Data verification failed again and again

I’ve been having this problem for weeks now…and no matter what i do i can’t seem to find a solution! I had an lg drive (here is my post about it http://club.cdfreaks.com/showthread.php?t=223529) after not being able to fix this…i bought an Samsung SH-S182M…the same problem still exists! The burn is successfully completed and the data verification always fails! I’ve been only using nero…this time i tried ImgBurn …hopefully someone can help!!! :sad:

Here is the imgBurn log

I 22:44:18 Operation Started!
I 22:44:18 Source File: C:\Download\Ghost Recon Advanced Warfighter 2\sr-graw2.iso
I 22:44:18 Source File Sectors: 1,754,060 (MODE1/2048)
I 22:44:18 Source File Size: 3,592,314,880 bytes
I 22:44:18 Source File Volume Identifier: GRAW2_INST
I 22:44:18 Source File Implementation Identifier: ultraiso
I 22:44:18 Source File File System(s): UDF (1.02)
I 22:44:18 Destination Device: [0:0:0] TSSTcorp CD/DVDW SH-S182M SB05 (D:) (ATA)
I 22:44:18 Destination Media Type: DVD+R (Disc ID: MJC-005-00) (Speeds: 4x, 8x, 12x, 16x)
I 22:44:18 Destination Media Sectors: 2,295,104
I 22:44:18 Write Mode: DVD
I 22:44:18 Write Type: DAO
I 22:44:18 Write Speed: MAX
I 22:44:18 Link Size: Auto
I 22:44:18 Test Mode: No
I 22:44:18 BURN-Proof: Enabled
I 22:44:20 Filling Buffer… (40 MB)
I 22:44:21 Writing LeadIn…
I 22:44:47 Writing Image… (LBA: 0 - 1754059)
I 22:49:12 Synchronising Cache…
I 22:49:19 Closing Track…
I 22:49:22 Finalising Disc…
I 22:49:38 Image MD5: 9b4d73f94971747820fc83ef2f5f04ef
I 22:49:38 Operation Successfully Completed! - Duration: 00:05:20
I 22:49:38 Average Write Rate: 13,238 KB/s (9.6x) - Maximum Write Rate: 19,710 KB/s (14.2x)
I 22:49:38 Cycling Tray before Verify…
W 22:49:45 Waiting for device to become ready…
I 22:50:01 Device Ready!
I 22:50:01 Operation Started!
I 22:50:01 Source Device: [0:0:0] TSSTcorp CD/DVDW SH-S182M SB05 (D:) (ATA)
I 22:50:01 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: MJC-005-00) (Speeds: 4x, 8x, 12x, 16x)
I 22:50:01 Image File: C:\Download\Ghost Recon Advanced Warfighter 2\sr-graw2.iso
I 22:50:01 Image File Sectors: 1,754,060 (MODE1/2048)
I 22:50:01 Image File Size: 3,592,314,880 bytes
I 22:50:01 Image File Volume Identifier: GRAW2_INST
I 22:50:01 Image File Implementation Identifier: ultraiso
I 22:50:01 Image File File System(s): UDF (1.02)
I 22:50:01 Verifying Sectors… (LBA: 0 - 1754059)
W 22:57:05 Failed to Read Sector 1506816 - Timeout on Logical Unit
W 22:57:05 Sector 1506816 maps to File: data2.cab
W 22:57:13 Failed to Read Sector 1506817 - Timeout on Logical Unit
W 22:57:13 Sector 1506817 maps to File: data2.cab
W 22:57:21 Failed to Read Sector 1506818 - Timeout on Logical Unit
W 22:57:21 Sector 1506818 maps to File: data2.cab
W 22:57:47 Failed to Read Sector 1506819 - Timeout on Logical Unit
W 22:57:47 Sector 1506819 maps to File: data2.cab
E 22:57:55 Failed to Read Sector 1506820 - Timeout on Logical Unit
E 22:57:55 Sector 1506820 maps to File: data2.cab
E 22:57:55 Failed to Verify Sectors!
E 22:57:55 Operation Failed! - Duration: 00:07:53
I 22:57:55 Average Verify Rate: 6,371 KB/s (4.6x) - Maximum Verify Rate: 18,825 KB/s (13.6x)

I 22:44:18 Destination Media Type: DVD+R (Disc ID: [B]MJC-005-00[/B]) (Speeds: 4x, 8x, 12x, 16x)

MJC M005 seems to not be a good disc for burning at high speeds, but only by looking at this post [the leftmost image shows that the disc was not recommended for burning above 4x]. Try burning at slow speeds and see if it can verify properly.

If you’ve been having the problem for weeks then it’s almost certain that your downlaoded image is corrupt.

Make a fresh image from your original dvd (once you’ve bought it) and please re-read the forum rules before posting again.