Daxon DVD+R

vbimport

#1

[ul]
[/ul] BTC 1008IM f/w 0558 4.36gb data

Media Information
Region information…N/A not a DVD-VIDEO
Media code/Manufacturer ID…DAXON AZ1
Media Product Revision Number…01h
Free Blocks…405405696
Free Capacity…4.38GB(4.70GB)
Book Type…DVD+R
Media Type…DVD+R
Media Id Code Speed…4.0x 5540KBps
Available Write Descriptor…CLV 8.0x 11080KBps
Available Write Descriptor…CLV 6.0x 8310KBps
Available Write Descriptor…CLV 4.0x 5540KBps
Data area starting sector…30000h
Linear Density…0.267um/bit
Track Density…0.74um/track
Number of Layers…1

Full Media Code:

08 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F …&.?
00 00 00 00 00 00 01 44 41 58 4F 4E 00 00 00 41 …DAXON…A
5A 31 01 38 23 54 37 11 00 56 71 00 BE 6B 16 16 Z1.8#T7…Vq…k…
0B 0B 0A 0A 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 …

These discs are sold under the LynkYo brand as 4x +R’s. Burns nearly perfectly @ 4x, will burn 1 out of 4 @6x & 1 out of 6 @ 8x. Plays just fine in my standalone Pioneer DV-333


#2

Daxon DVD+R, rated 4x and sold under the brand name Infiniti in the UK as part of a 25 Disc spindle.

The disc contains 3.31GB data and was burnt using a LiteOn SOHW-832S with VS0A stock firmware. The PI Sum was set to 8 and the PO Sum set to 1 as seems to be the current recommendations in the KProbe guide for version 2.2.3 (the README sticky needs to be updated to match the new KProbe). Scan speed was set to Max.

I only attempted to read the disc in my AOpen 9632 DVD-ROM which works without any problems. This is my first DVD burn since buying the drive and installing it last week

Disc Info:

Disc Type DVD+R
Book Type DVD-ROM
Manufacturer Daxon Inc.
Media ID DAXONAZ1
Protection System None
Region 1,2,3,4,5,6,7,8
Capacity 4.38 GB
Free Size 1.06 GB
Free Blocks 556272
Number of Layers 1
Linear Density 0.267 um/bit
Track Density 0.74 um/track
Maximum Read Speed 6.8x
Maximum Write Speed 4.0x
Current Write Speed 4.0x CLV
Write Speed Performance Descriptor 1 4.0x CLV
Write Speed Performance Descriptor 2 2.4x CLV

Media Code Block:

0000 : a1 0f 02 00 00 03 00 00 00 26 05 3f 00 00 00 00 …&.?..
0010 : 00 00 01 44 41 58 4f 4e 00 00 00 41 5a 31 01 38 …DAXON…AZ1.8
0020 : 23 54 37 11 00 56 71 00 be 6b 16 16 0b 0b 0a 0a #T7…Vq…k…
0030 : 01 19 1b 0c 0c 0c 0d 01 00 00 00 00 00 00 00 00 …
0040 : 01 00 38 38 00 29 60 38 06 30 22 10 08 20 1c 01 …88.)8.0".. .. 0050 : 00 00 00 29 60 38 06 30 22 10 08 20 1c 01 00 00 ...)8.0"… …

KProbe 2.2.3 Scan results attached:



#3

Hear is a scan of my DAXON DVD+R AZ1 written at 4x on a NEC2500A
This disk has been played multiple times in a DVD player over the last 30 days.
Paid £8 for a spindle of 25 at a computer market under the brand name of infinite.

as you can see this is quite a good scan.



#4

This is my attempt with this media also brought from computer market, Infiniti branded Daxon +R AZ1 burned at 4X with 811s hsop patched hacked & media tweeks no bit-setting.
Think ill stay clear from these with this burner.as ive had a few coasters.




#5

here’s mine
bought @ FS canada
$25 on sale for 50 pks
the toppest one , 1st burn
812S @ 832S

I prefer the Maxell (Richo)
http://club.cdfreaks.com/showthread.php?p=724155#post724155

but this one is OK. :slight_smile:



#6

I got the Daxon DVD+R 8x, sold under BenQ last weekends. I will say it’s a nice pc of media you can stock up. :slight_smile: If the quality is consistant, it’s the best performance on my test by LiteOn 1663S(BS0H) so far. :iagree: Pls read my thread here; http://club.cdfreaks.com/showthread.php?t=111824


#7

Sold as “BenQ 8x DVD+R” in 100 Spindle
Burner: BenQ 1620A B7T9
Burn Speed: 8x

So far gone through 1.5 spindles with maybe 3? coasters - I scan all my burns and they all look pretty much like this one - even tried burning a few at 16x without the scans looking much worse (bigger spikes last 25%).



#8

DAXONAZ1, BenQ 4X
Burnt at 4X with Lite-On 401S@411S FS0J (no strat swap)


---------------------------------------------------------------------------
Unique Disc Identifier : [DVD+R:DAXON-AZ1-001]
---------------------------------------------------------------------------
Disc & Book Type :       [DVD+R] - [DVD+R]
Manufacturer Name :      [Daxon Technology Inc.]
Manufacturer ID :        [DAXON]
Media Type ID :          [AZ1]
Product Revision :       [001]
Blank Disc Capacity :    [Not Supported By Method 2]
Recording Speeds :       [1x , 2.4x , 4x]
                         [Method 2 Might Not Always Detect All Speeds]
---------------------------------------------------------------------------
0000 : a1 0f 02 00 00 03 00 00  00 00 00 00 00 00 00 00   ................
0010 : 00 00 01 44 41 58 4f 4e  00 00 00 41 5a 31 01 38   ...DAXON...AZ1.8
0020 : 23 54 37 11 00 56 71 00  be 6b 16 16 0b 0b 0a 0a   #T7..Vq..k......
0030 : 01 19 1b 0c 0c 0c 0d 01  00 00 00 00 00 00 00 00   ................


#9

Benq 8x +R Dazon AZ2

Benq 1640 BSMB

SB - On
OS - On
WOPC - On

Burnt at 8x

Loogs good to me



#10

Wow! That’s a fantastic burn for DAXON AZ2’s! My 1620 gives me 30k-45k PIE’s and 300-600 PIF’s at 8x. I’m impressed how well your 1640 burns this media. Are those results fairly consistent for your typical DAXON AZ2 burns?


#11

Yep, this is consistant. As above



#12

Pioneer 110D crossflashed to Pio 110 1.37

Burnt at 6x (max allowed)



#13

BenQ DVD+R 8x / DAXON AZ2
BenQ1640 - BSMB (WOPC-on;SB-on/on)
ImgBurn 1.1.0.0. @ 8x



#14

BenQ +r Daxon AZ3 16X @16X




#15

And now on the NEC 3550
benQ 16x Daxon AZ3




#16

These daxon AZ3 disc don’t seem to improve at lower speeds.
Here burned @12X on the BQ1620




#17

well I had the following result on Daxon AZ2 8X burned on multisession first session on MSI DR16-B3 with its orginal firmware on 8X speed this was first 4400 MB only last 100MB burnt on the same drive after cross flash it to its orginal Benq DW1640 and used overspeed feature to burn it on 16X supposedly

here the result


#18

BenQ brand 8X DVD+R mid Daxon AZ2 burned @8X
BenQ 1640 flashed to EW164B fw BEGB
WOPC on, SB on, OS off
1st attachment CDSpeed quality scan
2nd attachment K-probe


#19

BenQ brand 8X DVD+R mid Daxon AZ2 burned @8X
NEC ND3550A fw 1.Y4

1st attachment CDSpeed quality scan
2nd attachment K-probe


#20

Benq AZ2 8X burnt@8X
On Benq 1640 BSMB : OS/ON , SB/ON , WOPC/ON :

Transfer Rate :

jubjubbird : How did you manage to get such excellent QS ?