Data Verification Errors after complete burn (Nero on PX-716SA)

vbimport

#1

Hi all,

I’am crazy until that i burn Verbatim DVD-R with Nero v6.6.0.6…
I’m using :

DVD Burner : PX-716 SA (S-ATA with lastest firmware 1.09)
Motherboard : Gigabyte GA-8KNXP
Chipset : Intel i875
RAM Memory : 1 Gb

Nero says to me in verify mode that sectors from xxxxxxx to xxxxxxx on disc are different to source :a

I have retry to burn in 4x, 8x, 12x, 16x (with or without BurnProof feat.)… it’s the same result 9/10 with ramdom sectors.
The content is a new compilation that i made each time for burning some divx with UDF/ISO format, file system ISO 9660 + Joliet (version UDF 1.02).

You can find below the Nero’s log file @ x4 speed on Verbatim 16x Certified “Advanced AZO+” DVD-R :

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 14:06:00
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 16:21:30
Nero Version: 6.6.0.6
Recorder: <PLEXTOR DVDR PX-716A> Version: 1.09 - HA 4 TA 0 - 6.6.0.6
Adapter driver: <SI3112> HA 4
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1612>Version: X004 - HA 3 TA 1 - 6.6.0.6
Adapter driver: <atapi> HA 3

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD360GD-00FNA0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3200822AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD RW 4XMax atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1612 atapi Port 3 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-716A 1.09 SI3112 Port 4 ID 0 DMA: Off
DiskPeripheral : IC35L120AVVA07-0 VA6O iteraid Port 5 ID 1 DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD RW 4XMax F: CDRom1
TOSHIBA DVD-ROM SD-M1612 T: CDRom2
PLEXTOR DVDR PX-716A E: CDRom0

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 488MB (500712kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.6.2006
Compilation UDF/ISO
23:15:36 #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

23:15:36 #2 Text 0 File Reader.cpp, Line 127
Reader running

23:15:36 #3 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-716A running

23:15:36 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

23:15:37 #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

23:15:37 #6 Text 0 File Burncd.cpp, Line 3155
Turn on Disque entier, using DVD media

23:15:37 #7 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2152671 (478:22.21, 4204MB)

23:15:37 #8 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

23:15:37 #9 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PLEXTOR DVDR PX-716A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

23:15:37 #10 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:15:37 #11 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2152672 (2152672) = #2152672/478:22.22
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2152672 blocks [PLEXTOR DVDR PX-716A]
--------------------------------------------------------------

23:15:37 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4408672256, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2152672 | lead-out | 1 | 0x41 | 0x00

23:15:37 #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

23:15:37 #14 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

23:15:37 #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

23:15:37 #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 Ko/s)

23:15:37 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:15:37 #18 Text 0 File DVDR.cpp, Line 2300
Recording mode: Sequential Recording Mode

23:15:37 #19 Text 0 File Mmc.cpp, Line 21079
Set BUFE: BURN-Proof -> ON

23:15:37 #20 Text 0 File DVDR.cpp, Line 2441
Start write address at LBA 0
DVD high compatibility mode: Yes

23:15:37 #21 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

23:15:41 #22 Text 0 File Cdrdrv.cpp, Line 1284
23:15:41.078 - PLEXTOR DVDR PX-716A\H4 T0 : Queue again later

23:16:21 #23 Text 0 File Cdrdrv.cpp, Line 1284
23:16:21.078 - PLEXTOR DVDR PX-716A\H4 T0 : Queue again later

23:29:39 #24 Text 0 File WriterStatus.cpp, Line 116
<PLEXTOR DVDR PX-716A > start writing Lead-Out at LBA 2152672 (20D8E0h), lenght 0 blocks

23:29:39 #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:29:39 #26 Text 0 File DVDR.cpp, Line 2682
EndDAO: Last written address was 2152671

23:30:15 #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 Ko/s)

23:30:15 #28 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

23:34:49 #29 SectorVerify 11 File Cdrdrv.cpp, Line 9337
Sector 179647 on disc has different content to source

23:34:49 #30 SectorVerify 10 File Cdrdrv.cpp, Line 9337
Sectors from 1340574 to 1340575 on disc are different to source

23:35:18 #31 SectorVerify 11 File Cdrdrv.cpp, Line 9337
Sector 1340959 on disc has different content to source

23:37:24 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

23:37:24 #33 SectorVerify 10 File Cdrdrv.cpp, Line 9337
Sectors from 1540254 to 1540255 on disc are different to source

23:37:24 #34 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 23:07:32
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 14:06:00
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.51a, size=17136 bytes, created 23/06/2003 10:58:16 (Prassi/Veritas driver for win 2K)
File ‘Drivers\SI3112.sys’: Ver=1, 3, 61, 0, size=62208 bytes, created 06/09/2005 13:02:50 (Adapter driver for rec)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 07:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
HKLM\System\CurrentControlSet\Services\SI3112\Parameters\Device
SI3112 - NumberOfRequests 64 (recommended: 0)

Does someone have any idea of what’s going wrong ?
Does someone is knowing if the verify mode of Nero is really good ?

Thanks in advance for your help :bow: :bow:

Regards


#2

[I]TheDark[/I], please do not crosspost. It is against forum’s rules. :cop:

Thanks, and welcome to the forums. :slight_smile:

ET