The casino was good to me on Friday night. so I got some Crucial Ballistix Tatical DDR3 1866mhz RAM 2X4GB for $40usd, I picked up two sets from Fry's http://www.frys.com/product/7147542?site=sa:adpages page:Sun_p33
Well I go and install it an Saturday and BIG BSOD! Crud! I messed with it for a bit and still one big pain in the "A" BSOD. I ran memtest for an hour and it came up with a lot of errors. So I took them back and exchanged them.
I ran the new ones through memtest for 3 hours each stick at work today on HP DC8200E desktops and no errors. So I get home and install them and BSOD time all over again.
These are 1.5v RAM so I start doing a little research and some people are reporting turning the voltage up. First I went to 1.55v and system was ok for a bit and then BSOD. I cranked up the voltage to 1.6 and so far all is good (Knocking on wood). I ran memtest for over an hour, no errors. Played Bioshock for about an hour and still good. I am going to run memtest overnight and see how it is in the morning.
A question I have, is running 1.5v RAM @ 1.6v going to harm my RAM or damage anything else?
What is a good new FPS to play? I loved Bioshock and Crysis 1 & 2 are a lot of fun. but its time for a new game.