Could not perform end of Disc-at-once

I have scoured the internet to try to figure out what is wrong with my Lite-on burner or Nero to no avail. I was able to successfully burn a couple DVD-R with this drive before, but now I constantly get failures. I updated the firmware to the latest and I am using Nero 7 Essentials. Here is the log…please help!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.13.1
Internal Version: 7, 5, 13, 1
(Nero Express)
Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0N - HA 1 TA 3 - 7.5.13.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITE-ON DVDRW LH-20A1P >Version: KL0N - HA 1 TA 3 - 7.5.13.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1P nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD2000JD-00HBB0 nvatabus Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TOSHIBA CD/DVDW SD-R5372 F: CDRom0
LITE-ON DVDRW LH-20A1P G: CDRom3

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096612kB)
Free physical memory: 1535MB (1572180kB)
Memory in use : 25 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

1.7.2007
Burn DVD Image
1:21:17 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

1:21:17 AM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ‘’
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ‘’
Blocksize = 2048
TrackMode = ‘TRM_DATA_MODE1’
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 2439086080
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <D:\PhotoDisc2.nrg>

1:21:17 AM #3 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

1:21:51 AM #4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1190959 (264:39.34, 2326MB)

1:21:51 AM #5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

1:21:51 AM #6 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

1:21:51 AM #7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<

Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL, DVD-RAM.)

1:21:51 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1190960 (1190960) = #1190960/264:39.35
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1190960 blocks [G: LITE-ON DVDRW LH-20A1P]

1:21:51 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [G: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2439086080, ISRC “”
DAO layout:

__Start|___Track|Idx|CtrlAdr|Size|NWA|RecDep
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1190960 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1190960 | 0 | 0x00
1190960 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

1:21:51 AM #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

1:21:51 AM #11 Phase 28 File dlgbrnst.cpp, Line 1760
Speed measurement started

1:21:51 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:23:32 AM #13 Text 0 File WriterStatus.cpp, Line 113
<G: LITE-ON DVDRW LH-20A1P> start writing Lead-Out at LBA 1190960 (122C30h), length 0 blocks

1:23:32 AM #14 Phase 29 File dlgbrnst.cpp, Line 1709
Speed measurement completed: 17.1x (23,604 KB/s)

1:23:32 AM #15 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 16x (22,160 KB/s)

1:23:33 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

1:23:33 AM #17 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode

1:23:33 AM #18 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: Yes

1:23:33 AM #19 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`…0@P…!..
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

1:24:28 AM #20 Text 0 File Cdrdrv.cpp, Line 1311
01:24:28.531 - G: LITE-ON DVDRW LH-20A1P : Queue again later

1:24:42 AM #21 SPTI -1114 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x22040080: Len x10000
0x01 00 22 00 00 00 01 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1:24:42 AM #22 CDR -1114 File Writer.cpp, Line 299
Reset occurred
G: LITE-ON DVDRW LH-20A1P

1:24:42 AM #23 Text 0 File DVDR.cpp, Line 3468
EndDAO: Last written address was 31

1:24:49 AM #24 CDR -1076 File WriterStatus.cpp, Line 162
Disc changed
G: LITE-ON DVDRW LH-20A1P

1:24:49 AM #25 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

1:24:50 AM #26 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 16x (22,160 KB/s)

1:24:50 AM #27 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

1:24:52 AM #28 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

1:24:52 AM #29 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 7:42:42 PM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.41a, size=36560 bytes, created 9/27/2006 2:53:22 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

=== Scsi-Device-Map ===
CdRomPeripheral : TOSHIBA CD/DVDW SD-R5372 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LH-20A1P nvatabus Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD2000JD-00HBB0 nvatabus Port 1 ID 0 DMA: Off

Your DMA is off on all your drives, turn them on.
Others might notice more things wrong :slight_smile:

Reset DMA tool if needed:
http://svp.co.uk/helpdesk/index.php?_m=downloads&_a=viewdownload&downloaditemid=15&nav=0

Info on DMA:
http://www.michna.com/kb/WxDMA.htm
http://club.cdfreaks.com/showpost.php?p=1712829&postcount=5

Latest firmware isn’t always best. My LiteOn SHM-165P6S encountered same error you’re getting with MCC004 media and latest firmware, but flash back to next to latest firmware resolved the problem. My problem occurred only with MCC004 which means switching to different media may help as well.

Welcome to the forum :slight_smile:

Nero might be misreporting the DMA as nVidia drivers are being used. Even so, I’d suggest that you lose the nVidia IDE drivers and use the default MS ones.

Also try lowering the speed a notch on those CMC MAG AM3 discs.

Wow thanks for the fast responses. Can you point me to the where I would get the nVidia drivers? I usually just get them through MSI since that is the mb manufacturer.

Thanks!

No, I’m saying try the default MS IDE drivers instead of the nVidia ones (the other nVidia drivers are fine, it’s just the IDE drivers which would be worth uninstalling for troubleshooting purposes).

There might be the option to uninstall them via Add/Remove Programs, or you can rollback to the MS IDE drivers.

Someone else may have to help you with those, I don’t have a nVidia chipset :slight_smile:

This media is no good choice, especially not for 16x.
I would try with other media.