605
12/10/2008 10:38:59 AM info Write started 2116144 sectors to write
12/10/2008 10:38:59 AM info Writing speed requested x8.0, effective x2.4
12/10/2008 10:38:59 AM info Available write speed: 8x, 6x, 4x, 2.4x
12/10/2008 10:38:59 AM info Media ID: SONY-D11-00
12/10/2008 10:38:59 AM info Media type: DVD+R
12/10/2008 10:38:59 AM info Ultra DMA mode 2 (ATA33)
12/10/2008 10:38:57 AM info Scanned files #47, folder #2 - total size 4332664832 b. (4.04 Gb.)
12/10/2008 10:38:57 AM info Inserted media type : DVD+R
12/10/2008 10:38:57 AM info Write started
12/10/2008 10:38:33 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:37:29 AM info WRITE SUCCESS: Disc written
12/10/2008 10:37:29 AM info Finalization Time 00:00:44 - Total completion time 00:22:44
12/10/2008 10:36:44 AM info Write finished in 00:22:00 - Finalization start here. Avg. burn rate 2.61
12/10/2008 10:15:12 AM info Lead-in burning time (mS) 604
12/10/2008 10:14:44 AM info Write started 2117984 sectors to write
12/10/2008 10:14:44 AM info Writing speed requested x8.0, effective x2.4
12/10/2008 10:14:44 AM info Available write speed: 8x, 6x, 4x, 2.4x
12/10/2008 10:14:44 AM info Media ID: SONY-D11-00
12/10/2008 10:14:44 AM info Media type: DVD+R
12/10/2008 10:14:44 AM info Ultra DMA mode 2 (ATA33)
12/10/2008 10:14:41 AM info Scanned files #26, folder #2 - total size 4336486400 b. (4.04 Gb.)
12/10/2008 10:14:41 AM info Inserted media type : DVD+R
12/10/2008 10:14:40 AM info Write started
12/10/2008 10:14:35 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:14:34 AM info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
12/10/2008 10:14:34 AM info Drive has IDE-ATAPI physical interface
12/10/2008 10:14:34 AM info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:14:01 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:13:58 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:13:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:13:58 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:58 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:58 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:13:58 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:13:58 AM info Version 5, 0, 8, 5
12/10/2008 10:13:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:13:58 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:13:58 AM info ******************** Report session started ********************

12/10/2008 10:13:31 AM info ******************** Report session closed *********************
12/10/2008 10:13:28 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:13:28 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:13:28 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:28 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:28 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:13:28 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:13:28 AM info Version 5, 0, 8, 5
12/10/2008 10:13:28 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:13:28 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:13:28 AM info ******************** Report session started ********************

12/10/2008 10:13:28 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:13:28 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:13:28 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:28 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:13:28 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:13:28 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:13:28 AM info Version 5, 0, 8, 5
12/10/2008 10:13:28 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:13:28 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:13:28 AM info ******************** Report session started ********************

12/10/2008 10:12:55 AM info ******************** Report session closed *********************
12/10/2008 10:12:51 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:12:48 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:12:48 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:12:48 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:12:48 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:12:48 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:12:48 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:12:48 AM info Version 5, 0, 8, 5
12/10/2008 10:12:48 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:12:48 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:12:48 AM info ******************** Report session started ********************

12/10/2008 10:12:51 AM info New media (DVD+R) inserted. Burning layer is ready to write
12/10/2008 10:12:48 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/10/2008 10:12:48 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/10/2008 10:12:48 AM info User default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:12:48 AM info System default language : 1033 (0x0409h) - English (United States)
12/10/2008 10:12:48 AM info DLL Version 5, 0, 8, 5
12/10/2008 10:12:48 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/10/2008 10:12:48 AM info Version 5, 0, 8, 5
12/10/2008 10:12:48 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/10/2008 10:12:48 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/10/2008 10:12:48 AM info ******************** Report session started ********************

Does the ‘Cd-Burner is dirty’ really mean that? Because I can burn cd’s and SL dvd’s just fine…

Thanks again!!!


#5

What you need to do is upgrade dvdfab to the latest and you can find that here on the dvdfab sub-forum. The update might work for your problem. try it and post back what happens


#6

Here’s the link for it [B]dvdfab 5.2.1.2 Beta[/B]


#7

Well - I updated to the newest DVD fab, and then I used compressed air to lightly blow out the drive - and voila!!! IT WORKS

Thanks for the help everyone - I really appreciate it!


#8

Well - after that one successful burn - the next one didn’t work. It had the same error as before.

This is the log -
2008-12-19 13:57:34 ---- ******************** Log session stop 19-Dec 13:57:34.734 PID 3260********************
2008-12-19 13:38:34 Error WRITE FAILED: write error occured at 199.9 percent of the write
2008-12-19 13:38:33 Error Write error at 1928208 (16) - Code 03 73 03 [Medium error, Power calibration fail (CD-burner is dirty)]
2008-12-19 13:18:32 Info Lead-in burning time (mS) 606
2008-12-19 13:18:31 Info Write started 3854752 sectors to write
2008-12-19 13:18:31 Info Init success: DVD+R Dual Layer
2008-12-19 13:18:31 Info Init DVD+R Dual Layer: Layer change set to LBA 1927392 (3.68 Gb.)
2008-12-19 13:17:59 Info Writing speed requested x2.4, effective x2.0
2008-12-19 13:17:59 Info layer break set by filesystem builder at 0
2008-12-19 13:17:59 Info Available write speed: 2.4x,
2008-12-19 13:17:59 Info Media ID: RITEK-S04-42
2008-12-19 13:17:59 Info Media type: Dual Layer DVD+R
2008-12-19 13:17:59 Info Ultra DMA mode 2 (ATA33)
2008-12-19 13:17:56 Info Scanned files #32, folder #2 - total size 7893381120 b. (7.35 Gb.)
2008-12-19 13:17:56 Info Inserted media type : DL DVD+R
2008-12-19 13:17:56 Info Write started
2008-12-19 13:17:53 Info New media (DL DVD+R) inserted. Burning layer is ready to write
2008-12-19 13:17:50 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2008-12-19 13:17:50 Info Drive has IDE-ATAPI physical interface
2008-12-19 13:17:50 Info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 13:17:50 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 13:17:50 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 13:17:50 Info System default language : English (United States)
2008-12-19 13:17:50 Info User default language : English (United States)
2008-12-19 13:17:50 Info DLL Version : 3.2.2.402
2008-12-19 13:17:50 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 13:17:50 Info Version : 5, 2, 1, 2
2008-12-19 13:17:50 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 13:17:50 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 13:17:50 ---- ******************** Log session start 19-Dec 13:17:50.625 PID 3260********************

2008-12-19 13:14:43 ---- ******************** Log session stop 19-Dec 13:14:43.828 PID 3260********************
2008-12-19 13:14:43 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 13:14:43 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 13:14:43 Info System default language : English (United States)
2008-12-19 13:14:43 Info User default language : English (United States)
2008-12-19 13:14:43 Info DLL Version : 3.2.2.402
2008-12-19 13:14:43 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 13:14:43 Info Version : 5, 2, 1, 2
2008-12-19 13:14:43 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 13:14:43 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 13:14:43 ---- ******************** Log session start 19-Dec 13:14:43.281 PID 3260********************

2008-12-19 13:08:00 ---- ******************** Log session stop 19-Dec 13:08:00.062 PID 2488********************
2008-12-19 12:35:05 Info WRITE SUCCESS: Disc written
2008-12-19 12:35:05 Info Finalization Time 00:01:21 - Total completion time 00:41:12
2008-12-19 12:33:44 Info Write finished in 00:39:51 - Finalization start here. Avg. burn rate 2.64
2008-12-19 11:53:54 Info Lead-in burning time (mS) 607
2008-12-19 11:53:53 Info Write started 3889328 sectors to write
2008-12-19 11:53:53 Info Init success: DVD+R Dual Layer
2008-12-19 11:53:53 Info Init DVD+R Dual Layer: Layer change set to LBA 1944672 (3.71 Gb.)
2008-12-19 11:53:21 Info Writing speed requested x2.4, effective x2.0
2008-12-19 11:53:21 Info layer break set by filesystem builder at 0
2008-12-19 11:53:21 Info Available write speed: 2.4x,
2008-12-19 11:53:21 Info Media ID: RITEK-S04-42
2008-12-19 11:53:21 Info Media type: Dual Layer DVD+R
2008-12-19 11:53:21 Info Ultra DMA mode 2 (ATA33)
2008-12-19 11:53:18 Info Scanned files #29, folder #2 - total size 7964192768 b. (7.42 Gb.)
2008-12-19 11:53:18 Info Inserted media type : DL DVD+R
2008-12-19 11:53:18 Info Write started
2008-12-19 11:53:15 Info New media (DL DVD+R) inserted. Burning layer is ready to write
2008-12-19 11:53:12 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2008-12-19 11:53:12 Info Drive has IDE-ATAPI physical interface
2008-12-19 11:53:12 Info New Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 11:53:12 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 11:53:12 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 11:53:12 Info System default language : English (United States)
2008-12-19 11:53:12 Info User default language : English (United States)
2008-12-19 11:53:12 Info DLL Version : 3.2.2.402
2008-12-19 11:53:12 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 11:53:12 Info Version : 5, 2, 1, 2
2008-12-19 11:53:12 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 11:53:12 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 11:53:12 ---- ******************** Log session start 19-Dec 11:53:12.687 PID 2488********************

2008-12-19 11:51:45 ---- ******************** Log session stop 19-Dec 11:51:45.234 PID 2488********************
2008-12-19 11:51:44 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 11:51:44 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 11:51:44 Info System default language : English (United States)
2008-12-19 11:51:44 Info User default language : English (United States)
2008-12-19 11:51:44 Info DLL Version : 3.2.2.402
2008-12-19 11:51:44 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 11:51:44 Info Version : 5, 2, 1, 2
2008-12-19 11:51:44 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 11:51:44 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 11:51:44 ---- ******************** Log session start 19-Dec 11:51:44.687 PID 2488********************

2008-12-19 11:51:35 ---- ******************** Log session stop 19-Dec 11:51:35.062 PID 348********************
2008-12-19 11:49:06 Info New media (DL DVD+R) inserted. Burning layer is ready to write
2008-12-19 11:49:03 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 11:49:03 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 11:49:03 Info System default language : English (United States)
2008-12-19 11:49:03 Info User default language : English (United States)
2008-12-19 11:49:03 Info DLL Version : 3.2.2.402
2008-12-19 11:49:03 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 11:49:03 Info Version : 5, 2, 1, 2
2008-12-19 11:49:03 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 11:49:03 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 11:49:03 ---- ******************** Log session start 19-Dec 11:49:03.578 PID 348********************

2008-12-19 11:48:58 ---- ******************** Log session stop 19-Dec 11:48:58.296 PID 1480********************
2008-12-19 11:48:16 Info New media (DL DVD+R) inserted. Burning layer is ready to write
2008-12-19 11:48:13 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 11:48:13 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 11:48:13 Info System default language : English (United States)
2008-12-19 11:48:13 Info User default language : English (United States)
2008-12-19 11:48:13 Info DLL Version : 3.2.2.402
2008-12-19 11:48:13 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 11:48:13 Info Version : 5, 2, 1, 2
2008-12-19 11:48:13 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 11:48:13 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 11:48:13 ---- ******************** Log session start 19-Dec 11:48:13.593 PID 1480********************

2008-12-19 02:16:29 ---- ******************** Log session stop 19-Dec 02:16:29.984 PID 2564********************
2008-12-19 02:16:13 Info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
2008-12-19 02:16:13 Info Using Patin-Couffin driver Version 1.37, Internal revision 37 Async. Access mode
2008-12-19 02:16:13 Info System default language : English (United States)
2008-12-19 02:16:13 Info User default language : English (United States)
2008-12-19 02:16:13 Info DLL Version : 3.2.2.402
2008-12-19 02:16:13 Info DLL : C:\Program Files\DVDFab 5\vso_hwe.dll
2008-12-19 02:16:13 Info Version : 5, 2, 1, 2
2008-12-19 02:16:13 Info ExeName : C:\Program Files\DVDFab 5\DVDFab.exe
2008-12-19 02:16:13 Info OS : Microsoft Windows XP Professional (build 2600) with Service Pack 3 5.1
2008-12-19 02:16:13 ---- ******************** Log session start 19-Dec 02:16:13.500 PID 2564********************

12/19/2008 2:11:23 AM info ******************** Report session closed *********************
12/19/2008 2:10:58 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/19/2008 2:10:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/19/2008 2:10:58 AM info User default language : 1033 (0x0409h) - English (United States)
12/19/2008 2:10:58 AM info System default language : 1033 (0x0409h) - English (United States)
12/19/2008 2:10:58 AM info DLL Version 5, 0, 8, 5
12/19/2008 2:10:58 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/19/2008 2:10:58 AM info Version 5, 0, 8, 5
12/19/2008 2:10:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/19/2008 2:10:58 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/19/2008 2:10:58 AM info ******************** Report session started ********************

12/19/2008 2:10:58 AM info Current Drive selected : 1:0:0 - _NEC DVD±RW ND-6650A 103D [D] (Ide)
12/19/2008 2:10:58 AM info Using Patin-Couffin driver Version 1.37, Internal revision 37 - Async. Access mode
12/19/2008 2:10:58 AM info User default language : 1033 (0x0409h) - English (United States)
12/19/2008 2:10:58 AM info System default language : 1033 (0x0409h) - English (United States)
12/19/2008 2:10:58 AM info DLL Version 5, 0, 8, 5
12/19/2008 2:10:58 AM info DLL C:\Program Files\DVDFab 5\DVDFab.exe
12/19/2008 2:10:58 AM info Version 5, 0, 8, 5
12/19/2008 2:10:58 AM info ExeName : "C:\Program Files\DVDFab 5\DVDFab.exe"
12/19/2008 2:10:58 AM info OS : Microsoft Windows XP Professional Service Pack 3 (Build 2600)
12/19/2008 2:10:58 AM info ******************** Report session started ********************

any reason that it would not work now? Is it dirty again?!?!


#9

No doubt, get a better burner.


#10

Here is an option to try. Full rip Dvd9 to your hard drive with DvdFab then burn the output VIDEO_TS folder with ImgBurn, as in the following.

http://forum.digital-digest.com/showthread.php?t=86742

http://www.imgburn.com/


#11

Well - I just thought I should close this up for informational purposes.
None of the above techniques provided a full fix - that worked consistently. It ended up being the burner - Dell sent me a replacement and now it works just fine.

THANKS


#12

[quote=badbear811;2196647]Well - I just thought I should close this up for informational purposes.
None of the above techniques provided a full fix - that worked consistently. It ended up being the burner - Dell sent me a replacement and now it works just fine.

THANKS[/quote]
Well I’m glad you have it working now


#13

[QUOTE=beef barley;2180075]Here is an option to try. Full rip Dvd9 to your hard drive with DvdFab then burn the output VIDEO_TS folder with ImgBurn, as in the following.

http://forum.digital-digest.com/showthread.php?t=86742

http://www.imgburn.com/[/QUOTE]

So is that way better than this way? http://forum.imgburn.com/index.php?showtopic=1780


#14

No.


#15

Straight to the point.

Cheers


#16

this drive really has many problems buring with DL media. i also taken a look on its f/w (103D) using MCSE found out that it only supports 9 types of DL media compared to my LG-H22L that can support 19 types. That’s problably my answer why it does not burn properly on some DL media.:iagree: