Dual layer burn fail / single layer is OK

vbimport

#1

Hey everyone, I hope I’m posting this in the right place, I haven’t posted here before and there are quite a few boards to choose from, but I’m pretty much a newbie to dual layer burning so I think this might be the right place !

I’ve been burning single layer DVD’s without any problems at all, I have in the past successfully burned dual layered DVD’s but I’ve ben having problems lately. I think I’ve wasted the last 12 dual layered blanks I’ve tried to burn to, Verbatim which I originally had no problems with and also TDK.

I really don’t know what setting I should have everything on but I believe I’m doing it right, using Nero, I’m trying to make a DVD - DVD copy burning at 2.4x with 2.4x TDK blanks, booktype setting at DVD-ROM, I can’t figure out what else I can change to make a difference.

I don’t much about what the burn log tells you, maybe someone can spot something causing the problem, I’ve noticed #25 says “Power Callibration Error”, but it seems to continue burning for a few steps after that, is this the problem, and if so can anyone tell me how to fix it ?

Thanks

Brent

1A20-****-****-****-****-***** 

Windows XP 5.1 
IA32 
WinAspi: - 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/10/2004 3:35:32 AM 
Nero Version: 6.6.0.17 
Internal Version: 6, 6, 0, 17c 
(Nero Express) 
Recorder: <LITE-ON DVDRW SHM-165P6S>Version: MS0P - HA 0 TA 1 - 6.6.0.17 
Adapter driver: <atapi> HA 0 
Drive buffer : 2048kB 
Bus Type : default (0) -> ATAPI, detected: ATAPI 
CD-ROM: <PIONEER DVD-ROM DVD-120 >Version: 1.22 - HA 1 TA 1 - 6.6.0.17 
Adapter driver: <atapi> HA 1 

=== Scsi-Device-Map === 
DiskPeripheral : ST3120023A atapi Port 0 ID 0 DMA: On 
CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 0 ID 1 DMA: On 
CdRomPeripheral : SAMSUNG CD-R/RW SW-240B atapi Port 1 ID 0 DMA: On 
CdRomPeripheral : PIONEER DVD-ROM DVD-120 atapi Port 1 ID 1 DMA: On 
CdRomPeripheral : UT1819P GXF614S 1.0 aukoh4rn Port 2 ID 0 DMA: Off 

=== CDRom-Device-Map === 
LITE-ON DVDRW SHM-165P6S E: CDRom0 
SAMSUNG CD-R/RW SW-240B F: CDRom1 
PIONEER DVD-ROM DVD-120 G: CDRom2 
UT1819P GXF614S H: CDRom3 
======================= 

AutoRun : 1 
Excluded drive IDs: 
WriteBufferSize: 70254592 (0) Byte 
ShowDrvBufStat : 0 
BUFE : 0 
Physical memory : 479MB (490852kB) 
Free physical memory: 78MB (80376kB) 
Memory in use : 83 % 
Uncached PFiles: 0x0 
Use Inquiry : 1 
Global Bus Type: default (0) 
Check supported media : Disabled (0) 

9.1.2007 
DVD-Copy on the fly 
3:08:27 PM #1 Text 0 File Reader.cpp, Line 127 
Reader running 

3:08:27 PM #2 Text 0 File Writer.cpp, Line 122 
Writer LITE-ON DVDRW SHM-165P6S running 

3:08:27 PM #3 Text 0 File DVDCopy.cpp, Line 293 
DVD Track-Information from source disc: 
Media Type: DVD-ROM 
Last LBA on layer 0 = 2062639 / 0x1F792F / 4028MB 
S01 T01 Con 0x04 Start 0 Len 4125264 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 

3:08:27 PM #4 Text 0 File DVDCopy.cpp, Line 406 
Max -1 tracks of 1 allowed to copy 
1: 0 - 4125264 = 4125264, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 

3:08:27 PM #5 Text 0 File Burncd.cpp, Line 3233 
Turn on Disc-At-Once, using DVD media 

3:08:28 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 
Last possible write address on media: 4173823 (927:30.73, 8151MB) 
Last address to be written: 4125263 (916:43.38, 8057MB) 

3:08:28 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 
Write in overburning mode: NO (enabled: CD) 

3:08:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 
Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD+R9 Double Layer 
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1 
Disc Application Code: 0, Extended Information Indicators: 0 

3:08:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 
>>> Protocol of DlgWaitCD activities: <<< 
========================================= 

3:08:28 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 
Setup items (after recorder preparation) 
0: TRM_DATA_MODE1 (1 - Data (mode 1)) 
2 indices, index0 (150) not provided 
original disc pos #0 + 4125264 (4125264) = #4125264/916:43.39 
not relocatable, disc pos for caching/writing not required/not required, no patch infos 
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4125264 blocks [LITE-ON DVDRW SHM-165P6S] 
-------------------------------------------------------------- 

3:08:28 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 
Prepare recorder [LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO 
DAO infos: 
========== 
MCN: "" 
TOCType: 0x40; Session Closed, disc fixated 
Tracks 1 to 1: 
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8448540672, ISRC "" 
DAO layout: 
=========== 
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 
0 | lead-in | 0 | 0x41 | 0x00 
0 | 1 | 0 | 0x41 | 0x00 
0 | 1 | 1 | 0x41 | 0x00 
4125264 | lead-out | 1 | 0x41 | 0x00 

3:08:28 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832 
Burn process started at 2.4x (3,324 KB/s) 

3:08:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661 
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 

3:09:14 PM #14 SCSI -1066 File Cdrdrv.cpp, Line 1182 
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B370A00 
Status: 0x04 (0x01, SCSI_ERR) 
HA-Status 0x00 (0x00, OK) 
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) 
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) 
Sense Code: 0x24 
Sense Qual: 0x00 
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00 
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 
0x00 0x00 0x00 0x00 0x24 0x00 

3:09:14 PM #15 Text 0 File DVDPlusDualLayer.cpp, Line 628 
L0 Data Zone Capacity set to 2062640 (1F7930h, 4028MB) -> OK, confirmed setting 

3:09:15 PM #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 655 
Burning Layer 1 

3:09:15 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 665 
Start writing layer 1 at address 0 (0h) 
Recording mode: unknown Recording Mode 

3:09:15 PM #18 Text 0 File Cdrdrv.cpp, Line 8892 
---- DVD Structure: Physical Format Information (00h) ---- 
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 
Book Type: DVD+R DL (14), Part Version: 1.0x (1) 
Disc Size: 120 mm, Maximum Rate: <not specified> (F h) 
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable 
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track 
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) 
End Physical Sector Number of Data Area: FCFFFF h 
End Sector Number in Layer 0: 22792F h (LBN: 1F792F h, 4028 MB) 
Data in Burst Cutting Area (BCA) does not exist 
Disc Application Code: 0 / 0 h 
Extended Information indicators: 0 h 
Disc Manufacturer ID: RITEK... 
Media type ID: D01 
Product revision number: 1 
Number of Physical format information bytes in use in ADIP up to byte 63: 64 
Media Specific [16..63]: 
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@ 
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d...... 
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 

3:09:15 PM #19 Text 0 File DVDR.cpp, Line 5814 
Drive: LITE-ON DVDRW SHM-165P6S 
Book Type request [LO], rev 3: DVD-ROM 
Changing the Book Type was finished successfully, return code 0 

3:09:15 PM #20 CDR -1211 File DVDR.cpp, Line 5235 
Book Type set to: DVD-ROM 

3:09:15 PM #21 Text 0 File DVDPlusRW.cpp, Line 665 
Start write address at LBA 0 
DVD high compatibility mode: Yes 

3:30:32 PM #22 CDR -1206 File DVDPlusDualLayer.cpp, Line 1909 
Burning Layer 2 

3:30:32 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 1920 
Perform layer 1 to 2 jump before writing at address 2062640 (1F7930h) 

3:30:32 PM #24 SCSI -1106 File Cdrdrv.cpp, Line 1436 
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x0B371E00 
Status: 0x04 (0x01, SCSI_ERR) 
HA-Status 0x00 (0x00, OK) 
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) 
Sense Key: 0x03 (KEY_MEDIUM_ERROR) 
Sense Code: 0x73 
Sense Qual: 0x03 
CDB Data: 0x2A 0x00 0x00 0x1F 0x79 0x30 0x00 0x00 0x10 0x00 0x00 0x00 
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
0x00 0x00 0x00 0x00 0x73 0x03 

3:30:32 PM #25 CDR -1106 File Writer.cpp, Line 311 
Power calibration error 

3:30:32 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 
all writers idle, stopping conversion 

3:30:32 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 
conversion idle, stopping reader 

3:30:35 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1182 
SCSI Exec, HA 0, TA 1, LUN 0 
Status: 0x04 (0x01, SCSI_ERR) 
HA-Status 0x00 (0x00, OK) 
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) 
Sense Key: 0x03 (KEY_MEDIUM_ERROR) 
Sense Code: 0x73 
Sense Qual: 0x03 
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 
0x00 0x00 0x00 0x00 0x73 0x03 

3:30:35 PM #29 SCSI -1176 File Cdrdrv.cpp, Line 1182 
SCSI Exec, HA 0, TA 1, LUN 0 
Status: 0x04 (0x01, SCSI_ERR) 
HA-Status 0x00 (0x00, OK) 
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) 
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) 
Sense Code: 0x72 
Sense Qual: 0x03 
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 
0x00 0x00 0x00 0x00 0x72 0x03 

3:30:35 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832 
Generating DVD high compatibility borders 

3:30:35 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832 
Generating DVD borders completed successfully 

3:30:35 PM #32 Text 0 File DVDR.cpp, Line 5814 
Drive: LITE-ON DVDRW SHM-165P6S 
Book Type request [LO], rev 3: DVD+R DL 
Changing the Book Type was finished successfully, return code 0 

3:30:35 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832 
Burn process failed at 2.4x (3,324 KB/s) 


Existing drivers: 
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec) 

Registry Keys: 
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

#2

Bad quality disks. These TDK’s are actually manufactured by Ritek and are known to be poor quality. If you look in the log, you’ll see several medium errors listed. Only use Verbatim dual layer disks.

The real question is why you had problems with the Verbatims at some point. They are the only reliable dual layer disks that are widely available (some people like the Ricoh made DL’s).

From your post it sounds like you are copying a commercial dvd—is that correct? The process I use doesn’t involve Nero at all. I rip to the hard drive using DVDDecrypter or RipIt4Me and have the output as an ISO file. Since I am going to a DL disk, no compression is necessary most of the time, so I don’t use DVDShrink as part of the process while using RipIt4Me.

Then I use ImgBurn to burn to the dual layer disk. ImgBurn (or DVDDecrypter) will position the layer break correctly when burning a movie to dual layer, which is something that Nero doesn’t always do.

When the ISO is made by RipIt4Me or DVDDecrypter, you will get an image file and a very small mds file. Use the mds file as the source when burning with ImgBurn or DVDDecrypter and you will be assured of getting the layer break set correctly.

ImgBurn, DVDDecrypter and RipIt4Me are all free programs by the way.


#3

Hey Kerry56, thanks for your reply.

The reason I’m using those TDK discs is because I wasted about 8 of the Verbatim discs (which used to work for me).
The DVD I’m trying to copy isn’t a commercial DVD, it’s a friends DVD dual layer DVD+R.

I forgot to mention in my original post that I have also tried saving to the hard drive then loading the files into Nero, it seems to burn fine that way, it even gets through the data verification fine, but when I try to play it, it spins in my DVD player for 2 minutes before it starts to read, it I can then skip through the tracks on the DVD but I get about half way and it jams…

I don’t understand what the stuff in the burn log means so I really can’t solve the problem myself using the burn logs.

I also tried an ISO read and ISO write with DVD Decrypter and it said something about a “Power callibration error” when it failed, I also spotted that in the Nero log #25 in my original post just before the burn failed.


#4

You get power calibration errors when the media doesn’t fit the specifications for the drive’s burning strategy found in the firmware of the drive. The dvd drive tries repeatedly to calibrate the laser and if it cannot, you get this error message. Most of the time you see this with poor quality disks, or disks not supported by the firmware of your drive. You can try updating the firmware, but with Ritek DL disks, I think you are just spinning your wheels needlessly.

You can also get power calibration errors when the drive is deteriorating. Sometimes this is a sign that your dvd drive is about to fail entirely.


#5

OK I just did an ISO Read and ISO write with DVD Decrypter and got a “Power Calibration Error”, like I said in my original post I also got the “Power Calibration Error” doing a DVD to DVD burn with Nero.

I’m getting it using blank DVD’s I’ve had success with before, eg Verbatim.
And I don’t think my drive is deteriorating because it’s only 2 months old and I’ve been burning many single layer DVD’s and CD’s with it without a single problem, the only problem is with the dual layered DVD’s…

This is getting very expensive, I think I’m up to 14 wasted dual layered blanks.


#6

Physical memory : 479MB (490852kB)
Free physical memory: [B]78MB[/B] (80376kB)
Memory in use : 83 %
Try shutting down some programs running in the background to free up some memory.


#7

Hey Dialysis1, thanks for the tip, OK this shows how little I know, where do I go to check my memory in use ?, I’m using Windows XP.
On the bottom of my screen I can’t see many programs that would be running, I know you can bring up a screen that shows you everything that is running but I’m having trouble finding it.

And thanks C0deKing for editing my original Nero burn log, I’m not quite sure why it says you needed to remove the serial number and place report in code tags but thanks anyway.


#8

Hit control alt delete and it will bring up Windows Task Manager. This will show running programs and processes. The Performance tab will show memory usage.


#9

Copy OTF a DVD9 with such an setup and crap media…?..

3:08:28 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: [B]RITEK, Media Type ID: D01[/B], Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0


#10

Hey guys, thanks for all of your posts.

Just wasted my 15th dual layer disc.

First I should say the reason I’m using TDK is because this problem originally started while I was using Verbatim (which used to work for me), I have 1 TDK disc left then I’ll start buying Verbatim again but that won’t fix the problem as like said I was using Verbatim when the problem originally started.

First I pulled out all the plugs in my bruners and securely stuck everything back in the right place to make sure the power supply was fine.

I used Control/Alt/Delete and saw that my Total Physical Memory is 490852. I shut down all programs running under my Username (I did not shut anything down running under Network Service or System as I don’t know about that stuff and I’m not sure if I should be shutting that kind of stuff down), so after I shut down everything under my Username it resulted in my Available Physical Memory going from approx 110000 to approx 181000.
Does that seem OK ? Or do I need to shut more stuff down under Network Service and System ?

I then avoided burning with Nero this time.
So I saved a different DVD to my hard drive using File mode in DVD Decrypter and tried burning with ImageBurn following these steps :

I got this burn fail message :
I/0 Error !
Device (0:1:0) Lite On DVDRW SHM-165P6S MSOP (E:) (ATA)
ScsiStatus 0x02
Interpretation : Check Condition
CPB: 24 00 00 1C BC D0 00 00 20 00
Interpretation Write (10) - Sectors: 1883344 - 1883375
Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00 00
Interpretation: Power Calibration Error

I wish i knew more about this kind of stuff.

Thanks


#11

If you receive the “Power calibration error” message, the cause will be either poor media, poor power, or a defective recorder.


#12

Generally that’s about right, but my recorder is 2 months old, at the same time I got it I got a new power input which assured enough power was supplied to all my drives / computer etc
Verbatim discs used to work and now don’t.
It seems everything is covered, I think I’ll just have to give up on doing dual layer burns…, thanks for trying to help guys.


#13

I can’t get DL burns right either… but here’s a thought: a 20 pack of DL discs costs about $40 and at best will backup about 160GB of data (with a lot of time and effort). You can find 160GB hard disks for $40 (on sale) and they are quicker to use and are more reliable (if you power them on only when needed). It seems to me it’s a better option for achiving purposes. I’m giving up on DL discs and will start to look for bargains on hard disks (<= $0.25/GB).


#14

Well I just purchased a 3 pack of Verbatim.
If they don’t work I’m up to 20 burns failing in a row.
I’m not trying anymore after this…


#15

Before going further, have you checked if there are any firmware updates available for your drive?

Also, your nero version is quite old, have you considered updating to a newer version?

What about trying imgburn, it’s free software and quite a quick download.


#16

So I saved a different DVD to my hard drive using File mode in DVD Decrypter and tried burning with ImageBurn following these steps :
http://forum.imgburn.com/index.php?showtopic=1780

Looks like he already tried ImgBurn. But that was with one of the Ritek disks.

Wish I had something else to suggest. The price of DL media being what it is, you have already spent more than the cost of a new dvd burner on failed burns.
Let us know how you do with these last Verbatims.


#17

Hi guys.

Yeah if you read one of my posts above there is a link on how to do a burn with DVD Decrypter and ImageBurn which I followed but failed.

OK below might be some clues to as to what kind of problem I’m dealing with, but my knowledge isn’t good enough for it to mean much to me.

I just found a piece of paper where I had written down 3 months ago the details of the last 2 successful dual layer burns I made !

I had success back then using 2 different methods to burn the CD’s.

The 2nd last time was with this same burner I have now back in November I copied “The Cure - Trilogy (2002 DVD)” which is a 2DVD set, they are both dual layer DVD’s and I copied them by doing a direct DVD to DVD copy with Nero, at that time I didn’t use anything to get around copyright because I hadn’t downloaded any of that stuff yet. So that was a simple direct DVD to DVD copy !

The last time I did a successful dual layer copy was when I copied “Depeche Mode - Touring the Angel : Live in Milan (2006 DVD)”.
This time I believe Nero said it was copyright protected and it didn’t let me to a direct DVD to DVD copy with this particular DVD.
I remember downloading different programs to try and get past the protection.
Finally I got past the copyright protection warnings but I wasn’t actually sure which program was the one that helped me, but I thought it was AnyDVD 6.0.88 (the red fox), I have noted at the time of that successful burn I had on my computer *Any DVD, *Clone DVD (I think #2)?, 2 types of DVD Decrypter and DVD Shrink, but like I said I’m pretty sure AnyDVD 6.0.88 was what helped.

And this is how I burned the DVD.
*opened Nero Express
*selected DVD Video Files
*selected the original DVD in the drive
*then I selected the 2 files (audio ts and video ts)
*I then lined them up in Nero (20 min process)
*select all
*and successfully burned the DVD at x4.

Unfortunetly when I went to copy the latest DVD I have found that AnyDVD had expired (passed the 21 day trial), but that doesn’t seem to be the issue as I have recently tried to copy a DVD+R DL (obviously that isn’t copyrighted) and got a fail.

I just had the idea to try and copy a DVD now with the method I just described I last had successs with but when I went to load into Nero I got this :
The File ‘G:\VIDEO_TS\VTS_01_0.VOB’ could not be read.
I read something about it being a file you just delete before you burn ?

So I save it to my hard drive with DVD Decrypter and loaded it into Nero planning to use the same method above and it said "DVD-Video files reallocation failed. The resulting DVD-Video might be unplayable, Do you want to continue ? YES / NO

I’m really not sure what is going on, it seems like a number of things !

I’m really hesitant to use the last few Verbatim discs as I don’t feel I have anything new to work with since my last failed burn !


#18

Yeah my burner firmware is up to date.
Not sure about Nero, it’s off the DVD I got with my burner when I purchased it in November so I thought it was reasonably up to date as well.


#19

Hey guys !

I’VE MADE A SUCCESSFUL BURN, THE FIRST IN OVER 15 WASTED DL DVD’S !

Since my last failed burn I made these changes, I’m not sure exactly which one it was that made it work !

I noticed on my computer that local disc D has an enormous amount of space compared to local disc C.

So:

*I changed “Path for Cache” in Nero from C drive to D drive.

*I changed Nero’s Temp files, Picture files and Imported Video files from C drive to D drive.

*In Nero Transcoding Quality-Quality Setting I changed it from Standard Play to High Quality and I changed Encoding Mode from Fast Encoding (1 Pass) to High Quality (2 Pass VBR), I also unticked ‘Enable Smart Encoding of Audio and Video material’, but this was all in a different mode to the mode I burned in - this actually wasn’t an option in the mode I used when I made the successful burn so I’m not sure what effect the changes had.

*I also deleted the version of “DVD Decrypter” I had been using and downloaded and used “DVD Fab Decrypter 3”.

I opened Nero Express, selected DVD-Video Files, add the AUDIO TS and VIDEO TS folders and burned onto the TDK disc ! haha

I still have the 3 Verbatim discs to spare !


#20

That is good but I would now test / scan the disc for quality too.

You may could use Nero cd dvd speed.