DMA-driver error, CRC error.. LG Drive: HL-DT-ST DVDRAM GSA-H44N

hi… i’m using LG Drive: HL-DT-ST DVDRAM GSA-H44N and imation dvd+r|16x disc to burn data disc… after trying out over 5disc all fail… tried with 16x,12x,8x,4x all fail…

i’m noob with this kinda stuff so please be patient with me…

here’s the log with 4x speed:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.13.2
Internal Version: 7, 5, 13, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H44N>Version: RB00 - HA 1 TA 0 - 7.5.13.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ZK3371U TKB288C >Version: 1.0 - HA 1 TA 1 - 7.5.13.2
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HDT725025VLA380 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GSA-H44N RB00 JRAID Port 4 ID 0 DMA: Off
CdRomPeripheral : ZK3371U TKB288C 1.0 acuok0h8 Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H44N E: CDRom0
ZK3371U TKB288C G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047660kB)
Free physical memory: 596MB (610624kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.4.2007
ISO compilation
10:03:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:03:10 PM #2 Text 0 File Isodoc.cpp, Line 6517
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:03:10 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

10:03:10 PM #4 Text 0 File Burncd.cpp, Line 3471
Turn on Disc-At-Once, using DVD media

10:03:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2145679 (476:49.04, 4190MB)

10:03:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

10:03:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: HL-DT-ST DVDRAM GSA-H44N, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

10:03:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:03:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2145680 (2145680) = #2145680/476:49.5
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2145680 blocks [E: HL-DT-ST DVDRAM GSA-H44N]
--------------------------------------------------------------

10:03:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-H44N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4394352640, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2145680 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2145680 | 0 | 0x00
2145680 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:03:10 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:03:10 PM #12 Phase 24 File dlgbrnst.cpp, Line 1760
Caching of files started

10:03:10 PM #13 Text 0 File Burncd.cpp, Line 4355
Cache writing successful.

10:03:10 PM #14 Phase 25 File dlgbrnst.cpp, Line 1760
Caching of files completed

10:03:10 PM #15 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 4x (5,540 KB/s)

10:03:10 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:03:10 PM #17 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 …CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7…>n.pb…
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 …

10:03:10 PM #18 Text 0 File DVDR.cpp, Line 6324
Drive: HL-DT-ST DVDRAM GSA-H44N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

10:03:10 PM #19 CDR -1207 File DVDR.cpp, Line 6247
Book Type automatically set to: DVD-ROM

10:03:10 PM #20 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

10:03:20 PM #21 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 0E 08 03
Buffer x09a40040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

10:03:20 PM #22 CDR -1502 File Writer.cpp, Line 299
DMA-driver error, CRC error
E: HL-DT-ST DVDRAM GSA-H44N

10:03:23 PM #23 Phase 127 File dlgbrnst.cpp, Line 1760
Generating DVD high compatibility borders

10:05:21 PM #24 Phase 129 File dlgbrnst.cpp, Line 1760
Generating DVD borders completed successfully

10:05:21 PM #25 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 4x (5,540 KB/s)

10:05:21 PM #26 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:05:29 PM #27 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 02 00 03 0E 53

10:05:31 PM #28 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

10:05:31 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 8:00:00 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

thanks for reading…

Hi [B]shinynova[/B], welcome to CD Freaks! :slight_smile:

Well, that’s not exactly great media.
Try some Taiyo Yuden or Verbatim instead. :wink:

If that fails, replace the ide cable.

The dma for that drive is off. Turn it on.

thanks for the welcome…

how do i turn on the dma?

It is listed as off because it is connected to a different than the atapi driver.

CdRomPeripheral : HL-DT-STDVDRAM GSA-H44N RB00 [B]JRAID[/B] Port 4 ID 0 DMA: Off

@shinynova:
as your drive is connected to a Jmicron PCI/IDE controller, please read this thread: http://club.cdfreaks.com/showthread.php?t=189057

Michael

Hey PPl new here but was having trouble with my new burner GSA-H44N After reading this thread and others around the net i tried 90% of the ideas and found none that worked. Doing some experimenting and 5 dvd’s later discovered that making the GSA the slave seemed to solve my problem of DMA driver error and CRC error. May not solve it for everyone but thought i’d pop in my two cents worth. Also running a cd burner dvd drive as master and able to quick copy between the two using nero ultra.
Hope this helps someone out

                          Tinnyluck