Data verification successful but only readable in another DVD drive

vbimport

#1

so i finally burnt a DVD successfully on a different media but when i reinsert the dvd back into the burner, it is identified as a blank disc and clicking it on windows explorer yields an empty folder.

but when i put it in my other dvd drive, it reads fine. whats going on?

Last burn log


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 585MB (600032kB)
Memory in use       : 42 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:16:16 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:16:16 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:16:16 AM	#3 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:16:16 AM	#4 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:16:23 AM	#5 Phase 40 File dlgbrnst.cpp, Line 1832
	Aborted by user
	
11:16:23 AM	#6 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2375503 (527:53.28, 4639MB)
	
11:16:23 AM	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:16:23 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650
	 Medium not present
	
11:16:23 AM	#9 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Not enough free discspace.
		(Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======
Benjamin Tay
NSAD
1A20-8203-0139-2394-4252-0541*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 497MB (509292kB)
Memory in use       : 51 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:17:40 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:17:40 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:17:40 AM	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1650    running
	
11:17:40 AM	#4 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:17:40 AM	#5 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:17:41 AM	#6 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2017327 (448:17.52, 3940MB)
	
11:17:41 AM	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:17:41 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650, Media type: DVD+R
	
11:17:41 AM	#9 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:17:41 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2017328 (2017328) = #2017328/448:17.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017328 blocks [BENQ     DVD DD DW1650]
	--------------------------------------------------------------
	
11:17:41 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ     DVD DD DW1650] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4131487744, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2017328 | lead-out |   1 |    0x41 | 0x00
	
11:17:41 AM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
11:17:41 AM	#13 Text 0 File Burncd.cpp, Line 4114
	Cache writing successful.
	
11:17:41 AM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
11:17:41 AM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 4x (5,540 KB/s)
	
11:17:41 AM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
11:17:41 AM	#17 SCSI -1066 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0D410600
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x24 0x00 
	
11:17:41 AM	#18 CDR -1207 File DVDR.cpp, Line 4946
	Book Type automatically set to: Current recorder setting
	
11:17:41 AM	#19 Text 0 File DVDPlusRW.cpp, Line 655
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:18:31 AM	#20 SCSI -1176 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0CB80000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x01
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x01 
	
11:18:31 AM	#21 CDR -1176 File Writer.cpp, Line 311
	Session fixation error
	
11:18:32 AM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
11:18:32 AM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
11:18:32 AM	#24 Phase 127 File dlgbrnst.cpp, Line 1832
	Generating DVD high compatibility borders
	
11:18:32 AM	#25 Phase 129 File dlgbrnst.cpp, Line 1832
	Generating DVD borders completed successfully
	
11:18:32 AM	#26 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 4x (5,540 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======
Benjamin Tay
NSAD
1A20-8203-0139-2394-4252-0541*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 580MB (594636kB)
Memory in use       : 43 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:20:31 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : TRUE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:20:31 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:20:31 AM	#3 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:20:31 AM	#4 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:20:31 AM	#5 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2017327 (448:17.52, 3940MB)
	
11:20:31 AM	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:20:31 AM	#7 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650, Media type: DVD+R
	
11:20:31 AM	#8 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:20:31 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2017328 (2017328) = #2017328/448:17.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017328 blocks [BENQ     DVD DD DW1650]
	--------------------------------------------------------------
	
11:20:34 AM	#10 Phase 40 File dlgbrnst.cpp, Line 1832
	Aborted by user
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======
Benjamin Tay
NSAD
1A20-8203-0139-2394-4252-0541*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 598MB (612796kB)
Memory in use       : 41 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:25:22 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : TRUE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:25:22 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:25:22 AM	#3 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:25:22 AM	#4 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:25:22 AM	#5 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2017327 (448:17.52, 3940MB)
	
11:25:22 AM	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:25:22 AM	#7 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650, Media type: DVD+R
	
11:25:22 AM	#8 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:25:22 AM	#9 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2017328 (2017328) = #2017328/448:17.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017328 blocks [BENQ     DVD DD DW1650]
	--------------------------------------------------------------
	
11:27:34 AM	#10 Phase 40 File dlgbrnst.cpp, Line 1832
	Aborted by user
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======
Benjamin Tay
NSAD
1A20-8203-0139-2394-4252-0541*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 508MB (520580kB)
Memory in use       : 50 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:27:46 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : TRUE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:27:46 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:27:46 AM	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1650    running
	
11:27:46 AM	#4 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:27:47 AM	#5 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:28:08 AM	#6 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2017327 (448:17.52, 3940MB)
	
11:28:08 AM	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:28:08 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650, Media type: DVD+R
	
11:28:08 AM	#9 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	Insert empty disc to write to.
		(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
	
11:28:08 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2017328 (2017328) = #2017328/448:17.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017328 blocks [BENQ     DVD DD DW1650]
	--------------------------------------------------------------
	
11:28:12 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ     DVD DD DW1650] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4131487744, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2017328 | lead-out |   1 |    0x41 | 0x00
	
11:28:12 AM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
11:28:13 AM	#13 Text 0 File Burncd.cpp, Line 4114
	Cache writing successful.
	
11:28:13 AM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
11:28:13 AM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 2.4x (3,324 KB/s)
	
11:28:13 AM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
11:28:13 AM	#17 SCSI -1066 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x04435800
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x24 0x00 
	
11:28:13 AM	#18 CDR -1207 File DVDR.cpp, Line 4946
	Book Type automatically set to: Current recorder setting
	
11:28:13 AM	#19 Text 0 File DVDPlusRW.cpp, Line 655
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:28:38 AM	#20 SCSI -1176 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0CE00000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x01
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x01 
	
11:28:38 AM	#21 CDR -1176 File Writer.cpp, Line 311
	Session fixation error
	
11:28:38 AM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
11:28:38 AM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
11:28:39 AM	#24 Phase 127 File dlgbrnst.cpp, Line 1832
	Generating DVD high compatibility borders
	
11:28:39 AM	#25 Phase 129 File dlgbrnst.cpp, Line 1832
	Generating DVD borders completed successfully
	
11:28:39 AM	#26 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 2.4x (3,324 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======
Benjamin Tay
NSAD
1A20-8203-0139-2394-4252-0541*

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.99 12:06:00 PM 
ahead WinASPI: File 'C:\Program Files\Ahead
ero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27.10.04 12:35:32 AM 
Nero Version: 6.6.0.14
Internal Version: 6, 6, 0, 14d
 (Nero Express)
Recorder:             <BENQ DVD DD DW1650>      Version: BCHC - HA 0 TA 0 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ATAPI 
CD-ROM:               <LITE-ON  DVD SOHD-16P9S  >Version: FS07 - HA 0 TA 1 - 6.6.0.14
 Adapter driver:      <atapi>                   HA 0

=== Scsi-Device-Map ===
CdRomPeripheral      : BENQ DVD DD DW1650               atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : LITE-ON DVD SOHD-16P9S           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : Maxtor 6Y120M0                   atapi Port 1 ID 0  DMA: On 
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 0  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 1  DMA: Off
CdRomPeripheral      : CA3551W EEC543I         1.0     dtscsi Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
BENQ DVD DD DW1650         F:   CDRom0
LITE-ON DVD SOHD-16P9S     G:   CDRom1
CA3551W EEC543I            I:   CDRom2
CA3551W EEC543I            J:   CDRom3
CA3551W EEC543I            K:   CDRom4
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1023MB (1047852kB)
Free physical memory: 495MB (507752kB)
Memory in use       : 51 
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

30.12.2006
ISO compilation
11:46:26 AM	#1 Text 0 File Isodoc.cpp, Line 6314
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
11:46:26 AM	#2 Text 0 File Reader.cpp, Line 127
	Reader running
	
11:46:26 AM	#3 Text 0 File Writer.cpp, Line 122
	Writer BENQ     DVD DD DW1650    running
	
11:46:26 AM	#4 ISO9660GEN -11 File geniso.cpp, Line 3297
	First writeable address = 0 (0x00000000)
	
11:46:27 AM	#5 Text 0 File Burncd.cpp, Line 3230
	Turn on Disc-At-Once, using DVD media
	
11:46:27 AM	#6 Text 0 File DlgWaitCD.cpp, Line 267
	Last possible write address on media:  2295103 (510:01.28, 4482MB)
	Last address to be written:            2017327 (448:17.52, 3940MB)
	
11:46:27 AM	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Write in overburning mode: NO (enabled: CD)
	
11:46:27 AM	#8 Text 0 File DlgWaitCD.cpp, Line 2433
	Recorder: BENQ DVD DD DW1650, Media type: DVD+R
	
11:46:27 AM	#9 Text 0 File DlgWaitCD.cpp, Line 445
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:46:27 AM	#10 Text 0 File ThreadedTransferInterface.cpp, Line 830
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2017328 (2017328) = #2017328/448:17.53
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2017328 blocks [BENQ     DVD DD DW1650]
	--------------------------------------------------------------
	
11:46:27 AM	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
	Prepare recorder [BENQ     DVD DD DW1650] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4131487744, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2017328 | lead-out |   1 |    0x41 | 0x00
	
11:46:27 AM	#12 Phase 24 File dlgbrnst.cpp, Line 1832
	Caching of files started
	
11:46:27 AM	#13 Text 0 File Burncd.cpp, Line 4114
	Cache writing successful.
	
11:46:27 AM	#14 Phase 25 File dlgbrnst.cpp, Line 1832
	Caching of files completed
	
11:46:27 AM	#15 Phase 36 File dlgbrnst.cpp, Line 1832
	Burn process started at 2.4x (3,324 KB/s)
	
11:46:27 AM	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
11:46:27 AM	#17 SCSI -1066 File Cdrdrv.cpp, Line 1182
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0D060600
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
	Sense Code: 0x24
	Sense Qual: 0x00
	CDB Data:   0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 
	Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x24 0x00 
	
11:46:27 AM	#18 CDR -1207 File DVDR.cpp, Line 4946
	Book Type automatically set to: Current recorder setting
	
11:46:27 AM	#19 Text 0 File DVDPlusRW.cpp, Line 655
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:46:56 AM	#20 SCSI -1176 File Cdrdrv.cpp, Line 1436
	SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0C8C0000
	Status:     0x04 (0x01, SCSI_ERR)
	HA-Status   0x00 (0x00, OK)
	TA-Status   0x02 (0x01, SCSI_TASTATUS_CHKCOND)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x72
	Sense Qual: 0x01
	CDB Data:   0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 
	Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 
	            0x00 0x00 0x00 0x00 0x72 0x01 
	
11:46:56 AM	#21 CDR -1176 File Writer.cpp, Line 311
	Session fixation error
	
11:46:57 AM	#22 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
11:46:57 AM	#23 Text 0 File ThreadedTransfer.cpp, Line 222
	conversion idle, stopping reader
	
11:46:57 AM	#24 Phase 127 File dlgbrnst.cpp, Line 1832
	Generating DVD high compatibility borders
	
11:46:57 AM	#25 Phase 129 File dlgbrnst.cpp, Line 1832
	Generating DVD borders completed successfully
	
11:46:57 AM	#26 Phase 38 File dlgbrnst.cpp, Line 1832
	Burn process failed at 2.4x (3,324 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.99 12:06:00 PM 
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02.11.02 9:53:04 AM 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.05 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03.08.04 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 

====== *** Nero-Burning Rom, History File *** ======

disc info in dvd burner drive

Nero CD-DVD Speed: Disc Info
Basic Information
 Disc type:           : DVD-R
 Book Type            : DVD-R
 Manufacturer:        :  unknown
 MID                  : fx€YG02
 Write speeds:        : 2.4 X - 4 X - 8 X
 Blank Capacity       : 4.38 GB
                      : 4488 MB
                      : 4706076672 bytes
Extended Information
 Layers               : 1
 Usage                : Authoring
 Copyright protection : n/a
 Recorder information
 Disc Status          : Empty
Raw Data
Pre-recorded Information in Lead-in (0Eh)
0000 - 01 01 40 C1 FD 9E D8 00 02 52 00 02 87 0D 10 00 - ..@......R......
0010 - 03 66 78 80 00 03 54 00 04 59 47 30 32 00 00 00 - .fx...T..YG02...
0020 - 05 04 00 00 00 00 00 00 67 04 D7 77 30 88 D4 77 - ........g..w0..w
0030 - FF FF FF FF 2A 88 D4 77 3F C6 D4 77 00 00 00 00 - ....*..w?..w....
0040 - 4F E5 D6 77 60 08 C3 02 03 00 00 00 00 00 00 00 - O..w`...........
0050 - 0A 00 1E 00 00 00 00 00 00 00 00 00 60 BB 11 00 - ............`...
0060 - 60 BB 11 00 98 08 11 00 B0 08 11 00 00 00 15 00 - `...............

disc info in normal dvd drive


Nero CD-DVD Speed: Disc Info
Basic Information
 Disc type:    : CD-R
 Manufacturer: : Plasmon
 MID           : 97m27s18f
 Write speeds: : 12 X - 16 X
 Capacity:     : 25:02.00
               : 220 MB
Extended Information
 Usage         : General
 Disc Status   : Open
Raw Data
ATIP
0000 - D0 00 A0 00 61 1B 12 00 19 02 00 00 00 00 00 00 - ....a...........
0010 - 00 00 00 00 00 00 00 00                         - ........

actually wait, after further testing, it would appear that my dvd burner wont read ANY discs at all now. I shall reboot in a few days and will update.


#2

The info you posted above is from two different discs; one a CD and the other a DVD.


#3

thats whats weird. the correct reading, the 2nd one, detects it rightfully as a CD but the burner detects it as a DVD. Well Its settled. Twas just a matter of rebooting. Well i surely wasted the forum new topic pool.