Device not available (Pioneer DVR-215D)

vbimport

#1

[qanda]This thread is about the Pioneer DVR-215D. Click here to see full specs[/qanda]Since a couple of weeks, after months of using Win Vista ultimate x64, I’m experiencing unexplainable problems (for me) while burning DVDs under Nero :a

I first thought the problem was due to my previous OptiArc AD-7173S, because when I ran some tests with a Plextor PX-810SA from work I didn’t notice any problems.
The OptiArc just hung while burning at random moments and after 10-15 minutes Nero gave a timeout.
I explained my case and tests to the shop where I got the OptiArc and they agreed to trade it with Pioneer DVR-215D (that Plextor is a rebranded Pioneer, but only cheaper ;)).

At first I had no problems with the Pioneer, but the 5th or 6th burn also crashed. Now another error message: “Device not available”.
Apparently the drive ‘crashes’, also at random moments, and is unmounted from Vista. I need to restart the PC to make it available again.
I replaced the SATA cable in the meantime (you never know), but no solution.

While burning I’m not stressing my PC. Mostly I’m only browsing some webpages, but certainly nothing disc intensive.
I always burn at 8x, and I’ve tried 2 different disc brands: my previous spindle was from Memorex 16x, the current is Verbatim 16x.

I hope somebody can make some sense to this… I’m out of idea’s :confused:

An extract from my Nero logfile


Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1

Recorder:             <PIONEER DVD-RW  DVR-215D>Version: 1.19 - HA 1 TA 1 - 8.3.2.1
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2000kB
 Bus Type      :      default
CD-ROM:               <ATAPI    DVD D  DH16DYS  >Version: XH31 - HA 1 TA 0 - 8.3.2.1
 Adapter driver:      <Serial ATA>              HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
ATAPI DVD D  DH16DYS       F:   CdRom0
=======================

AutoRun : 0
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 4094MB (4192512kB)
Free physical memory: 2610MB (2673576kB)
Memory in use       : 36 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

15.7.2008
ISO compilation
17:55:13	#1 Text 0 File SCSIPTICommands.cpp, Line 450
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
17:55:13	#2 Text 0 File Isodoc.cpp, Line 6713
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
17:55:13	#3 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
17:55:14	#4 Text 0 File Burncd.cpp, Line 3568
	Turn on Disc-At-Once, using DVD media
	
17:55:14	#5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
	FS Settings: using validator 'CUDFSettingsValidatorDVD'
	ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
	Changing UDF revision from '1.02' to '1.02'
	
17:55:14	#6 Text 0 File DlgWaitCD.cpp, Line 311
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2140351 (475:38.01, 4180MB)
	
17:55:14	#7 Text 0 File DlgWaitCD.cpp, Line 323
	Write in overburning mode: NO (enabled: CD)
	
17:55:14	#8 Text 0 File DlgWaitCD.cpp, Line 2932
	Recorder: PIONEER DVD-RW  DVR-215D, Media type: DVD+R
	 Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 7
	
17:55:14	#9 Text 0 File DlgWaitCD.cpp, Line 497
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
17:55:14	#10 Text 0 File ThreadedTransferInterface.cpp, Line 754
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2140352 (2140352) = #2140352/475:38.2
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140352 blocks [G: PIONEER DVD-RW  DVR-215D]
	--------------------------------------------------------------
	
17:55:14	#11 Text 0 File ThreadedTransferInterface.cpp, Line 956
	Prepare [G: PIONEER DVD-RW  DVR-215D] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4383440896, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2140352 |        0 | 0x00
	  2140352 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
17:55:14	#12 Text 0 File SCSIPTICommands.cpp, Line 240
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
17:55:14	#13 Text 0 File Burncd.cpp, Line 4359
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
17:55:14	#14 Phase 24 File dlgbrnst.cpp, Line 1767
	Caching of files started
	
17:55:14	#15 Text 0 File Burncd.cpp, Line 4481
	Cache writing successful.
	
17:55:14	#16 Phase 25 File dlgbrnst.cpp, Line 1767
	Caching of files completed
	
17:55:14	#17 Phase 36 File dlgbrnst.cpp, Line 1767
	Burn process started at 8x (11.080 KB/s)
	
17:55:14	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
17:55:15	#19 Text 0 File Cdrdrv.cpp, Line 10164
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:          26053F h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: MCC.....
	  Media type ID: 004
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..783]:
	    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
	    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
	    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	    01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01    ..88.,Z...#.....
	    00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00    ...,Z...#.......
	    02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00    ..Tp.0c<$.......
	    00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B    ...@fB$........+
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
17:55:15	#20 SPTI -1066 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x0a6b0640: Len x648
	
17:55:15	#21 Text 0 File DVDPlusRW.cpp, Line 675
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
17:55:15	#22 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
18:01:35	#23 SPTI -1114 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
	CDB Data:   0x2A 00 00 1C 5E E0 00 00 20 00 00 00 
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29 
	Buffer x1b5c9480: Len x10000
	0x39 75 01 81 50 E9 72 F6 26 82 F3 06 BE D5 A9 68 
	0xA0 50 78 DE 0C C4 47 E3 78 8C 5E 48 F0 5A BF FA 
	0xBF 38 67 F9 C9 06 B2 26 7A 0A 00 B1 E1 E0 E0 20 
	
18:01:35	#24 CDR -1114 File Writer.cpp, Line 306
	Reset occurred
	G: PIONEER DVD-RW  DVR-215D
	
18:01:35	#25 SPTI -600 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
	CDB Data:   0x35 02 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
18:01:35	#26 SPTI -600 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
	CDB Data:   0x5B 01 06 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
18:01:35	#27 Text 0 File DVDPlusRW.cpp, Line 935
	EndDAO: Last written address 1859296
	
18:01:35	#28 CDR -600 File WriterStatus.cpp, Line 292
	Device not available
	G: PIONEER DVD-RW  DVR-215D
	
18:01:35	#29 TRANSFER -24 File WriterStatus.cpp, Line 292
	Could not perform end of Disc-at-once
	
18:01:35	#30 SPTI -600 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
	CDB Data:   0x5A 00 05 00 00 00 00 00 48 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x061a7f80: Len x48
	
18:01:35	#31 Phase 38 File dlgbrnst.cpp, Line 1767
	Burn process failed at 8x (11.080 KB/s)
	
18:01:35	#32 SPTI -600 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x00) WinError(55) NeroError(-600)
	CDB Data:   0x1E 00 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	
18:01:40	#33 Text 0 File SCSIPTICommands.cpp, Line 287
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
18:01:40	#34 Text 0 File Cdrdrv.cpp, Line 11420
	DriveLocker: UnLockVolume completed
	
18:01:40	#35 Text 0 File SCSIPTICommands.cpp, Line 460
	UnLockMCN - completed with error 55 for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogon
====== *** Nero Burning ROM, History File *** ======


#2

extra info:
In the meantime I also tried CDBurnerXP: it doesn’t recognize the drive… I had the same issue with the OptiArc drive before, however both are on the supported drive list.
After I first had the problems with the OptiArc I’ve reinstalled Vista from scratch.


#3

What is the SATA controller used?


#4

the onboard from the Intel chipset (ICH8?) on my Asus P5B-E motherboard. Sata is set to AHCI in the BIOS.
It worked for months like this…
I can’t try to set it to IDE, 'cause Windows no longer boots if you change it. A reinstall is needed.


#5

nobody??


#6

allright, more info then…

This morning I burnt 3 DVD’s with all relative small JPG’s, no problem at all.

After that I burnt a DVD with 3 large AVI’s (1.4GB each): my computer hung when the burn was around 85% finished. A soft reset was required.

I retried the same burn. In the meantime I was installing TomTom 7 on my PDA. A restart of the device was needed. While doing that Nero gave an error “reset occured” followed by “drive not ready”.

What has a PDA hooked up via USB to do with a writer connected to an internal SATA port??

Windows Vista 6.0
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1

Recorder:             <PIONEER DVD-RW  DVR-215D>Version: 1.19 - HA 1 TA 1 - 8.3.2.1
 Adapter driver:      <Serial ATA>              HA 1
 Drive buffer  :      2000kB
 Bus Type      :      default
CD-ROM:               <ATAPI    DVD D  DH16DYS  >Version: XH31 - HA 1 TA 0 - 8.3.2.1
 Adapter driver:      <Serial ATA>              HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
ATAPI DVD D  DH16DYS       F:   CdRom0
PIONEER DVD-RW  DVR-215D   G:   CdRom1
=======================

AutoRun : 0
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 4094MB (4192512kB)
Free physical memory: 2649MB (2713124kB)
Memory in use       : 35 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

20.7.2008
ISO compilation
10:51:39	#1 Text 0 File SCSIPTICommands.cpp, Line 450
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
10:51:39	#2 Text 0 File Isodoc.cpp, Line 6713
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
10:51:39	#3 ISO9660GEN -11 File Geniso.cpp, Line 3349
	First writeable address = 0 (0x00000000)
	
10:51:39	#4 Text 0 File Burncd.cpp, Line 3568
	Turn on Disc-At-Once, using DVD media
	
10:51:40	#5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
	FS Settings: using validator 'CUDFSettingsValidatorDVD'
	ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
	Changing UDF revision from '1.02' to '1.02'
	
10:51:40	#6 Text 0 File DlgWaitCD.cpp, Line 311
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2140351 (475:38.01, 4180MB)
	
10:51:40	#7 Text 0 File DlgWaitCD.cpp, Line 323
	Write in overburning mode: NO (enabled: CD)
	
10:51:40	#8 Text 0 File DlgWaitCD.cpp, Line 2932
	Recorder: PIONEER DVD-RW  DVR-215D, Media type: DVD+R
	 Disc Manufacturer ID: <MCC>, Media Type ID: <004>, Product revision number: 0
	 Disc Application Code: 0, Extended Information Indicators: 7
	
10:51:40	#9 Text 0 File DlgWaitCD.cpp, Line 497
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
10:51:40	#10 Text 0 File ThreadedTransferInterface.cpp, Line 754
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2140352 (2140352) = #2140352/475:38.2
	    relocatable, disc pos for caching/writing not required/ required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140352 blocks [G: PIONEER DVD-RW  DVR-215D]
	--------------------------------------------------------------
	
10:51:40	#11 Text 0 File ThreadedTransferInterface.cpp, Line 956
	Prepare [G: PIONEER DVD-RW  DVR-215D] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4383440896, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  2140352 |        0 | 0x00
	  2140352 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
10:51:40	#12 Text 0 File SCSIPTICommands.cpp, Line 240
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
10:51:40	#13 Text 0 File Burncd.cpp, Line 4359
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
10:51:40	#14 Phase 24 File dlgbrnst.cpp, Line 1767
	Caching of files started
	
10:51:40	#15 Text 0 File Burncd.cpp, Line 4481
	Cache writing successful.
	
10:51:40	#16 Phase 25 File dlgbrnst.cpp, Line 1767
	Caching of files completed
	
10:51:40	#17 Phase 36 File dlgbrnst.cpp, Line 1767
	Burn process started at 8x (11.080 KB/s)
	
10:51:40	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2673
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
10:51:40	#19 Text 0 File Cdrdrv.cpp, Line 10164
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD+R (10), Part Version: 1.0x (1)
	 Disc Size: 120 mm,      Maximum Transfer Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:          26053F h
	 Data in Burst Cutting Area (BCA) does not exist
	  Disc Application Code: 0 / 0 h
	  Extended Information indicators: 7 h
	  Disc Manufacturer ID: MCC.....
	  Media type ID: 004
	  Product revision number: 0
	  Number of Physical format information bytes in use in ADIP up to byte 63: 56
	 Media Specific [16..783]:
	    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38    ...MCC.....004.8
	    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08    #T7..Tl.._......
	    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00    ................
	    01 00 38 38 02 2C 5A 1A - 05 2E 23 10 04 1E 1D 01    ..88.,Z...#.....
	    00 00 02 2C 5A 1A 05 2E - 23 10 04 1E 1D 01 00 00    ...,Z...#.......
	    02 00 54 70 02 30 63 3C - 24 14 0C 0C 01 20 00 00    ..Tp.0c<$.......
	    00 00 02 40 66 42 24 14 - 0C 0C 01 20 00 00 00 2B    ...@fB$........+
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
10:51:40	#20 SPTI -1066 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
	CDB Data:   0xAC 00 00 00 00 00 00 00 00 64 00 00 
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 
	Buffer x0a2f6880: Len x648
	
10:51:40	#21 Text 0 File DVDPlusRW.cpp, Line 675
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
10:51:40	#22 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
10:58:34	#23 SPTI -600 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
	CDB Data:   0x5C 00 00 00 00 00 00 00 0C 00 00 00 
	Sense Key:  0x00 (KEY_NO_SENSE)
	Sense Code: 0x00
	Sense Qual: 0x00
	Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 
	Buffer x0a16e080: Len xc
	
10:58:34	#24 SPTI -1114 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
	CDB Data:   0x2A 00 00 1C 11 00 00 00 20 00 00 00 
	Sense Key:  0x06 (KEY_UNIT_ATTENTION)
	Sense Code: 0x29
	Sense Qual: 0x00
	Sense Area: 0x70 00 06 00 00 00 00 0E 00 00 00 00 29 
	Buffer x1dec3840: Len x10000
	0x35 F3 54 0C 74 EE 27 8A 6A 6F F3 9D BF 46 59 4B 
	0xFB ED 3D 66 3D B8 4E 3B E7 48 57 5F 96 D4 CB A2 
	0xCD EC 23 FD D1 08 B3 68 37 38 4C 76 DA 7B AB CA 
	
10:58:34	#25 CDR -1114 File Writer.cpp, Line 306
	Reset occurred
	G: PIONEER DVD-RW  DVR-215D
	
10:58:34	#26 SPTI -1033 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
	CDB Data:   0x35 02 00 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 01 
	
10:58:34	#27 SPTI -1033 File SCSIPassThrough.cpp, Line 196
	CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1033)
	CDB Data:   0x5B 01 06 00 00 00 00 00 00 00 00 00 
	Sense Key:  0x02 (KEY_NOT_READY)
	Sense Code: 0x04
	Sense Qual: 0x01
	Sense Area: 0x70 00 02 00 00 00 00 0E 00 00 00 00 04 01 
	
10:58:57	#28 Text 0 File DVDPlusRW.cpp, Line 935
	EndDAO: Last written address 1839360
	
10:58:57	#29 CDR -1033 File WriterStatus.cpp, Line 292
	Drive not ready
	G: PIONEER DVD-RW  DVR-215D
	
10:58:57	#30 TRANSFER -24 File WriterStatus.cpp, Line 292
	Could not perform end of Disc-at-once
	
10:58:57	#31 Phase 38 File dlgbrnst.cpp, Line 1767
	Burn process failed at 8x (11.080 KB/s)
	
10:58:57	#32 Text 0 File SCSIPTICommands.cpp, Line 287
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
10:59:01	#33 Text 0 File Cdrdrv.cpp, Line 11420
	DriveLocker: UnLockVolume completed
	
10:59:01	#34 Text 0 File SCSIPTICommands.cpp, Line 450
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
====== *** Nero Burning ROM, History File *** ======

#7

alright, this is really getting on my nerves :a

In the meantime I’ve avoided Nero as much as possible. I tried some other burn software, but there’s nothing out there I really fancy.

  • CdburnerXP => drive not detected. I read their forum and I think the software has problems detecting via SATA AHCI
  • InfraRecorder => same thing
  • ImgBurn => not 1 coaster! (or max 1, not 100% sure), but it’s mainly designed for writing and creating images. For burning individual files/folders it’s not that complete as Nero.

So I just tried Nero again as I wanted to make my monthly backup of software/images/data/settings to DVD and… you guess it… another coaster :Z

The only thing I can image why ImgBurn is so solid is that perhaps it uses some other interface to communicate with my burner?
In the settings I found there is a choice between 5 interfaces, but I kept the default: SPTI - Microsoft.

Is there some way of telling what interface Nero uses, and in case it’s different, can I change it to use SPTI?