Could not perform end of Disc-at-once

vbimport

#1

Not sure what i did…but I’m now getting this error while burning dvd image file. Burning with px760a using nero, I have the latest in firmware and nero.

I also get this in the error message:

Invalid field in command
Could not perform end of Disc-at-once
Burn process failed at 16x (22,160 KB/s)

any help…much appreciated


#2

Try different brand of media.


#3

First we need details of the media you’re using. Might be a case of the media being not so good.

Try burning at a lower speed, say 8x or 12x. Very rarely do I burn at the full 16x, except for testing purposes.


#4

The disk are office depot came in 100 pack burned 90 of them at 16x…i get these errors like 30 - 40 secs into burn


#5

Can you post the entire log file if you have it? That will show us some good info, like DMA settings and the mediacode for the discs. :slight_smile:

As I said though, do try at a lower speed, they may work fine.


#6

Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 8:20:56 AM
ahead WinASPI: File ‘C:\Program Files\Ahead\Nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
Nero Version: 6.6.0.6
Recorder: <PLEXTOR DVDR PX-760A> Version: 1.06 - HA 2 TA 0 - 6.6.0.6
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SCSI DVD-ROM >Version: 1.0 - HA 0 TA 0 - 6.6.0.6
Adapter driver: <VClone> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : SCSI DVD-ROM 1.0 VClone Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00FUA0 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : PLEXTOR DVDR PX-760A atapi Port 2 ID 0 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W2410A atapi Port 2 ID 1 DMA: On
DiskPeripheral : Promise 1+0 Stripe/RAID01.10 fasttx2k Port 5 ID 0 DMA: Off

=== CDRom-Device-Map ===
SCSI DVD-ROM H: CDRom2
PLEXTOR DVDR PX-760A F: CDRom4
PLEXTOR CD-R PX-W2410A G: CDRom1

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048084kB)
Free physical memory: 464MB (475356kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.1.2007
Burn DVD Image
4:47:40 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

4:47:40 PM #2 Text 0 File Writer.cpp, Line 122
Writer PLEXTOR DVDR PX-760A running

4:47:40 PM #3 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media

4:48:02 PM #4 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1295769 (287:56.69, 2530MB)

4:48:02 PM #5 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)

4:48:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 2311
Recorder: PLEXTOR DVDR PX-760A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

4:48:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

4:48:02 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1295770 (1295770) = #1295770/287:56.70
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1295770 blocks [PLEXTOR DVDR PX-760A]
--------------------------------------------------------------

4:48:02 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [PLEXTOR DVDR PX-760A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2653736960, ISRC ""
DAO layout:
===========
Start|Track|Idx|CtrlAdr|RecDep_____
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1295770 | lead-out | 1 | 0x41 | 0x00

4:48:03 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

4:48:03 PM #11 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.

4:48:03 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

4:48:03 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)

4:48:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:48:03 PM #15 Text 0 File Cdrdrv.cpp, Line 8332
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16…63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 …RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7…Ds…m…
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 …

4:48:03 PM #16 Text 0 File DVDPlusRW.cpp, Line 615
Start write address at LBA 0
DVD high compatibility mode: No

4:48:05 PM #17 Text 0 File Cdrdrv.cpp, Line 1284
16:48:05.375 - PLEXTOR DVDR PX-760A\H2 T0 : Queue again later

4:48:24 PM #18 SCSI -1039 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x04B20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x09 0x02

4:48:24 PM #19 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error

4:48:24 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:48:24 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:48:24 PM #22 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

4:48:24 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

4:48:24 PM #24 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command

4:48:24 PM #25 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

4:48:24 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)

Existing drivers:
File ‘Drivers\ASPI32.SYS’: Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 7:53:02 AM
File ‘WNASPINT.DLL’: Ver=V1.18, size=57344 bytes, created 3/19/2006 11:00:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 4/6/2006 1:15:29 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 3:59:44 PM (Adapter driver for rec)
File ‘Drivers\VClone.sys’: Ver=5, 0, 2, 1, size=22656 bytes, created 12/13/2004 6:51:47 AM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


#7

Thanks for posting that :slight_smile:

Try the media at 8x or 12x, as I said, and see how you get on. I’ve had good luck with RICOHJPN R03 at those speeds, although not OD branded.

If that fails, uninstall your virtual drive and try again.


#8

tried to burn at 6x same error…will try and remove virtual drive. I think i messed up something uninstalling and reinstalling different versions of nero


#9

removing virtual drive didn’t work same error…helllllp…hehe


#10

Only thing I can suggest now is trying some different media, as TCAS suggested above…:slight_smile:


#11

trying different media worked…thanks everyone…confused still why out of a 100 pack, I kid you not 90 of them burned fine. Not sure if its office depot’s brand but my recorder all of sudden doesn’t like RICOHJPN R03.


#12

The word for that is “variable”, which RICOHJPN R03 is. Glad switching media helped :clap: