Dma driver error cmc error

vbimport

#1

ik kan niet branden krijg een error hier heb ik een log
dit krijg ik als ik een dvd wil branden

familie pc

1C82-0000-19E5-MAAX-4002-8419-****

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32

NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0

Recorder: <Optiarc DVD RW AD-7170S> Version: 1.00 - HA 1 TA 2 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW SH-S182M>Version: SB03 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6V080E0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Optiarc DVD RW AD-7170S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182M atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M F: CDRom0
Optiarc DVD RW AD-7170S G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523500kB)
Free physical memory: 20MB (20840kB)
Memory in use : 96 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.1.2007
Burn DVD Image
12:32:56 #1 SPTI -1033 File SCSIPassThrough.cpp, Line 293
F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01

12:32:58 #2 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

12:32:58 #3 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media

12:32:58 #4 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1903308 (422:57.33, 3717MB)

12:32:58 #5 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD)

12:32:58 #6 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: Optiarc DVD RW AD-7170S, Media type: DVD+R
Disc Manufacturer ID: MJC, Media Type ID: 005, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

12:32:58 #7 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:32:58 #8 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1903309 (1903309) = #1903309/422:57.34
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1903159 blocks [Main]
--------------------------------------------------------------

12:32:58 #9 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [Optiarc DVD RW AD-7170S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3897976832, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1903309 | 1903159 | 0x00
0 | 1 | 1 | 0x41 | 1903309 | 1903159 | 0x00
1903309 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

12:32:58 #10 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:32:58 #11 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

12:32:58 #12 Text 0 File Burncd.cpp, Line 4262
Cache writing successful.

12:32:58 #13 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

12:32:58 #14 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 16x (22.160 KB/s)

12:32:58 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:32:58 #16 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MJC…
Media type ID: 005
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 4D 4A 43 00 00 - 00 00 00 30 30 35 00 38 …MJC…005.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7…Tl…_…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

12:32:58 #17 SPTI -1065 File SCSIPassThrough.cpp, Line 293
G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

12:32:58 #18 SPTI -1065 File SCSIPassThrough.cpp, Line 293
G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20

12:32:58 #19 Text 0 File DVDR.cpp, Line 7051
Drive: Optiarc DVD RW AD-7170S
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065

12:32:58 #20 Text 0 File DVDR.cpp, Line 6450
Drive: Optiarc DVD RW AD-7170S
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065

12:32:58 #21 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes

12:33:26 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 293
G: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x05d8da00: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

12:33:26 #23 CDR -1502 File Writer.cpp, Line 278
DMA-driver error, CRC error
G: Optiarc DVD RW AD-7170S

12:33:43 #24 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders

12:34:29 #25 CDR -1093 File WriterStatus.cpp, Line 161
No seek complete
G: Optiarc DVD RW AD-7170S

12:34:29 #26 TRANSFER -24 File WriterStatus.cpp, Line 161
Could not perform end of Disc-at-once

12:34:29 #27 Phase 39 File dlgbrnst.cpp, Line 1746
Burn process aborted

12:34:29 #28 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

12:34:29 #29 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Allereerst heb je bijzonder weining werkgeheugen overgelaten voor Nero. Daarnaast blijkt het fout te gaan tijdens het instellen van de Booktype van de DVD brander. Dit kun je uitschakelen in de opties. Het merk MJC is mij onbekend, dus daar kan ik weinig over zeggen of het daar aan ligt.

Wellicht kun je eens een simulatie, op lagere brandsnelheid, met een rewritable disc, maken? Gaat het bij elke dvd schrijfactie fout of alleen bij een bepaalde film en/of data?


#3

Als het bij al deze dvd’s misgaat is het mischien een idee om de firmware te updaten (je werkt nog met versie 1.00) Ook kan het handig zijn om de pc eens open te schroeven om te controleren of de kabels wel goed vast zitten (controleer of alle pinnetjes contact maken)
En als het nog nooit goed gelukt is om dvd’s te branden moet je de master slave instellingen controleren en goed zetten (bv ide1 de hd master en de dvdbrander slave) en op ide2 de cdromspeler op master (of de dvdbrander op ide2 als master en de cdrom als slave)