Could not perform start of disc at once

vbimport

#1

Hi,
I have a CD-R/RW drive model GCE-8520B and Nero 7.
Windows Xp pro Sp2.
I tried to burn cd’s and it doesnt work, it says “Could not perform start of disc at once”.
I change my CD-R/RW drive for a DVD-R Drive and it still doesnt work.
But if i change it form computer it works perfectly and if i use the same PC with windows 98 SE it works ok too.

Why is this happening?

Here is my log:

1C80000019E5MA2X40085C3611C6

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2

Recorder: <HL-DT-ST DVDRAM GSA-H12N>Version: UL01 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: < 50X CD-ROM >Version: 5.2E - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H12N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : 50X CD-ROM atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H12N D: CDRom0
50X CD-ROM E: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 28311552 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 159MB (163316kB)
Free physical memory: 115MB (117812kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.2.2007
===== Disc-Copy over image - 1st step : Copy to image …

10:21:22 #1 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:21:22 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 192KB of Memory

10:21:22 #3 Text 0 File Reader.cpp, Line 124
Reader running

10:21:22 #4 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

10:21:22 #5 Phase 48 File dlgbrnst.cpp, Line 1725
Analyzing disc

10:21:23 #6 CDCOPY -1 File CDCopy.cpp, Line 1915
The CD is copyrighted

10:21:23 #7 Text 0 File CDCopy.cpp, Line 2131
Index0 Index1 PostPause __LastBlockOfTrack
Track 1: 0 0 ( 0:02.00) 288243 288242 ( 64:05.17)

10:21:23 #8 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: OFF write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 288243 = 288243, data (TRM_DATA_MODE1, block size 2048)

10:21:23 #9 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using CD-R/RW media

10:21:23 #10 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 288242 ( 64:05.17)

10:21:23 #11 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

10:21:23 #12 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:21:23 #13 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 288243 (288243) = #288243/64:3.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 288243 blocks [Image Recorder]
--------------------------------------------------------------

10:21:23 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 590628864, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
288243 | lead-out | 1 | 0x41 | 0x00

10:21:23 #15 Phase 120 File dlgbrnst.cpp, Line 1725
Creating the image for burning

10:21:23 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:29:45 #17 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 288243 (465F3h), length 0 blocks

10:29:45 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:29:48 #19 Phase 121 File dlgbrnst.cpp, Line 1725
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image …

10:30:04 #1 Text 0 File Burncd.cpp, Line 3008
HL-DT-ST DVDRAM GSA-H12N
Buffer underrun protection activated

10:30:05 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 27648KB of Memory

10:30:05 #3 Text 0 File Reader.cpp, Line 124
Reader running

10:30:05 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ‘’
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ‘’
Blocksize = 2048
TrackMode = ‘TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 590628864
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=64:03.18 ( 288243) RecDep=0x00
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Dokumente und Einstellungen\Horst\Eigene Dateien\TempImage.nrg>

10:30:07 #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using CD-R/RW media

10:30:07 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 288242 ( 64:05.17)

10:30:07 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

10:30:07 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: HL-DT-ST DVDRAM GSA-H12N

10:30:07 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:30:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) provided
original disc pos #0 + 288243 (288243) = #288243/64:3.18
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 288243 blocks [D: HL-DT-ST DVDRAM GSA-H12N]
--------------------------------------------------------------

10:30:07 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 590628864, ISRC “”
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
288243 | lead-out | 1 | 0x41 | 0x00

10:30:07 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:30:08 #13 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (1.200 KB/s)

10:30:09 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:30:09 #15 Text 0 File MMC.cpp, Line 16934
StartDAO : CD-Text - Off

10:30:09 #16 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

10:31:08 #17 SPTI -1114 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x5D 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 10 00 00 00 80 29
Buffer x038dee00: Len x20
0x41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00
0x41 01 01 10 00 00 02 00 41 AA 01 14 00 40 05 12

10:31:08 #18 Text 0 File MMC.cpp, Line 17165
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 40 05 12

10:31:08 #19 CDR -1114 File ThreadedTransferInterface.cpp, Line 1799
Reset occurred
D: HL-DT-ST DVDRAM GSA-H12N

10:31:08 #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

10:31:09 #21 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (1.200 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

I hope someone could help


#2

You might try updating Nero.
You may need more memory.
DMA is off for the CD drive. You are not using it to burn, but it might indicate another problem and hampering the burner. See below.
http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx


#3

That early version of Nero was very buggy & could be the cause.

However, if this is an Audio CD you’re copying you could rip the tracks from it with CDex in WAV form so as to not lose any quality & then compile the CD with Burrrn & burn it. That way you’d know whether Nero is the problem.

One of the properties of the burner (in My Computer , right click on the LG) is “Recording” , best to disable CD Recording as it can interfere with burning.