Data Verification Failure on DVD-R DL using LG GSA-H10N

Hi there,
I have encountered on nero 7.5.7.0, data verification failure on verbatim dvd-r DL using my LG GSA-H10N burner all the time.
All looks fine when it says “Burn process completed successfully” but after doing data verification, it says “Data verification failed”. I even tested the disc on my panasonic home theatre. It managed to play the first few chapters but after that it couldnt move on to the next chapter. I have been trying to burn 7gb dvd movies that i downloaded over the net to these discs but all this while, they have been unsuccessful. Here is a copy of the log. Please help me.

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 21/11/2005 PM 1:48:21
ahead WinASPI: File ‘D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 PM 1:54:32

NT-SPTI used
Nero Version: 7.5.7.0
Internal Version: 7, 5, 7, 0

Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL12 - HA 1 TA 0 - 7.5.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <YW3318J MCR975B >Version: 3.0 - HA 1 TA 2 - 7.5.7.0
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3320620AS atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 5 ID 0 DMA: On
CdRomPeripheral : YW3318J MCR975B 3.0 a09jpozp Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H10N E: CDRom0
TSSTcorp CD/DVDW TS-H552U F: CDRom1
YW3318J MCR975B G: CDRom2

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1519MB (1555760kB)
Free physical memory: 779MB (798292kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.6.2007
UDF/ISO compilation
PM 4:54:56 #1 Text 0 File SCSIPassThrough.cpp, Line 583
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

PM 4:54:56 #2 Phase 112 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation started

PM 4:54:56 #3 Phase 114 File dlgbrnst.cpp, Line 1746
DVD-Video files reallocation completed (no file modified)

PM 4:54:56 #4 Text 0 File Isodoc.cpp, Line 6508
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

PM 4:54:56 #5 Phase 111 File dlgbrnst.cpp, Line 1746
DVD-Video files sorted

PM 4:54:56 #6 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)

PM 4:54:56 #7 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)

PM 4:54:56 #8 Text 0 File Burncd.cpp, Line 3435
Turn on Disc-At-Once, using DVD media

PM 4:54:56 #9 Text 0 File DlgWaitCD.cpp, Line 301
Last possible write address on media: 4171711 (927:02.61, 8147MB)
Last address to be written: 4171583 (927:01.08, 8147MB)

PM 4:54:56 #10 Text 0 File DlgWaitCD.cpp, Line 313
Write in overburning mode: NO (enabled: CD DVD)

PM 4:54:56 #11 Text 0 File DlgWaitCD.cpp, Line 2863
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD-R Dual Layer
Disc Manufacturer: MKM 01 - RD30
Disc Application Code: 2, Disc Physical Code: 145

PM 4:54:56 #12 Text 0 File DlgWaitCD.cpp, Line 485
>>> Protocol of DlgWaitCD activities: <<<
=========================================

PM 4:54:56 #13 Text 0 File ThreadedTransferInterface.cpp, Line 820
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4171584 (4171584) = #4171584/927:1.9
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4171584 blocks [Main]
--------------------------------------------------------------

PM 4:54:56 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1033
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8543404032, ISRC “”
DAO layout:
===========
__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 4171584 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4171584 | 0 | 0x00
4171584 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

PM 4:54:56 #15 Text 0 File SCSIPassThrough.cpp, Line 41
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

PM 4:54:57 #16 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 6x (8,310 KB/s)

PM 4:54:57 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2730
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

PM 4:54:57 #18 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: - (6), Extended Part Version: 3.0 (48)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCC8FF h
End Sector Number in Layer 0: 22EF5F h (LBN: 1FEF5F h, 4087 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16…63]:
00 10 00 00 00 00 00 00 - 00 00 00 30 00 00 00 00 …0…
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

PM 4:54:57 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 908
Burning Layer 1

PM 4:54:57 #20 Text 0 File DVDPlusDualLayer.cpp, Line 951
Calculated last LBA on L0: 2092831 ( 1FEF1Fh), first LBA on L1: 2092960 ( 1FEFA0h) -> ok (0)
Reserved Track size for LJR: 4171584 ( 3FA740h, 8147MB) -> return code 0
Read last LBA on L0: 2092831 ( 1FEF1Fh), first LBA on L1: 2092960 ( 1FEFA0h) -> ok (0)
Start writing layer 1 at address 0 (0h)
Recording mode: Layer Jump Recording Mode, start write address at LBA 0
Last LBA on L0: 2092831 (1FEF1Fh), first LBA on L1: 2092960 (1FEFA0h)
From TrackInfo: last LJ: 0 (0h), next LJ: 2092831 (1FEF1Fh)

PM 5:07:32 #21 CDR -1206 File DVDPlusDualLayer.cpp, Line 1947
Burning Layer 2

PM 5:07:32 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1958
Perform layer 1 to 2 jump before writing at address 2092960 (1FEFA0h)
Old contiguos LBA: 2092832 (1FEF20h)

PM 5:19:51 #23 Text 0 File WriterStatus.cpp, Line 112
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 4171584 (3FA740h), length 0 blocks

PM 5:21:39 #24 Text 0 File DVDPlusDualLayer.cpp, Line 1128
LJR: EndTrack 1: Last written address was 4171711

PM 5:21:39 #25 Phase 37 File dlgbrnst.cpp, Line 1746
Burn process completed successfully at 6x (8,310 KB/s)

PM 5:21:39 #26 Phase 78 File dlgbrnst.cpp, Line 1746
Data verification started

PM 5:36:33 #27 SectorVerify 10 File Cdrdrv.cpp, Line 10423
Sectors from 2092832 to 4171583 on disc are different to source

PM 5:36:33 #28 Phase 81 File dlgbrnst.cpp, Line 1746
Data verification failed

PM 5:36:33 #29 Text 0 File Cdrdrv.cpp, Line 10459
DriveLocker: UnLockVolume completed

PM 5:36:33 #30 Text 0 File SCSIPassThrough.cpp, Line 583
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 25/8/2006 AM 11:47:00
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/11/2005 PM 1:48:21
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.33a, size=36528 bytes, created 25/8/2006 AM 11:47:00 (Prassi/Veritas driver for win 2K)
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 4/8/2004 AM 9:07:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

You should burn DL media by using Imgburn…

And for useful verification use Nero cd dvd speed.

You could try burning the disc at the rated 4x as well as following chef’s advice, and using ImgBurn :slight_smile:

Hi there, but i have only VIDEO_TS folder. I did not copy it as an image. So how do i go about burning using ImgBurn? Should i set the booktype in ImgBurn to DVD ROM or normal?

I would like to know is DVD+R DL or DVD-R DL more compatible with home dvd player? Does it really make a difference is the first place?

Then use the BUILD MODE in Imgburn.

Under the file system, which one should i choose? Are there anything that i should change as well to make it more compatible?

Where?

UDF 1.02 is most compatible.

Should i use dvd+r dl or dvd-r dl as the media so that i can play it on my dvd player? my burner supports both format.

Verbatim Dvd+R DL, Made in Singapore. Set Booktype for Dvd+R DL media to Dvd-Rom.

You can use the mediatype you want, but stay on the safe side and only use [B]Verbatim DL[/B] and use [B]Imgburn[/B]. :slight_smile: