Disc At Once Failures

vbimport

#1

Gday folks,

first post here :slight_smile: was hoping I could get some help. I recently have been backing up my HDTV caps on SL-DVDR (Record and Ritek) at both 8x and 4x and have never had a problem except today when I cannot burn a DVD without having a Disc-At-Once failure. I am on the verge of throwing out my LG burner but was hoping someone could have a look at the Log before I do so. Any help would be greatly appreciated.

cheers,
oaf

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4082B>Version: A206 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <nvatabus> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AC9787D MAL343Y >Version: 1.0 - HA 3 TA 0 - 6.6.0.16
Adapter driver: <dtscsi> HA 3

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : IC35L060AVV207-0 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : ST3300831AS nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : AC9787D MAL343Y 1.0 dtscsi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4082B D: CDRom0
AC9787D MAL343Y F: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522672kB)
Free physical memory: 178MB (182612kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.4.2006
UDF compilation
4:28:10 PM #1 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Revision : 1.02
UDF Partition Type : physical

4:28:10 PM #2 Text 0 File Reader.cpp, Line 127
Reader running

4:28:10 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4082B running

4:28:10 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

4:28:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2292623 (509:28.23, 4477MB)

4:28:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

4:28:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4082B, Media type: DVD-R
Disc Manufacturer: GSC003 -
Disc Application Code: 64, Disc Physical Code: 193

4:28:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:28:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2292624 (2292624) = #2292624/509:28.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292624 blocks [HL-DT-ST DVDRAM GSA-4082B]
--------------------------------------------------------------

4:28:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4082B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4695293952, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2292624 | lead-out | 1 | 0x41 | 0x00

4:28:11 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:28:11 PM #12 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

4:28:11 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:28:11 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

4:28:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:28:11 PM #16 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

4:28:11 PM #17 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON

4:28:11 PM #18 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

4:28:11 PM #19 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00 …
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

4:28:42 PM #20 Text 0 File Cdrdrv.cpp, Line 1286
16:28:42.656 - HL-DT-ST DVDRAM GSA-4082B\H0 T0 : Queue again later

4:29:14 PM #21 SCSI -1039 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B0E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x74 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x34 0x04 0x0C 0x09 0x01

4:29:14 PM #22 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error

4:29:14 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:29:14 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:29:14 PM #25 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 29727

4:29:34 PM #26 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4082B\H0 T0

4:29:34 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

4:29:34 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.27a, size=20576 bytes, created 3/04/2006 9:53:39 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers
vatabus.sys’: Ver=5.10.2600.0479 built by: WinDDK, size=87936 bytes, created 12/01/2005 9:32:20 AM (Adapter driver for rec)
File ‘Drivers\dtscsi.sys’: Ver=?.?.?.?, size=223128 bytes, created 19/02/2006 5:09:06 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

Update Nero first, also try with better media.


#3

CdRomPeripheral : HL-DT-ST DVDRAM GSA-4082B nvatabus Port 0 ID 0 DMA: Off
DiskPeripheral : IC35L060AVV207-0 nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : ST3300831AS nvatabus Port 2 ID 0 DMA: Off
CdRomPeripheral : AC9787D MAL343Y 1.0 dtscsi Port 3 ID 0 DMA: Off

Enable DMA.

Disc Manufacturer: GSC003 -

As chef suggest use different media.

GSC003 :Z