Could not perform end of Disc-at-once - Error. Log included

vbimport

#1

Keep getting the error no matter the size of the data I’m writing to the disc.

Scott
Skedoozy

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Ahead
ero\Wnaspi32.dll’: Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 3:25:04 PM
Nero version: 6.0.0.9
Recorder: <MATSHITA DVD-RAM SW-9585>Version: B100 - HA 1 TA 1 - 6.0.0.9
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHG - HA 1 TA 0 - 6.0.0.9
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM SW-9585 atapi Port 1 ID 1 DMA: On

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1047556kB)
Free physical memory: 406MB (416076kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

10.7.2005
ISO compilation
4:09:06 PM #1 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings

Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

4:09:06 PM #2 Text 0 File Reader.cpp, Line 118
Reader running

4:09:06 PM #3 Text 0 File Writer.cpp, Line 127
Writer MATSHITA DVD-RAM SW-9585 running

4:09:06 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

4:09:06 PM #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

4:09:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 1351471 (300:19.46)

4:09:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

4:09:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: MATSHITA DVD-RAM SW-9585, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R04, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

4:09:07 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1351472 (1351472) = #1351472/300:19.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1351472 blocks [MATSHITA DVD-RAM SW-9585 ]

4:09:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [MATSHITA DVD-RAM SW-9585 ] for write in CUE-sheet-DAO
DAO infos:

MCN: “”
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 2768121856, ISRC “”
DAO layout:

_Start|___Track|Idx|RecDep|CtrlAdr
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1351472 | lead-out | 1 | 0x00 | 0x41

4:09:07 PM #11 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

4:09:07 PM #12 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

4:09:07 PM #13 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 8x (11,040 KB/s)

4:09:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:09:07 PM #15 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 07 50 52 4F 44 49 53 - 43 00 52 30 34 04 38 23 …PRODISC.R04.8#
54 37 0F 02 54 6B 02 94 - 63 15 15 0B 0A 08 08 01 T7…Tk…c…
1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 01 …

4:09:07 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 4:23,559 (263559ms) -> OK

4:09:07 PM #17 Text 0 File DVDPlusRW.cpp, Line 553
Start write address at LBA 0
DVD high compatibility mode: No

4:15:28 PM #18 Text 0 File WriterStatus.cpp, Line 113
<MATSHITA DVD-RAM SW-9585 > start writing Lead-Out at LBA 1351472 (149F30h), lenght 0 blocks

4:15:28 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

4:15:45 PM #20 SCSI -1176 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

4:15:45 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

4:15:45 PM #22 CDR -1176 File ThreadedTransferInterface.cpp, Line 1620
Session fixation error

4:15:45 PM #23 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1620
Could not perform end of Disc-at-once

4:15:45 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

4:15:45 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

4:15:45 PM #26 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 8x (11,040 KB/s)

Existing drivers:
File ‘Drivers\ADPU160M.SYS’: Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File ‘Drivers\CDRALW2K.SYS’: Ver=5.2.0.91, size=23724 bytes, created 1/16/2003 10:08:33 AM
File ‘WNASPINT.DLL’: Ver=5, 0, 0, 1, size=57344 bytes, created 6/13/2001 11:30:32 PM
File ‘Drivers\PXHELP20.SYS’: Ver=2.02.62a, size=20016 bytes, created 10/28/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\atapi.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Could it just be the media? I got it like 5 times. I have burned another disc successfully but it was a very old DVD disc and it was only a 1x.


#2

please edit your post and remove nero’s serial (which is on line3 of the log) and avoid posting it in the future

there are several possible reasons

a) firmware not liking the media or media plain bad ,update to latest firmware and retry with same media if it wont go well than try another media brand

b) software,remove nero using the ‘clean tool’ ftp://ftp9.nero.com/attach/Nero-CleanTool.zip and grab the latest nero http://www.filemirrors.com/search.src?type=begins&file=Nero-6.6.0.15.exe&action=Find

c) burner itself,hardware malfunction


#3

I tried to edit the post but it wont let me that I see… not in the thread tools. I may just be blind.

I think this is the latest version of the firmware. :confused: I’ll try uninstalling and upgrading. Thanks. L(

Edit: I can edit this post, so time must have run out on the other. Sorry.


#4

Done.