Difficulties with new Lite-on 411s drive

Just installed much awaited DVD writer and can’t get it to recognize much in the way of media. It will play commercially burned DVDs, but won’t recognize commercially burned CDs or any blank media (CD-R, DVD-R). Already tried the normal stuff of reseating cables, updating firmware. Any advice?

a lot can depend on BIOS configuration, drives setup [ master/slave, IDE or RAID or SATA ] , your operating system etc. you have not mentioned any of these…so…maybe something in the below can help\\

  1. go through the 10 points listed @ http://www.mrbass.org/dvdnewbie/ [ you may not be a newbie, but the trouble is, and might be related to one or more of the listed items ]. note: very important to keep the transfer mode on IDE channels in DMA mode. check them every now and then as the transfer mode can change without you being notified. see this MS article http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx

  2. a) know your drive’s capabilities. use nero info tool to discover them. also go to the drive maker’s website and find out what media types and brands, and at what speed to those media types, the drive supports. [ eg., my pioneers 107d & 108a can burn to dvd-rw @ 4x without trouble, but my optorite 401 can only burn @ 2x to dvd-rw even though Nero and other burning programs will allow the drive to burn @ 4x and will produce a “successfull” disc @ 4x…but the result is a coaster ] b) update the firmware of the drive. check for updates @ http://forum.rpc1.org/dl_all.php

  3. a) try another brand of CD/DvD disc. b) try burning at lower speed. eg., don’t burn at 24x to 16x media; burn according to MEDIA speed limits, don’t try to burn at the cd/dvd drive’s max speed until you are certain that you can do so without negative consequences.

  4. a) disable and/or uninstall any virtual drives. b) install an aspi layer. preferred is v460. get it @ http://www.snapfiles.com/get/aspilayer.html

  5. a) update the burning program you are using to the latest release. b) uninstall any recently installed software. c) do a virus scan, and a scan with spybot s & d [ get it @ http://www.safer-networking.org/en/index.html ]

  6. for XP or Win2K users, optimise your operating system Services for best system performance. for info go to http://www.blackviper.com/WinXP/service411.htm#Alerter and http://www.freeware-alternative.uni.cc/downloads/service-controller-xp/service-controller-xp.html

  7. before burning, open taskmanager and shutdown ALL unneeded processes that are running. DON’T commence a virus scan or a defrag before or during a burn - sadly, i have seen it happen !

  8. a) try another burning software and see if you get a better result. deepburner standard is free. get it @ http://www.deepburner.com/ b) for users of alcohol 120%, update to the latest drives support DLL [ look for topic “Alcohol 120% Device Support Patch Released” @ http://forum.alcohol-soft.com/index.php?showforum=10 ] c) if you have multiple burning softwares installed, uninstall them all, then install one. test it. install another if needed. test it, and so on…

  9. make sure mainboard chipset drivers are up to date. make sure all cables and jumpers connected to drives are correctly configured with regard to master/slave setup.

  10. enter your BIOS and disable anything you don’t use. set memory speeds to default. set cpu speed to default. if you overclock, DON’T [ until you are certain that overclocking is not the cause of the trouble ].

  11. if you still cannot fix the problem, try the drive or the CD/DvD disc you are having problems with in another PC that has no burning issues [ if possible ]

  12. Disable autorun…unless you really need it for some purpose. for XP users go to start/run/type REGEDIT.EXE then click OK
    press Ctrl+F, type NoDriveTypeAutoRun in the box/find next
    doubleclick the highlighted key and replace the HEX value with b5
    repeat for each NoDriveTypeAutoRun key found. reboot.

Ghosters: Thanks for the help! I have worked my way through the top two on your list and can now at least burn a DVD. It still won’t recognize CDs however. I will work my way through the rest of your list. Thanks again!!

getting there :slight_smile: