"could not perform end of disc-at-once" sohw-1633s

heyy guys! i just bought my dvd burner today! i burned 3 cd so far… they weren’t succesful. I’m using FijuFilm DVD-R 4.7 gig. (is that good or bad media?)
my first try, it ended at 100%… and then the error “could not perform end of disc at once”, yet, i can read the cd, and it works perfectly… i just dont like the fact that there’s an error. this is what i enabled

[b]Determine maximum speed : TRUE
Simulate                : FALSE
Write                   : TRUE
Finalize CD             : TRUE
Multisession            : FALSE
Burning mode            : TAO
Mode                    : 1
ISO Level               : 1 (Max. of 11 = 8 + 3 char)
Character set           : ISO 9660
Joliet                  : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path  : TRUE
Write ISO9660 ;1 file extensions        : TRUE[/b]

my second try, stuck around 9%. it said “Error reading data”. after a while, i saw it didnt do nothing… so i canceled. dvd is dead.

[b]Determine maximum speed : TRUE
Simulate                : FALSE
Write                   : TRUE
Finalize CD             : FALSE
Multisession            : FALSE
Burning mode            : DAO
Mode                    : 1
ISO Level               : 1 (Max. of 11 = 8 + 3 char)
Character set           : ISO 9660
Joliet                  : TRUE[/b]

third try, it ended at 100%. but same error message as the first one, “cannot perform end of disc-at-once”. but this time, i can’t read the dvd. it’s 0kb left and 0kb total size. this is the log of the third one.

------------history log
Aktee
Pimp
1A20-0218-0370-1725-8155-4331*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.11 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0C - HA 1 TA 0 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <ASUS CD-S520/A >Version: 1.8K - HA 1 TA 1 - 6.3.1.11
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ASUS CD-S520/A atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S D: CDRom6
ASUS CD-S520/A F: CDRom4
Generic DVD-ROM E: CDRom2

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261664kB)
Free physical memory: 82MB (84136kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.10.2004
ISO compilation
5:19:40 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

5:19:41 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

5:19:41 PM #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running

5:19:41 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

5:19:41 PM #5 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-at-once, using DVD media

5:19:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2260367 (502:18.17, 4414MB)

5:19:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

5:19:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 03
Disc Application Code: 64, Disc Physical Code: 193

5:19:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:19:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2260368 (2260368) = #2260368/502:18.18
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2260368 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

5:19:41 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4629233664, ISRC “”
DAO layout:
===========
_Start|___Track|Idx|RecDep|CtrlAdr
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2260368 | lead-out | 1 | 0x00 | 0x41

5:19:41 PM #12 Phase 24 File dlgbrnst.cpp, Line 1836
Caching of files started

5:19:42 PM #13 Text 0 File Burncd.cpp, Line 4206
Cache writing successful.

5:19:42 PM #14 Phase 25 File dlgbrnst.cpp, Line 1836
Caching of files completed

5:19:42 PM #15 Phase 32 File dlgbrnst.cpp, Line 1836
Simulation started at 2x (2,760 KB/s)

5:19:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:19:42 PM #17 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 27:56,959 (1676959ms) -> OK

5:19:42 PM #18 Text 0 File DVDR.cpp, Line 1664
Recording mode: Sequential Recording Mode

5:19:42 PM #19 Text 0 File Mmc.cpp, Line 20125
Set BUFE: supported -> ON , SMART-BURN : ON

5:19:42 PM #20 Text 0 File DVDR.cpp, Line 1805
Start write address at LBA 0
DVD high compatibility mode: Yes

5:19:42 PM #21 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:19:43 PM #22 Text 0 File Cdrdrv.cpp, Line 1293
17:19:43.921 - LITE-ON DVDRW SOHW-1633S\H1 T0 : Queue again later

5:20:23 PM #23 Text 0 File Cdrdrv.cpp, Line 1293
17:20:23.921 - LITE-ON DVDRW SOHW-1633S\H1 T0 : Queue again later

5:48:32 PM #24 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2260368 (227D90h), lenght 0 blocks

5:48:32 PM #25 Text 0 File Cdrdrv.cpp, Line 1293
17:48:32.203 - LITE-ON DVDRW SOHW-1633S\H1 T0 : Queue again later

5:49:11 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:49:11 PM #27 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was 2260367

5:49:11 PM #28 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:49:11 PM #29 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

5:49:15 PM #30 Phase 33 File dlgbrnst.cpp, Line 1836
Simulation completed successfully at 2x (2,760 KB/s)

5:49:16 PM #31 Phase 36 File dlgbrnst.cpp, Line 1836
Burn process started at 2x (2,760 KB/s)

5:49:16 PM #32 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:49:16 PM #33 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 27:56,959 (1676959ms) -> OK

5:49:16 PM #34 Text 0 File DVDR.cpp, Line 1664
Recording mode: Sequential Recording Mode

5:49:16 PM #35 Text 0 File Mmc.cpp, Line 20125
Set BUFE: supported -> ON , SMART-BURN : ON

5:49:16 PM #36 Text 0 File DVDR.cpp, Line 1805
Start write address at LBA 0
DVD high compatibility mode: Yes

5:49:16 PM #37 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16…63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 …

5:49:31 PM #38 Text 0 File Cdrdrv.cpp, Line 1293
17:49:31.046 - LITE-ON DVDRW SOHW-1633S\H1 T0 : Queue again later

6:18:17 PM #39 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2260368 (227D90h), lenght 0 blocks

6:18:17 PM #40 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:18:17 PM #41 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was 2260367

6:18:29 PM #42 SCSI -1176 File Cdrdrv.cpp, Line 1187
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

6:18:29 PM #43 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

6:18:29 PM #44 CDR -1176 File ThreadedTransferInterface.cpp, Line 1701
Session fixation error

6:18:29 PM #45 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1701
Could not perform end of Disc-at-once

6:18:29 PM #46 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was -1

6:18:29 PM #47 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

6:18:29 PM #48 Text 0 File dlgbrnst.cpp, Line 1694
Set remaining time: 0:00,000 (0ms) -> OK

6:18:29 PM #49 Phase 38 File dlgbrnst.cpp, Line 1836
Burn process failed at 2x (2,760 KB/s)

Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:05:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

heeeeeelp!! :frowning: i won’t burn 'til i get an answer. thanks all! :slight_smile:

Why buy inferior dvd-r’s? Get the good DVD+r’s. Much better.

hmm i don’t really understand what is dvd-r and dvd+r. i thought it was just a mistype or something to make the label fancier. hahaha :expressionless: omg. anyway… so do you think that makes the error? there’s 23 dvd’s left, i don’t wanna waste 'em… :frowning:

Get some good DVD+R’s!

YAYYYYY! i found my way!
I used NERO BURNING ROM instead of that Nero Express thing. i did UDF/ISO data dvd… worked perfectly! yeah!! :slight_smile: cool. thanks anywya!