"could not perform EndSession" error

vbimport

#1

I have a HP Pavillion ze5200 and i get that error when i try to burn any disk at any speed. What can i do to fix it? I’ve been reading around the forum, and people seem to need the log, so i included it at the bottom

#########

LOG START

#########

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.1.6
Recorder: <QSI CDRW/DVD SBW-241> Version: VX08 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <QSI CDRW/DVD SBW-241>Version: VX08 - HA 1 TA 0 - 6.3.1.6
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATCS04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW-241 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
QSI CDRW/DVD SBW-241 D: CDRom0

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 446MB (457712kB)
Free physical memory: 188MB (193276kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.5.2004
CD-ROM (UDF)
5:19:30 PM #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:19:30 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

5:19:30 PM #3 Text 0 File Writer.cpp, Line 124
Writer QSI CDRW/DVD SBW-241 running

5:19:30 PM #4 Text 0 File Burncd.cpp, Line 3198
Turn on Disc-at-once, using CD-R/RW media

5:19:32 PM #5 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 23379 ( 5:13.54)

5:19:32 PM #6 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:19:32 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: QSI CDRW/DVD SBW-241;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

5:19:32 PM #8 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:19:32 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 23380 (23380) = #23380/5:11.55
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 23380 blocks [QSI CDRW/DVD SBW-241]
--------------------------------------------------------------

5:19:32 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [QSI CDRW/DVD SBW-241] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 48189440, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
23380 | lead-out | 1 | 0x00 | 0x41

5:19:33 PM #11 Phase 24 File dlgbrnst.cpp, Line 1841
Caching of files started

5:19:33 PM #12 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

5:19:33 PM #13 Phase 25 File dlgbrnst.cpp, Line 1841
Caching of files completed

5:19:33 PM #14 Phase 36 File dlgbrnst.cpp, Line 1841
Burn process started at 24x (3,600 KB/s)

5:19:33 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:19:33 PM #16 Text 0 File Mmc.cpp, Line 15268
StartDAO : CD-Text - Off

5:19:33 PM #17 Text 0 File Mmc.cpp, Line 19864
Set BUFE: Super Link -> OFF

5:19:33 PM #18 Text 0 File Mmc.cpp, Line 15555
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 05 0d 37

5:19:50 PM #19 Text 0 File Cdrdrv.cpp, Line 1289
17:19:50.786 - QSI CDRW/DVD SBW-241\H1 T0 : Queue again later

5:20:24 PM #20 SCSI -1114 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x1D 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

5:20:24 PM #21 CDR -1114 File Writer.cpp, Line 304
Reset occurred

5:20:24 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:20:35 PM #23 SCSI -1114 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00

5:21:15 PM #24 CDR -1175 File Cdrdrv.cpp, Line 1241
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00

5:21:15 PM #25 SCSI -1169 File Cdrdrv.cpp, Line 1242
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x040422A8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

5:21:15 PM #26 CDR -1114 File WriterStatus.cpp, Line 164
Reset occurred
QSI CDRW/DVD SBW-241\H1 T0

5:21:15 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

5:22:06 PM #28 CDR -1175 File Cdrdrv.cpp, Line 1241
Internal trace
Resending of command failed after 30000ms
CDB Data[hex]: 5A 00 05 00 00 00 00 00 48 00

5:22:06 PM #29 SCSI -1169 File Cdrdrv.cpp, Line 1242
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x040422A8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

5:22:06 PM #30 Text 0 File dlgbrnst.cpp, Line 1699
Set remaining time: 0:00,000 (0ms) -> OK

5:22:06 PM #31 CDR -1169 File WriterStatus.cpp, Line 169
Logical unit not ready, operation in progress

5:22:06 PM #32 TRANSFER -39 File WriterStatus.cpp, Line 169
Could not perform EndSession

5:22:57 PM #33 Phase 38 File dlgbrnst.cpp, Line 1841
Burn process failed at 24x (3,600 KB/s)

5:23:27 PM #34 SCSI -1169 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x04 0x08

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/28/2002 8:27:50 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#2

i had the same problem. dont bother finalizing, then you won’t have a problem.
probably media related anyway, i have had no such problems since i changed to using imation cd-r.


#3

If the cd’s continue to burn with errors then you need to use a CD-r media of speed 1-16x. The QSI (Quanta Storage INC.) SBW-241 was designed using these low speed media but will still write at 24x on these CD-Rs. The reason why so many people are getting errors is because the QSI SBW-241 was not modified to work with high speed discs, that is why cd-rw discs work because they have a speed of 1-10x.

Try Ricoh 1-8x discs, they work perfectly on the QSI SBW-241 and can be written at 24x MAX too!!!